Seyed Mahmoud Hosseini ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.95, No.1, pp. 1-29, 2013, DOI:10.3970/cmes.2013.095.001

Abstract In this article, the effects of carbon nanotubes distributions on natural frequency are studied for a functionally graded nanocomposite thick hollow cylinder reinforced by single-walled carbon nanotubes using a hybrid mesh-free method. The FG nanocomposite cylinder is excited by a shock loading, which is applied on the inner surface of cylinder. The first natural frequency is obtained for various nonlinear grading patterns of distributions of the aligned carbon nanotubes. The effects of various nonlinear grading patterns on natural frequency are obtained and discussed in details. The presented hybrid mesh-free method is based on the generalized finite difference (GFD) method for… More >

J. A. Nairn¹

CMES-Computer Modeling in Engineering & Sciences, Vol.92, No.3, pp. 271-299, 2013, DOI:10.32604/cmes.2013.092.271

Abstract The “multimaterial” version of the material point method (MPM) extrapolates each material to its own velocity field on a background grid. By reconciling momenta on nodes interacting with two or more materials, MPM is able to automatically handle contact without any need for special contact elements. This paper extends multimaterial MPM to automatically handle imperfect interfaces between materials as well. The approach is to evaluate displacement discontinuity on multimaterial nodes and then add internal forces and interfacial energy determined by an imperfect interface traction law. The concept is simple, but implementation required numerous corrections to make the analysis mesh independent,… More >

R. Khanna^1,2, D. R. Katti¹, K. S. Katti¹

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.6, pp. 530-556, 2012, DOI:10.3970/cmes.2012.087.530

Abstract Here we report a new in situ nanoindentation technique developed to evaluate the composite mechanical behavior of cell-biomaterial construct under physiological conditions over the time scale of bone nodule generation. Using this technique, mechanical behavior of osteoblast cell-substrate interfaces on tissue engineered materials (chitosan-polygalacturonic acid-nanohydroxyapatite (CPH) films) is investigated. Mechanical behavior of cells in the elastic regime over the time scale of cell adhesion (1 day), proliferation (4 days), development (8 days) and maturation (22 days) of bone nodules is evaluated. Our results indicate that the elastic properties of flat cells are higher (indicating stiffer response, after 4 days, as… More >

A. N. Guz, V. A. Dekret¹

CMES-Computer Modeling in Engineering & Sciences, Vol.13, No.3, pp. 165-170, 2006, DOI:10.3970/cmes.2006.013.165

Abstract Stability problem of composite material reinforced by two parallel short fibers is solved. The problem is formulated with application of equations of linearized three-dimensional theory of stability. The composite is modeled as piecewise-homogeneous medium. The influence of geometrical and mechanical parameters of the material on critical strain is investigated. More >

G.I. Giannopoulos¹, S.K. Georgantzinos², D.E. Katsareas², N.K. Anifantis²

CMES-Computer Modeling in Engineering & Sciences, Vol.56, No.3, pp. 231-248, 2010, DOI:10.3970/cmes.2010.056.231

Abstract A hybrid finite element formulation, combining nanoscopic and macroscopic considerations is proposed, for the prediction of the elastic mechanical properties of single walled carbon nanotube (SWCNT)-based composites. The nanotubes are modeled according to the molecular mechanics theory via the use of spring elements, while the matrix is modeled as a continuum medium. A new formulation concerning the load transfer between the nanotubes and matrix is proposed. The interactions between the two phases are implemented by utilizing appropriate stiffness variations describing a heterogeneous interfacial region. A periodic distribution and orientation of the SWCNTs is considered. Thereupon, the nanocomposite is modeled using… More >

A.N. Guz, V.A. Dekret¹

CMES-Computer Modeling in Engineering & Sciences, Vol.49, No.1, pp. 69-80, 2009, DOI:10.3970/cmes.2009.049.069

Abstract The two models in the three-dimensional theory of stability of the nanotube reinforced composite materials are discussed. The model of "infinite fibers" and the model of "short fibers" are considered. The primary objective is attended to "short fibers" model. All results are obtained in the framework of the three-dimensional linearized theory of stability of deformable bodies. More >

A.N.Guz¹, V.A.Dekret¹

CMES-Computer Modeling in Engineering & Sciences, Vol.42, No.3, pp. 177-186, 2009, DOI:10.3970/cmes.2009.042.177

Abstract Stability problem of composite material reinforced by periodical rows of short fibers is solved. The problem is formulated with application of equations of linearized three-dimensional theory of stability. The composite is modeled as piecewise-homogeneous medium. The influence of geometrical and mechanical parameters of the composite to the critical strain is investigated. More >

Weixue Tian¹, Ronggui Yang²

CMES-Computer Modeling in Engineering & Sciences, Vol.24, No.2&3, pp. 123-142, 2008, DOI:10.3970/cmes.2008.024.123

Abstract In this paper, we investigated the effective thermal conductivity of three dimensional nanocomposites composed of randomly distributed binary nanoparticles with large differences (contrast ratio) in their intrinsic (bulk) thermal conductivity. When random composites are made from particles with very different thermal conductivity (large contrast ratio), a continuous phase of high thermal conductivity constituent is formed when its volumetric concentration reaches beyond the percolation threshold. Such a continuous phase of material can provide a potentially low resistance pathway for thermal transport in random composites. The percolation theory predicts the thermal conductivity of the random composites to increase according to a scaling… More >

K. S. Alan¹

CMC-Computers, Materials & Continua, Vol.44, No.1, pp. 1-21, 2014, DOI:10.3970/cmc.2014.044.001

Abstract In the framework of the piecewise homogeneous body model with the use of the three-dimensional geometrically nonlinear exact equations of the theory of elasticity, the method developed for the determination of the stress distribution in the nanocomposites with unidirectional locally curved and hollow nanofibers is used to investigate the normal stresses acting along the nanofibers. Furthermore, it is assumed that the body is loaded at infinity by uniformly distributed normal forces which act along the nanofibers and the crosssection of the nanofibers and normal to its axial line, is a circle of constant radius along the entire nanofiber length. For… More >

Xue-Qian Fang^1,2, Ming-Juan Huang¹, Jun-Ying Wu³, Guo-Quan Nie¹, Jin-Xi Liu¹

CMC-Computers, Materials & Continua, Vol.33, No.2, pp. 199-211, 2013, DOI:10.3970/cmc.2013.033.199

Abstract In nanocomposites, coated nano-fibers are often used to obtain good performance, and the high interface-to-volume ratio shows great effect on the macroscopic effective properties of nanocomposites. In this study, the effect of interface energy around the unidirectional coated nanofibers on the effective dynamic effective properties is explicitly addressed by effective medium method and wave function expansion method. The multiple scattering resulting from the series coating nano-fibers is reduced to the problem of one typical nano-fiber in the effective medium. The dynamic effective shear modulus is obtained on the basis of the derived imperfect interface conditions. Analyses show that the effect… More >