Abhishek Sharma¹, Sushank Chaudhary^2,*, Jyoteesh Malhotra³, Muhammad Saadi⁴, Sattam Al Otaibi⁵, Lunchakorn Wuttisittikulkij²

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5399-5410, 2022, DOI:10.32604/cmc.2022.031173

Abstract Recent reports from World Health Organization (WHO) show the impact of human negligence as a serious concern for road accidents and casualties worldwide. There are number of reasons which led to this negligence; hence, need of intelligent transportation system (ITS) gains more attention from researchers worldwide. For achieving such autonomy different sensors are involved in autonomous vehicles which can sense road conditions and warn the control system about possible hazards. This work is focused on designing one such sensor system which can detect and range multiple targets under the impact of adverse atmospheric conditions. A high-speed Linear Frequency Modulated Continuous… More >

S. Senthilmurugan^1,*, K. Gunaseelan²

Intelligent Automation & Soft Computing, Vol.35, No.2, pp. 1323-1336, 2023, DOI:10.32604/iasc.2023.027650

Abstract A design of a high-speed multi-core processor with compact size is a trending approach in the Integrated Circuits (ICs) fabrication industries. Because whenever device size comes down into narrow, designers facing many power density issues should be reduced by scaling threshold voltage and supply voltage. Initially, Complementary Metal Oxide Semiconductor (CMOS) technology supports power saving up to 32 nm gate length, but further scaling causes short severe channel effects such as threshold voltage swing, mobility degradation, and more leakage power (less than 32) at gate length. Hence, it directly affects the arithmetic logic unit (ALU), which suffers a significant power… More >

Lixing Zheng^1,*, Weibo Wang², Yiyan Zhang¹, Lingmei Wang³, Wei Lu²

CMES-Computer Modeling in Engineering & Sciences, Vol.133, No.1, pp. 153-170, 2022, DOI:10.32604/cmes.2022.021235

Abstract An improved model to calculate the length of the mixing chamber of the ejector was proposed on the basis of the Fano flow model, and a method to optimize the structures of the mixing chamber and diffuser of the ejector was put forward. The accuracy of the model was verified by comparing the theoretical results calculated using the model to experimental data reported in literature. Variations in the length of the mixing chamber L_m and length of the diffuser L_d with respect to variations in the outlet temperature of the ejector T_c, outlet pressure of the ejector p_c, and the… More >

Kotchaporn Karoon, Yupaporn Areepong^*, Saowanit Sukparungsee

Computer Systems Science and Engineering, Vol.44, No.2, pp. 1143-1160, 2023, DOI:10.32604/csse.2023.025420

Abstract The Extended Exponentially Weighted Moving Average (extended EWMA) control chart is one of the control charts and can be used to quickly detect a small shift. The performance of control charts can be evaluated with the average run length (ARL). Due to the deriving explicit formulas for the ARL on a two-sided extended EWMA control chart for trend autoregressive or trend AR(p) model has not been reported previously. The aim of this study is to derive the explicit formulas for the ARL on a two-sided extended EWMA control chart for the trend AR(p) model as well as the trend AR(1)… More >

P. Thilagavathi^*, S. Karthikeyan

Intelligent Automation & Soft Computing, Vol.34, No.3, pp. 2035-2050, 2022, DOI:10.32604/iasc.2022.026651

Abstract Test data volume reduction and power consumption during testing time outlines are two main problems for Very Large Scale Integration (VLSI) gadgets. Most the code-based arrangements have been utilized to diminish test data volume, although the most notable way that test data volume is high. The switching action that happens between the test carriers leads would expand power consumption. This work presents a compression/decompression methodology for limiting the amount of test data that should be kept on a tester and conveyed to each center in a System on a Chip (SOC) during a test utilizing the Adaptive Multiscale Transformation Run… More >

Miao Xu¹, Bo Zhu^1,*, Chunmei Chen¹, Yuwei Wan²

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 1707-1722, 2022, DOI:10.32604/cmc.2022.027708

Abstract It is not uncommon that two or more related process quality characteristics are needed to be monitored simultaneously in production process for most of time. Meanwhile, the observations obtained online are often serially autocorrelated due to high sampling frequency and process dynamics. This goes against the statistical I.I.D assumption in using the multivariate control charts, which may lead to the performance of multivariate control charts collapse soon. Meanwhile, the process control method based on pattern recognition as a non-statistical approach is not confined by this limitation, and further provide more useful information for quality practitioners to locate the assignable causes… More >

Muhammad Sajjad¹, Tariq Shah^1,*, Mohammad Mazyad Hazzazi², Adel R. Alharbi³, Iqtadar Hussain⁴

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 1177-1194, 2022, DOI:10.32604/cmc.2022.025245

Abstract The decoding algorithm for the correction of errors of arbitrary Mannheim weight has discussed for Lattice constellations and codes from quadratic number fields. Following these lines, the decoding algorithms for the correction of errors of length cyclic codes over quaternion integers of Quaternion Mannheim weight one up to two coordinates have considered. In continuation, the case of cyclic codes of lengths and has studied to improve the error correction efficiency. In this study, we present the decoding of cyclic codes of length and length 2 (where is prime integer and is Euler phi function) over Hamilton Quaternion integers of Quaternion… More >

ZHENKUI CUI^1,#,*, GUIQIN SUN^2,#,*, QUANZHI ZHAO¹

BIOCELL, Vol.46, No.9, pp. 2133-2144, 2022, DOI:10.32604/biocell.2022.020512

Abstract Cotton is widely distributed worldwide, and improving the quality of its fiber is one of the most important tasks in cotton breeding. Cotton fibers are primarily composed of cellulose, which is synthesized by CesA complexes (CSCs). However, the functions of CesA genes in cotton fiber development have not been comprehensively analysed. In this study, the cotton transcriptome and metabolome were used to investigate the function of CesA genes in fiber development. Finally, 321 metabolites were obtained, 84 of which were associated with the corresponding genes. Interestingly, a target gene named Gh_A08G144300, one of the CesA gene family members, was closely… More >

Shiqin Yang^1,2,#, Tao Jiang^3,#, Peilin Shen¹, Shengjie Ren³, Zhun Gu¹, Fangjun Feng², Yunpeng Peng^2,4, Wei Wang⁵, Kai Xu^2,*

Phyton-International Journal of Experimental Botany, Vol.91, No.8, pp. 1671-1686, 2022, DOI:10.32604/phyton.2022.018996

Abstract Plant height is an important morphological trait that affects crop yield. Several genes related to plant height and yield have been reported in rice (Oryza sativa L.), however, the molecular mechanism underlying the regulation of these traits is still not completely understood. VP64 is widely used as a transcriptional activator to investigate the biological function of genes encoding transcription factors. Here, we identified a novel bZIP transcription factor OsbZIP62 that is involved in modulating agronomic traits in rice. Overexpression of OsbZIP62-VP64 (OsbZIP62V) significantly increases the plant height and yield per plant in rice. RNA-seq analysis showed that some plant height… More >

Xuechen Liu¹, Majid Khan², Zahid Rasheed³, Syed Masroor Anwar^4,*, Muhammad Arslan⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.2, pp. 1171-1195, 2022, DOI:10.32604/cmes.2022.019199

Abstract The EWMA charts are the well-known memory-type charts used for monitoring the small-to-intermediate shifts in the process parameters (location and/or dispersion). The hybrid EWMA (HEWMA) charts are enhanced version of the EWMA charts, which effectively monitor the process parameters. This paper aims to develop two new uppersided HEWMA charts for monitoring shifts in process variance, i.e., HEWMA1 and HEWMA2 charts. The design structures of the proposed HEWMA1 and HEWMA2 charts are based on the concept of integrating the features of two EWMA charts. The HEWMA1 and HEWMA2 charts plotting statistics are developed using one EWMA statistic as input for the… More >