J.N. Johnson¹, J.M. Owen²

CMES-Computer Modeling in Engineering & Sciences, Vol.22, No.3, pp. 165-188, 2007, DOI:10.3970/cmes.2007.022.165

Abstract In this paper, we propose a Meshless Local Petrov-Galerkin method for studying the diffusion of a magnetic field within a non-magnetic (μ = μ₀) conducting medium with non-homogeneous and anisotropic electrical resistivity. We derive a local weak form for the magnetic diffusion equation and discuss the effects of different trial/test functions and nodal spacings on its solution. We then demonstrate that the method produces convergent results for several relevant one-dimensional test problems for which solutions are known. This method has the potential to be combined with other mesh-free methods such as Smoothed Particle Hydrodynamics (SPH) to solve problems in resistive… More >

H.B. Chen¹, D.J. Fu¹, P.Q. Zhang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.2, pp. 85-98, 2007, DOI:10.3970/cmes.2007.020.085

Abstract Researches today show that, both approximation and dispersion errors are encountered by classical Galerkin FEM solutions for Helmholtz equation governing the harmonic wave propagation, which leads to numerical inaccuracies especially for high wave number cases. In this paper, Local Boundary Integral Equation Method (LBIEM) is firstly implemented to solve the boundary value problem of Helmholtz equation. Then the regularized LBIE is proposed to overcome the singularities of the boundary integrals in the LBIEM. Owing to the advantages of the Moving Least Square Approximation (MLSA), the frequency-dependent basis functions modified by the harmonic wave propagation solutions are easily adopted instead of… More >

Chany Lee¹, Chang-Hwan Im², Hyun-Kyo Jung³, Hong-Kyu Kim⁴, Do Wan Kim⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.1, pp. 35-42, 2007, DOI:10.3970/cmes.2007.020.035

Abstract In the present study, a residual-based a posteriori error estimation for a kind of meshless method, called fast moving least square reproducing kernel (FMLSRK) method is proposed. The proposed error estimation technique does not require any integration cells in evaluating error norm but recovers the exact solutions in a virtual area defined by a dilation parameter of FMLSRK and node density. The proposed technique was tested on typical electrostatic problems with gird or random node sets and the simulation results show that the proposed error estimation technique can be applied to adaptive node refinement process for more efficient meshless analysis… More >

T. Jarak¹, J. Sorić¹, J. Hoster¹

CMES-Computer Modeling in Engineering & Sciences, Vol.18, No.3, pp. 235-246, 2007, DOI:10.3970/cmes.2007.018.235

Abstract A meshless computational method based on the local Petrov-Galerkin approach for the analysis of shell structures is presented. A concept of a three dimensional solid, allowing the use of completely 3-D constitutive models, is applied. Discretization is carried out by using both a moving least square approximation and polynomial functions. The exact shell geometry can be described. Thickness locking is eliminated by using a hierarchical quadratic approximation over the thickness. The shear locking phenomena in case of thin structures and the sensitivity to rigid body motions are minimized by applying interpolation functions of sufficiently high order. The numerical efficiency of… More >

J. Sorić¹, Q. Li², T. Jarak¹, S.N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.4, pp. 349-358, 2004, DOI:10.3970/cmes.2004.006.349

Abstract An efficient meshless formulation based on the Local Petrov-Galerkin approach for the analysis of shear deformable thick plates is presented. Using the kinematics of a three-dimensional continuum, the local symmetric weak form of the equilibrium equations over the cylindrical shaped local sub-domain is derived. The linear test function in the plate thickness direction is assumed. Discretization in the in-plane directions is performed by means of the moving least squares approximation. The linear interpolation over the thickness is used for the in-plane displacements, while the hierarchical quadratic interpolation is adopted for the transversal displacement in order to avoid the thickness locking… More >

J. Sladek¹, V. Sladek¹, S.N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.6, No.3, pp. 309-318, 2004, DOI:10.3970/cmes.2004.006.309

Abstract Meshless methods based on the local Petrov-Galerkin approach are proposed for solution of steady and transient heat conduction problem in a continuously nonhomogeneous anisotropic medium. Fundamental solution of the governing partial differential equations and the Heaviside step function are used as the test functions in the local weak form. It is leading to derive local boundary integral equations which are given in the Laplace transform domain. The analyzed domain is covered by small subdomains with a simple geometry. To eliminate the number of unknowns on artificial boundaries of subdomains the modified fundamental solution and/or the parametrix with a convenient cut-off… More >

Q. Li¹, S. Shen¹, Z. D. Han¹, S. N. Atluri¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.5, pp. 571-586, 2003, DOI:10.3970/cmes.2003.004.571

Abstract In this paper, a truly meshless method, the Meshless Local Petrov-Galerkin (MLPG) Method, is developed for three-dimensional elasto-statics. The two simplest members of MLPG family of methods, the MLPG type 5 and MLPG type 2, are combined, in order to reduce the computational requirements and to obtain high efficiency. The MLPG5 method is applied at the nodes inside the 3-D domain, so that any domain integration is eliminated altogether, if no body forces are involved. The MLPG 2 method is applied at the nodes that are on the boundaries, and on the interfaces of material discontinuities, so that the boundary… More >

S. N. Atluri¹, Z. D. Han¹, S. Shen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.5, pp. 507-518, 2003, DOI:10.3970/cmes.2003.004.507

Abstract The general Meshless Local Petrov-Galerkin (MLPG) type weak-forms of the displacement & traction boundary integral equations are presented, for solids undergoing small deformations. These MLPG weak forms provide the most general basis for the numerical solution of the non-hyper-singular displacement and traction BIEs [given in Han, and Atluri (2003)], which are simply derived by using the gradients of the displacements of the fundamental solutions [Okada, Rajiyah, and Atluri (1989a,b)]. By employing the various types of test functions, in the MLPG-type weak-forms of the non-hyper-singular dBIE and tBIE over the local sub-boundary surfaces, several types of MLPG/BIEs are formulated, while also… More >

Jin Yeon Cho¹

CMC-Computers, Materials & Continua, Vol.5, No.2, pp. 99-116, 2007, DOI:10.3970/cmc.2007.005.099

Abstract A novel way is proposed to fulfill Kronecker delta condition in moving least squares (MLS) approximation along the essential boundary. In the proposed scheme, the original MLS weight is modified to boundary interpolatable (BI) weight based on the observation that the support of weight function is exactly the same as the support of MLS nodal shape function. The BI weight is zero along the boundary edges except the edges containing the nodal point associated with the concerned weight. In order to construct the BI weight from the original weight, concept of edge distance function is introduced, and the BI weight… More >

Leiting Dong^1,2, Robert Haynes³, Satya N. Atluri²

CMC-Computers, Materials & Continua, Vol.45, No.1, pp. 1-16, 2015, DOI:10.3970/cmc.2015.045.001

Abstract In this study, we propose to approximate the a－n relation as well as the da/dn－∆K relation, in fatigue crack propagation, by using the Moving Least Squares (MLS) method. This simple approach can avoid the internal inconsistencies caused by the celebrated Paris’ power law approximation of the da/dn－∆K relation, as well as the error caused by a simple numerical differentiation of the noisy data for a－n measurements in standard fatigue tests. Efficient, accurate and automatic simulations of fatigue crack propagation can, in general, be realized by using the currently developed MLS law as the “fatigue engine” [da/dn versus ∆K], and using… More >