Mohamed Abdelsabour Fahmy^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.1, pp. 175-199, 2021, DOI:10.32604/cmes.2021.012218

Abstract The main aim of this paper is to propose a new memory dependent derivative (MDD) theory which called threetemperature nonlinear generalized anisotropic micropolar-thermoelasticity. The system of governing equations of the problems associated with the proposed theory is extremely difficult or impossible to solve analytically due to nonlinearity, MDD diffusion, multi-variable nature, multi-stage processing and anisotropic properties of the considered material. Therefore, we propose a novel boundary element method (BEM) formulation for modeling and simulation of such system. The computational performance of the proposed technique has been investigated. The numerical results illustrate the effects of time delays and kernel functions on… More >

Xueling Nie^1,∗, Xinlu Zou¹, Dishi Zhu²

Computer Systems Science and Engineering, Vol.34, No.4, pp. 207-214, 2019, DOI:10.32604/csse.2019.34.207

Abstract There are disadvantages such as lack of resources and experience in college students’ entrepreneurship and the current research belong to the investigation and research, lacking the prediction simulation model research. Based on the theory of individual learning and the theory of complex systems, this study analyzes the mechanism of college students’ entrepreneurial process through dynamic learning theory, establishes the model of college students’ entrepreneurial subject, studies the different learning styles of college students, and discusses the influence of environmental dynamics on college students’ chance recognition. Through simulation and practice analysis, it is concluded that college students’ entrepreneurship is the process… More >

Xiaodan Ren^1,*, Tiancan Huang²

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.2, pp. 411-413, 2020, DOI:10.32604/cmes.2020.012603

Abstract This article has no abstract. More >

Jingfa Li¹, Liang Gong², Yongtu Liang³, Zhiguo Qu⁴, Bo Yu^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.1, pp. 1-4, 2020, DOI:10.32604/cmes.2020.011924

Abstract This article has no abstract. More >

Xiang Liu¹, Liangbo Sun², Mingzhen Wang^{3, 4}, Bin Li², Lisheng Liu^{1, 5, *}

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.1, pp. 153-183, 2020, DOI:10.32604/cmes.2020.08716

Abstract A vein model was established to simulate the periodic characteristics of blood flow and valve deformation in blood-induced valve cycles. Using an immersed finite element method which was modified by a ghost fluid technique, the interaction between the vein and blood was simulated. With an independent solid solver, the contact force between vein tissues was calculated using an adhesive contact method. A benchmark simulation of the normal valve cycle validated the proposed model for a healthy vein. Both the opening orifice and blood flow rate agreed with those in the physiology. Low blood shear stress and maximum leaflet stress were… More >

Ying Song^1,2, Jiale Yan^1,2, Shaofan Li^2,*, Zhuang Kang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 465-492, 2019, DOI:10.32604/cmes.2019.07190

Abstract In the present work, a state-based peridynamics with adaptive particle refinement is proposed to simulate water ice crater formation due to impact loads. A modified Drucker-Prager constitutive model was adopted to model ice and was implemented in the state-based peridynamic equations to analyze the elastic-plastic deformation of ice. In simulations, we use the fracture toughness failure criterion in peridynamics to simulate the quasi-brittle failure of ice. An adaptive particle refinement method in peridynamics was proposed to improve computational efficiency. The results obtained using the peridynamic model were compared with the experiments in previous literatures. It was found that the peridynamic… More >

Yongwei Wang¹, Fei Han^2,*, Gilles Lubineau^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 399-423, 2019, DOI:10.32604/cmes.2019.07192

Abstract Classical continuum mechanics which leads to a local continuum model, encounters challenges when the discontinuity appears, while peridynamics that falls into the category of nonlocal continuum mechanics suffers from a high computational cost. A hybrid model coupling classical continuum mechanics with peridynamics can avoid both disadvantages. This paper describes the hybrid model and its adaptive coupling approach which dynamically updates the coupling domains according to crack propagations for brittle materials. Then this hybrid local/nonlocal continuum model is applied to fracture simulation. Some numerical examples like a plate with a hole, Brazilian disk, notched plate and beam, are performed for verification… More >

F. Caputo, G. Lamanna, A. Soprano¹

Structural Durability & Health Monitoring, Vol.7, No.4, pp. 283-296, 2011, DOI:10.3970/sdhm.2011.007.283

Abstract The present paper deals with a numerical investigation on hybrid bolted joints between unidirectional, quasi isotropic Carbon Fiber Reinforced Polymer (CFRP) composite and aluminium alloy plates, subjected to traction loads. CFRP composite materials are widely used in aerospace applications, where requirements of weight reduction and structural high performances are very compelling. Composite materials generally present high resistance to fatigue and corrosion but the presence of joints in the structure can cause structural problems and then decrease the structural reliability of jointed component.
A hybrid bolted joint constituted of a metal plate, made of aluminium alloy, and a carbon fiber reinforced… More >

Yoshitaka Shimada^∗,†, Taiji Adachi^∗,†,‡, Yasuhiro Inoue^∗,†, Masaki Hojo^∗

Molecular & Cellular Biomechanics, Vol.6, No.3, pp. 161-174, 2009, DOI:10.3970/mcb.2009.006.161

Abstract The actin filament, which is the most abundant component of the cytoskeleton, plays important roles in fundamental cellular activities such as shape determination, cell motility, and mechanosensing. In each activity, the actin filament dynamically changes its structure by polymerization, depolymerization, and severing. These phenomena occur on the scales ranging from the dynamics of actin molecules to filament structural changes with its deformation due to the various forces, for example, by the membrane and solvent. To better understand the actin filament dynamics, it is important to focus on these scales and develop its mathematical model. Thus, the objectives of this study… More >

Liang Wu¹, Xiaorui Xiang¹, Yang Chen¹, Karrech Ali^2,*, Junru Zhou^1,*, Ming Chen³

CMES-Computer Modeling in Engineering & Sciences, Vol.120, No.2, pp. 421-443, 2019, DOI:10.32604/cmes.2019.05218

Abstract During the excavation of deep rock, a sudden change in boundary conditions will cause the in-situ stress on the excavation surface to release instantaneously. This disturbance propagates in the form of an unloading stress wave, which will enlarge the damage field of surrounding rock. In this paper, the dynamic unloading problem of the in-situ stress in deep rock excavation is studied using theoretical, numerical, and experimental methods. First, the dynamic unloading process of rock is analyzed through adopting the wave equation, and the equivalent viscous damping coefficient of the material is taken into consideration. Calculations show that there is significant… More >