Xiangkui Zhou¹, Kai Wang¹, Zhifeng Xu¹, Qiang Wang², Guojian Li^1,, Jicheng He^1,

CMC-Computers, Materials & Continua, Vol.41, No.2, pp. 153-162, 2014, DOI:10.3970/cmc.2014.041.153

Abstract At present, the functionally gradient cemented carbide (FGCC) substrate with enrich cobalt on surface is mainly formed from medium grained WC grains. In order to further improve the properties of gradient cemented carbides, the ultrafine powder was chosen in this study and the functionally gradient cemented carbide with ultrafine grains was prepared by a two-step process, where the cemented carbide is first lower pressure pre-sintered and then subjected to a gradient sintering. The results show that it is possible to form gradient layer with enriched cobalt on surface by this method and also the grain growth can be inhibited by… More >

Y.C. Shiah¹, Y.M. Lee², T.C. Huang²

CMC-Computers, Materials & Continua, Vol.39, No.1, pp. 49-71, 2014, DOI:10.3970/cmc.2014.039.049

Abstract A common difficulty arises in characterizing the anisotropic properties of a thin sheet of anisotropic material, especially in the transverse direction. This difficulty is even more phenomenal for measuring its mechanical properties on account of its thickness. As the prelude of such investigation, this paper proposes a novel approach to identify the thermal conductivities of an unknown thin layer of anisotropic material. For this purpose, the unknown layer is sandwiched in isotropic materials with known conductivities. Prescribing proper boundary conditions, one may easily measure temperature data on a few sample boundary points. Therefore, the anisotropic thermal conductivities can be calculated… More >

X.P. Shen, A. Diaz¹, T. Sheehy²

CMC-Computers, Materials & Continua, Vol.20, No.3, pp. 205-224, 2010, DOI:10.3970/cmc.2010.020.205

Abstract This paper presents a case study for the design of a mud-weight window (MWW) with three-dimensional (3-D), finite-element (FE) tools for subsalt wells. The trajectory of the target well penetrates a 7 km thick salt body. A numerical scheme has been proposed for calculating the shear failure gradient (SFG) and fracture gradient (FG) with 3-D FE software. User subroutines have been developed to address non-uniform pore-pressure distribution. A series of FE calculations were performed to obtain the MWW of the target wellbore, which consists of the SFG and FG for the subsalt sections. Although no reverse faulting structure exists in… More >

J. Wang¹, D. C. C. Lam²

CMC-Computers, Materials & Continua, Vol.17, No.3, pp. 215-232, 2010, DOI:10.3970/cmc.2010.017.215

Abstract Selected elastic moduli of nanocomposites are higher than the elastic moduli of microcomposites. Molecular immobilization and crystallization at the interfaces had been proposed as potential causes, but studies suggested that these effects are minor and cannot be used to explain the magnitude observed in nanocomposites with >3nm particles. Alternately, molecular simulation of polymer deformation showed that rotation gradients can lead to additional molecular rotations and stiffen the matrix. The stiffening is characterized by the nanostiffening material parameter, l2. In this investigation, an analytical expression for nanostiffening in nanocomposites was developed using finite element analysis. The nanostiffening in nanocomposites was determined… More >

Veturia Chiroiu¹, Ligia Munteanu¹, Pier Paolo Delsanto²

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 75-100, 2010, DOI:10.3970/cmc.2010.016.075

Abstract Conventional continuum theories are unable to capture the observed indentation size effects, due to the lack of intrinsic length scales that represent the measures of nanostructure in the constitutive relations. In order to overcome this deficiency, the Toupin-Mindlin strain gradient theory of nanoindentation is formulated in this paper and the size dependence of the hardness with respect to the depth and the radius of the indenter for multiple walled carbon nanotubes is investigated. Results show a peculiar size influence on the hardness, which is explained via the shear resistance between the neighboring walls during the buckling of the multiwalled nanotubes. More >

Xiaohua Hu¹, Gordana A. Cingara¹, David S. Wilkinson¹, Mukesh Jain², PeidongWu², Raja K. Mishra³

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 99-124, 2009, DOI:10.3970/cmc.2009.014.099

Abstract This work aims to understand the texture distribution in the localized necking band formed during uni-axial tension of AA5754 using an edge-constrained, plane strain post-necking FE model. The model domain is a long cross section of the band. Initial grain structure is mapped into the mesh from EBSD data using a modified Voroni-cell interpolation and considering pre-straining prior to localized necking. The material points in grains are assumed to exhibit isotropic elastoplastic behavior but have a relative strength in terms of Taylor factors which are updated by a Taylor-Bishop-Hill model. The predicted textures and gradients within the localized necking band… More >