Richu Mary Thomas, Malarvizhi Subramani^*

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1275-1291, 2022, DOI:10.32604/cmc.2022.024507

Abstract The recent aggrandizement of radio frequency (RF) signals in wireless power transmission combined with energy harvesting methods have led to the replacement of traditional battery-powered wireless networks since the blooming RF technology provides energy renewal of wireless devices with the quality of service (QoS). In addition, it does not require any unnecessary alterations on the transmission hardware side. A hybridized global optimization technique uniting Global best and Local best (GL) based particle swarm optimization (PSO) and ant colony optimization (ACO) is proposed in this paper to optimally allocate resources in wireless powered communication networks (WPCN) through coordinated operation of communication… More >

M. Iniyan Arasu^1,*, S. Subha Rani¹, G. Raswin Geoffery²

Intelligent Automation & Soft Computing, Vol.33, No.2, pp. 729-742, 2022, DOI:10.32604/iasc.2022.021973

Abstract LoRa is well-known for its extensive communication range, inexpensive efficiency, and reduced or less power consumption in end devices. End-device energy consumption in LoRa networks is ludicrous because some end-devices use massive dissemination variables to reach the remote doorway. Furthermore, the batteries in these end devices deplete very quickly, reducing network life significantly. To address this issue, an optimal mixed-integer linear programming long-range technique (OMILP-LoRa) was used in this study. The primary goal of this research is to enable adaptive resource allocation using the unique OMILP-LoRa protocol. The ACCURATE heuristic and the OMILP model for LoRaWAN resource allocation are presented… More >

Suzhen Wang^1,*, Wenli Wang¹, Zhiting Jia¹, Chaoyi Pang²

Computer Systems Science and Engineering, Vol.42, No.3, pp. 1241-1255, 2022, DOI:10.32604/csse.2022.024021

Abstract With the rapid development and popularization of 5G and the Internet of Things, a number of new applications have emerged, such as driverless cars. Most of these applications are time-delay sensitive, and some deficiencies were found during data processing through the cloud centric architecture. The data generated by terminals at the edge of the network is an urgent problem to be solved at present. In 5 g environments, edge computing can better meet the needs of low delay and wide connection applications, and support the fast request of terminal users. However, edge computing only has the edge layer computing advantage, and… More >

M. Manikandan^1,*, R. Subramanian², M. S. Kavitha³, S. Karthik³

Computer Systems Science and Engineering, Vol.42, No.3, pp. 935-948, 2022, DOI:10.32604/csse.2022.021816

Abstract In today’s world, Cloud Computing (CC) enables the users to access computing resources and services over cloud without any need to own the infrastructure. Cloud Computing is a concept in which a network of devices, located in remote locations, is integrated to perform operations like data collection, processing, data profiling and data storage. In this context, resource allocation and task scheduling are important processes which must be managed based on the requirements of a user. In order to allocate the resources effectively, hybrid cloud is employed since it is a capable solution to process large-scale consumer applications in a pay-by-use… More >

Salman Khan^1,*, Ibrar Ali Shah¹, Nasser Tairan², Habib Shah², Muhammad Faisal Nadeem³

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 6147-6163, 2022, DOI:10.32604/cmc.2022.023234

Abstract In recent years, the significant growth in the Internet of Things (IoT) technology has brought a lot of attention to information and communication industry. Various IoT paradigms like the Internet of Vehicle Things (IoVT) and the Internet of Health Things (IoHT) create massive volumes of data every day which consume a lot of bandwidth and storage. However, to process such large volumes of data, the existing cloud computing platforms offer limited resources due to their distance from IoT devices. Consequently, cloud-computing systems produce intolerable latency problems for latency-sensitive real-time applications. Therefore, a new paradigm called fog computing makes use of… More >

Sami Ullah Khan¹, Babar Nazir¹, Muhammad Hanif^2,*, Akhtar Ali³, Sardar Alam¹, Usman Habib⁴

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 4199-4220, 2022, DOI:10.32604/cmc.2022.020852

Abstract The cloud service level agreement (SLA) manage the relationship between service providers and consumers in cloud computing. SLA is an integral and critical part of modern era IT vendors and communication contracts. Due to low cost and flexibility more and more consumers delegate their tasks to cloud providers, the SLA emerges as a key aspect between the consumers and providers. Continuous monitoring of Quality of Service (QoS) attributes is required to implement SLAs because of the complex nature of cloud communication. Many other factors, such as user reliability, satisfaction, and penalty on violations are also taken into account. Currently, there… More >

J. V. Anand¹, R. Praveena^2,*, T. R. Ganesh Babu²

Journal on Internet of Things, Vol.3, No.4, pp. 139-147, 2021, DOI:10.32604/jiot.2021.016747

Abstract The underwater wireless communication with the complexity of attenuation and low propagation speed makes resource constraints in networking sensor nodes and sink. Underwater Sensor Transmission with Attenuation Calculation using Non Orthogonal Multiple Access (UWSTAC-NOMA) protocol has been proposed. This protocol calculates channel gain along with attenuation in underwater channels and provides internetworking sensor for rate allocation minimizing interference. Successive Interference Cancellation has been used at the receiving sensor to decode the information sent. The network level performance of sensors and increasing the data rate improves the overall throughput. Simultaneously, connecting several sensors to sink based on its depth region of… More >

S. Vimalnath^1,*, G. Ravi²

Intelligent Automation & Soft Computing, Vol.32, No.3, pp. 1687-1699, 2022, DOI:10.32604/iasc.2022.023083

Abstract With recent advancements in machine-to-machine (M2M), the demand for fastest communication is an utmost concern of the M2M technology. The advent of 5G telecommunication networks enables to bridge the demand on satisfying the Quality-of-Service (QoS) concerns in M2M communication. The massive number of devices in M2M communication is henceforth do not lie under limited resource allocation by embedding the 5G telecommunication network. In this paper, we address the above limitation of allocation the resource to prominent M2M devices using Adaptive Neuro Fuzzy Inference System (ANFIS). In ANFIS, the adoption of rules will imply the resource allocation with the devices of… More >

Liang Dai¹, AoSong He¹, Guang Sun^1,3, Yuxing Pan^2,*

Intelligent Automation & Soft Computing, Vol.32, No.3, pp. 1831-1842, 2022, DOI:10.32604/iasc.2022.022438

Abstract In order to unify the management and scheduling of cloud resources, cloud platforms use virtualization technology to re-integrate multiple computing resources in the cloud and build virtual units on physical machines to achieve dynamic provisioning of resources by configuring virtual units of various sizes. Therefore, how to reasonably determine the mapping relationship between virtual units and physical machines is an important research topic for cloud resource scheduling. In this paper, we propose a fair cloud virtual machine resource allocation method of using the stable matching theory. Our allocation method considers the allocation of resources from both user’s demand and cloud… More >

R. Joshua Samuel Raj¹, M. Varalatchoumy², V. L. Helen Josephine³, A. Jegatheesan⁴, Seifedine Kadry⁵, Maytham N. Meqdad⁶, Yunyoung Nam^7,*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1095-1109, 2022, DOI:10.32604/cmc.2022.021859

Abstract Internet of Things (IoT) is transforming the technical setting of conventional systems and finds applicability in smart cities, smart healthcare, smart industry, etc. In addition, the application areas relating to the IoT enabled models are resource-limited and necessitate crisp responses, low latencies, and high bandwidth, which are beyond their abilities. Cloud computing (CC) is treated as a resource-rich solution to the above mentioned challenges. But the intrinsic high latency of CC makes it nonviable. The longer latency degrades the outcome of IoT based smart systems. CC is an emergent dispersed, inexpensive computing pattern with massive assembly of heterogeneous autonomous systems.… More >