Mingyue Miao^1,#, Fei Wang^1,#, Qing Li¹, Longchen Tao¹, Chenchen Dai¹, Yu Liu¹, Shujuan Han¹, Wenshuai Chen^1,*, Ping Lu^2,*

Journal of Renewable Materials, Vol.12, No.3, pp. 443-455, 2024, DOI:10.32604/jrm.2023.030412

Abstract The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials. High-crystalline, high-aspect ratio, and slender nanofibrillated cellulose (NFC) were extracted from four biomass resources. The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions. The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli. As the concentration increased, the storage and loss modulus of NFC dispersion increased. When the shear rate increased to a certain value, there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived… More > Graphic Abstract

Moumouni Sidibé^1,2,*, Augustin K. N. Aoudji¹, Yaya Issifou Moumouni^3,*, Issa Sacko⁴, Idelphonse Saliou¹, Bourema Koné², Achille Ephrem Assogbadjo⁵, Afio Zannou¹

Revue Internationale de Géomatique, Vol.33, pp. 51-76, 2024, DOI:10.32604/rig.2024.045505

Abstract La dynamique d’occupation des terres constitue un préalable pour l’identification des contraintes de gestion des ressources naturelles, l’évolution de pratiques agraires et la croissance démographique. L’objectif de cette recherche est d’améliorer les connaissances sur la dynamique d’occupation des terres agricoles dans les zones de cultures sèches (Cinzana) et cotonnière (Kléla) au Mali. La méthodologie utilisée a consisté à la collecte des données planimétriques et à l’analyse diachronique à travers des images satellitaires Landsat TM (Thematic Mapper) de 2000 et OLI (Operational Land Image) de 2020. Les taux de dégradation et de déforestation des formations naturelles ont été calculés d’une part… More > Graphic Abstract

Rebecca Y. M. Cheung^1,*, Iris Yili Wang², Elsa Ngar-Sze Lau³

International Journal of Mental Health Promotion, Vol.26, No.3, pp. 177-187, 2024, DOI:10.32604/ijmhp.2024.047190

Abstract Guided by the theoretical processes of mindfulness and psychological well-being, this study examined serenity as a mediator between mindfulness facets and psychological well-being, as indexed by depressive symptoms and life satisfaction. Participants were 133 mindfulness practitioners who took part in a 3-day transnational meditation event in Hong Kong. Upon informed consent, participants completed a self-report questionnaire. The findings from structural equation modeling showed that serenity mediated the relation between two facets of mindfulness, including describing and nonreacting to inner experience, and life satisfaction. Serenity also mediated the relation between the mindfulness facet of describing and depressive symptoms. Direct associations were… More >

Tao Liu¹, Huiyin Shi¹, Chen Chen^1,*, Rong Fu^2,*

International Journal of Mental Health Promotion, Vol.26, No.3, pp. 199-209, 2024, DOI:10.32604/ijmhp.2024.046303

Abstract To explore the relationship between social influence, social comparison, clarity of self-concept, and psychological anxiety among young women during their usage of social networking sites, our study selected 338 young women aged 14–34 from the social site platforms of Little Red Book and Weibo for questionnaire surveys. The Passive Social Network Utilization Scale, Social Comparison Scale (SCS), Social Influence Questionnaire, Self-Concept Clarity Scale (SCCS), and Generalized Anxiety Disorder Scale (GAD-7) were employed to measure the subjects. Our results show that the frequency of passive social media use is positively related to the level of psychological anxiety. Social comparison, social influence,… More >

Yi Li¹, Xinpeng Wang^2,*

International Journal of Mental Health Promotion, Vol.26, No.3, pp. 239-250, 2024, DOI:10.32604/ijmhp.2023.029611

Abstract The success of teachers in professional environments has a desirable influence on their mental condition. Simply said, teachers’ professional success plays a crucial role in improving their mental health. Due to the invaluable role of professional success in teachers’ mental health, personal and professional variables helping teachers succeed in their profession need to be uncovered. While the role of teachers’ personal qualities has been well researched, the function of professional variables has remained unknown. To address the existing gap, the current investigation measured the role of two professional variables, namely job satisfaction and loving pedagogy, in Chinese EFL teachers’ professional… More >

R. VENKATESAN^*, S. R. DARSON IMMANUEL JOHN, N. RAJESWARI

Journal of Polymer Materials, Vol.36, No.3, pp. 261-273, 2019, DOI:10.32381/JPM.2019.36.03.6

Abstract Nanocomposite films of chitosan (CH) incorporated with different wt. % of the polyoligomericsilsesquioxane (POSS) were prepared by solution casting. The thermal, mechanical, morphological and antimicrobial properties of the nanocomposites were examined. TGA analyses of the nanocomposites indicate that the filler enables the enhancement of thermal stability of chitosan. The tensile strength of the nanocomposite films is enhanced (10.9 MPa for neat chitosan to 24.0MPa for 5wt. % filled chitosan) by the addition of POSS while the elongation at break is reduced. The nanocomposite films exhibited excellent antimicrobial activity against both gram positive and gram negative bacteria. This activity increases with… More >

XIAOYAN LIU^a,*, XU CHEN^a, HONGXING ZHANG^b, CHANGJUN ZHANG^a, SHIYUAN YANG^a, GUANGQUAN LI^a

Journal of Polymer Materials, Vol.36, No.2, pp. 121-132, 2019, DOI:10.32381/JPM.2019.36.02.2

Abstract In this work, three in situ impact polypropylene copolymer(IPC) samples were prepared through Ziegler-Natta catalyst only changing the feed composition (ethylene to ethylene and propylene molar ratio, C2/C2+C3) in gas-phase polymerization reactor. Polymer (IPC) were characterical by solvent classification, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), successive self-nucleation and annealing (SSA), nuclear magnetic resonance(13C-NMR) and scanning electron microscopy(SEM). The mechanical properties of IPC samples were tested.The results indicate that with similar ethylene content, the feed composition which determines the content and structure of EPR and EbP component in IPC, further impacts the rubber phase size and distribution in IPC,… More >

GOBI NALLATHAMBI, BHARGAVI RAM THIMMIAH^*

Journal of Polymer Materials, Vol.37, No.3-4, pp. 189-200, 2020, DOI:10.32381/JPM.2020.37.3-4.6

Abstract The aim of this study is to optimize the process parameters of alkali treated Saharan aloe vera cactus fibres using of Box-behnken experimental design. The Saharan aloe vera cactus fibres were treated with different concentration of NaOH, soaking time and temperature which affect the properties of fibres and plays main role in removal of lignin, hemicellulose, pectin and wax content. The chemical composition of untreated and treated fibres was analyzed by standard methods. XRD result shows the improvement in the crystallinity index of fibres due to alkali treatment. ATR-FTIR analysis shows that hemicellulose and lignin were decreased in all alkali… More >

R.M. MISHRAA, R. VIJAYVARGIYAA, K.N. PANDEYA, J.S.P. RAIB

Journal of Polymer Materials, Vol.37, No.3-4, pp. 179-188, 2020, DOI:10.32381/JPM.2020.37.3-4.5

Abstract The present investigation is targeted to prepare nanocomposites based on binary blends of polyetherimide (PEI)-silicone rubber incorporated with varied loadings of nanotitanium dioxide particles. Nanocomposites have been prepared by melt blending process using twin screw extruder. Thermal properties of the developed nanocomposites have been investigated with the help of thermogravimetric analyzer (TGA) and dynamic mechanical analyzer (DMA). Scanning electron microscopy (SEM) is used to analyze the morphological properties of the nanocomposites. Mechanical properties (tensile strength, tensile modulus, elongation at break, impact strength) of the nanocomposites have been evaluated by universal testing machine (UTM). Mechanical testing results reveal that there is… More >

İBRAHIM KARTERI^a,b,*, MUSTAFA ÖZYEŞILDAĞ^b

Journal of Polymer Materials, Vol.38, No.1-2, pp. 167-177, 2021, DOI:10.32381/JPM.2021.38.1-2.13

Abstract This study aims to provide a comprehensive account of chemically reduced graphene oxide (RGO) and decabromodiphenyl ethane (DBDPE) filled acrylonitrile-butadiene-styrene (ABS) multifunctional filaments for fused deposition modeling (FDM) applications. ABS/RGO with DBDPE nanocomposites (ABS-GDM) were fabricated by single-screw extrusion at a diameter of 1.75 mm. The proportion of RGO and DBDPE for the ABS-GDM filaments was set to 0.75 wt%. The properties of the ABS-GDM were determined using optical, mechanical, thermal, and morphological characteristics (using scanning electron microscopy). A three-dimensional (3D) model was successfully printed using the developed ABS-GDM filaments for FDM 3D printing. These ABS-GDM have the potential to… More >