Adel Hamdan Mohammad^*

Intelligent Automation & Soft Computing, Vol.30, No.1, pp. 65-80, 2021, DOI:10.32604/iasc.2021.016140

Abstract Intrusion detection is an important topic that aims at protecting computer systems. Besides, feature selection is crucial for increasing the performance of intrusion detection. This paper employs a new hybrid feature selection model for intrusion detection. The implemented model uses Grey Wolf Optimization (GWO) and Particle Swarm Optimization (PSO) algorithms in a new manner. In addition, this study introduces two new models called (PSO-GWO-NB) and (PSO-GWO-ANN) for feature selection and intrusion detection. PSO and GWO show emergent results in feature selection for several purposes and applications. This paper uses PSO and GWO to select features for the intrusion detection system.… More >

Raja Jarray¹, Mujahed Al-Dhaifallah^2,*, Hegazy Rezk^3,4, Soufiene Bouallègue^1,5

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2159-2180, 2021, DOI:10.32604/cmc.2021.018752

Abstract Paths planning of Unmanned Aerial Vehicles (UAVs) in a dynamic environment is considered a challenging task in autonomous flight control design. In this work, an efficient method based on a Multi-Objective Multi-Verse Optimization (MOMVO) algorithm is proposed and successfully applied to solve the path planning problem of quadrotors with moving obstacles. Such a path planning task is formulated as a multicriteria optimization problem under operational constraints. The proposed MOMVO-based planning approach aims to lead the drone to traverse the shortest path from the starting point and the target without collision with moving obstacles. The vehicle moves to the next position… More >

A. M. Abdullah¹, Hegazy Rezk^2,3,*, Abdelrahman Elbloye¹, Mohamed K. Hassan^1,4, A. F. Mohamed^1,5

Intelligent Automation & Soft Computing, Vol.29, No.3, pp. 729-740, 2021, DOI:10.32604/iasc.2021.018595

Abstract The energy harvested from a thermoelectric generator (TEG) relies mostly on the difference in temperature between the hot side and cold side of the TEG along with the connected load. Hence, a reliable maximum power point tracker is needed to force the TEG to operate close to the maximum power point (MPP) with any variation during the operation. In the current work, an optimized fractional maximum power point tracker (OFMPPT) is proposed to improve the performance of the TEG. The proposed tracker is based on fractional control. The optimal parameters of the OFMPPT have been determined using the grey wolf… More >

Yu Xue^1,2,*, Yiling Tong¹, Ziming Yuan¹, Shoubao Su², Adam Slowik³, Sam Toglaw⁴

Intelligent Automation & Soft Computing, Vol.29, No.2, pp. 497-509, 2021, DOI:10.32604/iasc.2021.016884

Abstract Because of the characteristics of high redundancy, high parallelism and nonlinearity in the handwritten character recognition model, the convolutional neural networks (CNNs) are becoming the first choice to solve these complex problems. The complexity, the types of characters, the character similarity of the handwritten character dataset, and the choice of optimizers all have a great impact on the network model, resulting in low accuracy, high loss, and other problems. In view of the existence of these problems, an improved LeNet-5 model is proposed. Through increasing its convolutional layers and fully connected layers, higher quality features can be extracted. Secondly, a… More >

Salah K. Elsayed^1,*, Ahmed M. Agwa^2,3, Mahmoud A. El-Dabbah², Ehab E. Elattar¹

Intelligent Automation & Soft Computing, Vol.28, No.3, pp. 639-651, 2021, DOI:10.32604/iasc.2021.016464

Abstract The problem of parameters identification for transformer equivalent circuit can be solved by optimizing a nonlinear formula. The objective function attempts to minimize the sum of squared relative errors amongst the accompanying calculated and actual points of currents, powers, and secondary voltage during the load test of the transformer subject to a set of parameters constraints. The authors of this paper propose applying a new and efficient stochastic optimizer called the slime mold optimization algorithm (SMOA) to identify parameters of the transformer equivalent circuit. The experimental measurements of load test of single- and three-phase transformers are entered to MATLAB code… More >

Rabii Fessi¹, Hegazy Rezk^2,3,*, Soufiene Bouallègue^1,4

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2265-2282, 2021, DOI:10.32604/cmc.2021.017237

Abstract The research on Unmanned Aerial Vehicles (UAV) has intensified considerably thanks to the recent growth in the fields of advanced automatic control, artificial intelligence, and miniaturization. In this paper, a Grey Wolf Optimization (GWO) algorithm is proposed and successfully applied to tune all effective parameters of Fast Terminal Sliding Mode (FTSM) controllers for a quadrotor UAV. A full control scheme is first established to deal with the coupled and underactuated dynamics of the drone. Controllers for altitude, attitude, and position dynamics become separately designed and tuned. To work around the repetitive and time-consuming trial-error-based procedures, all FTSM controllers’ parameters for… More >

Adil Mushtaq¹, Muhammad Nadeem Majeed¹, Farhan Aadil², Muhammad Fahad Khan², Sangsoon Lim^3,*

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 3795-3814, 2021, DOI:10.32604/cmc.2021.015369

Abstract Body Area Networks (BODYNETs) or Wireless Body Area Networks (WBAN), being an important type of ad-hoc network, plays a vital role in multimedia, safety, and traffic management applications. In BODYNETs, rapid topology changes occur due to high node mobility, which affects the scalability of the network. Node clustering is one mechanism among many others, which is used to overcome this issue in BODYNETs. There are many clustering algorithms used in this domain to overcome this issue. However, these algorithms generate a large number of Cluster Heads (CHs), which results in scarce resource utilization and degraded performance. In this research, an… More >

Hegazy Rezk^1,*, Mohamed A. Mohamed², Ahmed A. Zaki Diab², N. Kanagaraj¹

Computer Systems Science and Engineering, Vol.37, No.2, pp. 219-231, 2021, DOI:10.32604/csse.2021.015543

Abstract A reliable approach based on a multi-verse optimization algorithm (MVO) for designing load frequency control incorporated in multi-interconnected power system comprising wind power and photovoltaic (PV) plants is presented in this paper. It has been applied for optimizing the control parameters of the load frequency controller (LFC) of the multi-source power system (MSPS). The MSPS includes thermal, gas, and hydro power plants for energy generation. Moreover, the MSPS is integrated with renewable energy sources (RES). The MVO algorithm is applied to acquire the ideal parameters of the controller for controlling a single area and a multi-area MSPS integrated with RES.… More >

M. Premkumar¹, R. Sowmya², Pradeep Jangir³, Kottakkaran Sooppy Nisar^4,*, Mujahed Aldhaifallah⁵

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2227-2242, 2021, DOI:10.32604/cmc.2021.015565

Abstract The Equilibrium Optimizer (EO), Grey Wolf Optimizer (GWO), and Whale Optimizer (WO) algorithms are being recently developed for engineering optimization problems. In this paper, the EO, GWO, and WO algorithms are applied individually for a brushless direct current (BLDC) design optimization problem. The EO algorithm is inspired by the models utilized to find the system’s dynamic state and equilibrium state. The GWO and WO algorithms are inspired by the hunting behavior of the wolf and the whale, respectively. The primary purpose of any optimization technique is to find the optimal configuration by maximizing motor efficiency and/or minimizing the total mass.… More >

Hegazy Rezk^1,2,*, Ahmed Fathy^3,4, Mokhtar Aly^5,6, Mohamed N. Ibrahim^7,8,9

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2271-2281, 2021, DOI:10.32604/cmc.2021.014590

Abstract Hydrocarbons, carbon monoxide and other pollutants from the transportation sector harm human health in many ways. Fuel cell (FC) has been evolving rapidly over the past two decades due to its efficient mechanism to transform the chemical energy in hydrogen-rich compounds into electrical energy. The main drawback of the standalone FC is its slow dynamic response and its inability to supply rapid variations in the load demand. Therefore, adding energy storage systems is necessary. However, to manage and distribute the power-sharing among the hybrid proton exchange membrane (PEM) fuel cell (FC), battery storage (BS), and supercapacitor (SC), an energy management… More >