Eungyu Lee, Yongsoo Lee, Taejin Lee^*

Computer Systems Science and Engineering, Vol.47, No.2, pp. 1919-1935, 2023, DOI:10.32604/csse.2023.039599

Abstract Artificial Intelligence (AI) technology has been extensively researched in various fields, including the field of malware detection. AI models must be trustworthy to introduce AI systems into critical decision-making and resource protection roles. The problem of robustness to adversarial attacks is a significant barrier to trustworthy AI. Although various adversarial attack and defense methods are actively being studied, there is a lack of research on robustness evaluation metrics that serve as standards for determining whether AI models are safe and reliable against adversarial attacks. An AI model’s robustness level cannot be evaluated by traditional evaluation indicators such as accuracy and… More >

Jingtong Peng^*

Computer Systems Science and Engineering, Vol.47, No.2, pp. 2275-2291, 2023, DOI:10.32604/csse.2023.039272

Abstract When applied to Unmanned Aerial Vehicles (UAVs), existing Simultaneous Localization and Mapping (SLAM) algorithms are constrained by several factors, notably the interference of dynamic outdoor objects, the limited computing performance of UAVs, and the holes caused by dynamic objects removal in the map. We proposed a new SLAM system for UAVs in dynamic environments to solve these problems based on ORB-SLAM2. We have improved the Pyramid Scene Parsing Network (PSPNet) using Depthwise Separable Convolution to reduce the model parameters. We also incorporated an auxiliary loss function to supervise the hidden layer to enhance accuracy. Then we used the improved PSPNet… More >

Esraa Hassan¹, Fatma M. Talaat¹, Samah Adel², Samir Abdelrazek³, Ahsan Aziz⁴, Yunyoung Nam^4,*, Nora El-Rashidy¹

Computer Systems Science and Engineering, Vol.47, No.2, pp. 1507-1525, 2023, DOI:10.32604/csse.2023.037493

Abstract Black fungus is a rare and dangerous mycology that usually affects the brain and lungs and could be life-threatening in diabetic cases. Recently, some COVID-19 survivors, especially those with co-morbid diseases, have been susceptible to black fungus. Therefore, recovered COVID-19 patients should seek medical support when they notice mucormycosis symptoms. This paper proposes a novel ensemble deep-learning model that includes three pre-trained models: reset (50), VGG (19), and Inception. Our approach is medically intuitive and efficient compared to the traditional deep learning models. An image dataset was aggregated from various resources and divided into two classes: a black fungus class… More >

Abdul Qadir¹, Rabbia Mahum¹, Suliman Aladhadh^2,*

Computer Systems Science and Engineering, Vol.47, No.2, pp. 1365-1384, 2023, DOI:10.32604/csse.2023.037033

Abstract A considerable portion of the population now experiences osteoarthritis of the knee, spine, and hip due to lifestyle changes. Therefore, early treatment, recognition and prevention are essential to reduce damage; nevertheless, this time-consuming activity necessitates a variety of tests and in-depth analysis by physicians. To overcome the existing challenges in the early detection of Knee Osteoarthritis (KOA), an effective automated technique, prompt recognition, and correct categorization are required. This work suggests a method based on an improved deep learning algorithm that makes use of data from the knee images after segmentation to detect KOA and its severity using the Kellgren-Lawrence… More >

Khalid M. O. Nahar¹, Ammar Almomani^2,3,*, Nahlah Shatnawi¹, Mohammad Alauthman⁴

Intelligent Automation & Soft Computing, Vol.37, No.2, pp. 2037-2057, 2023, DOI:10.32604/iasc.2023.038235

Abstract This study presents a novel and innovative approach to automatically translating Arabic Sign Language (ATSL) into spoken Arabic. The proposed solution utilizes a deep learning-based classification approach and the transfer learning technique to retrain 12 image recognition models. The image-based translation method maps sign language gestures to corresponding letters or words using distance measures and classification as a machine learning technique. The results show that the proposed model is more accurate and faster than traditional image-based models in classifying Arabic-language signs, with a translation accuracy of 93.7%. This research makes a significant contribution to the field of ATSL. It offers… More >

Amjed Al Fahoum^1,*, Tahani A. Ghobon²

Journal of New Media, Vol.5, No.1, pp. 1-22, 2023, DOI:10.32604/jnm.2023.037583

Abstract A groundbreaking method is introduced to leverage machine learning algorithms to revolutionize the prediction of success rates for science fiction films. In the captivating world of the film industry, extensive research and accurate forecasting are vital to anticipating a movie’s triumph prior to its debut. Our study aims to harness the power of available data to estimate a film’s early success rate. With the vast resources offered by the internet, we can access a plethora of movie-related information, including actors, directors, critic reviews, user reviews, ratings, writers, budgets, genres, Facebook likes, YouTube views for movie trailers, and Twitter followers. The… More >

Ming Li^1,*, Cairen Furifu¹, Chengyang Ge², Yunping Zheng¹, Shunfu Lin², Ronghui Liu²

Energy Engineering, Vol.120, No.8, pp. 1775-1801, 2023, DOI:10.32604/ee.2023.027215

Abstract As an effective carrier of integrated clean energy, the microgrid has attracted wide attention. The randomness of renewable energies such as wind and solar power output brings a significant cost and impact on the economics and reliability of microgrids. This paper proposes an optimization scheme based on the distributionally robust optimization (DRO) model for a microgrid considering solar-wind correlation. Firstly, scenarios of wind and solar power output scenarios are generated based on non-parametric kernel density estimation and the Frank-Copula function; then the generated scenario results are reduced by K-means clustering; finally, the probability confidence interval of scenario distribution is constrained… More >

Meng Yang¹, Jingbing Li^1,2,*, Uzair Aslam Bhatti^1,2, Chunyan Shao¹, Yen-Wei Chen³

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 5539-5554, 2023, DOI:10.32604/cmc.2023.036904

Abstract With the development of digitalization in healthcare, more and more information is delivered and stored in digital form, facilitating people’s lives significantly. In the meanwhile, privacy leakage and security issues come along with it. Zero watermarking can solve this problem well. To protect the security of medical information and improve the algorithm’s robustness, this paper proposes a robust watermarking algorithm for medical images based on Non-Subsampled Shearlet Transform (NSST) and Schur decomposition. Firstly, the low-frequency subband image of the original medical image is obtained by NSST and chunked. Secondly, the Schur decomposition of low-frequency blocks to get stable values, extracting… More >

Pengju Zhang¹, Jingbing Li^1,2,*, Uzair Aslam Bhatti^1,2, Jing Liu³, Yen-wei Chen⁴, Dekai Li¹, Lei Cao¹

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 5853-5870, 2023, DOI:10.32604/cmc.2023.036462

Abstract The amount of 3D data stored and transmitted in the Internet of Medical Things (IoMT) is increasing, making protecting these medical data increasingly prominent. However, there are relatively few researches on 3D data watermarking. Moreover, due to the particularity of medical data, strict data quality should be considered while protecting data security. To solve the problem, in the field of medical volume data, we proposed a robust watermarking algorithm based on Polar Cosine Transform and 3D-Discrete Cosine Transform (PCT and 3D-DCT). Each slice of the volume data was transformed by PCT to obtain feature row vector, and then the reshaped… More >

Panpan Cao^1,2, Xiulin Huang^1,3,*, Shenxu Bao⁴, Jin Yang^5,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.8, pp. 2041-2051, 2023, DOI:10.32604/fdmp.2023.027399

Abstract Using ethylene glycol monovinyl polyoxyethylene ether, 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and acrylic acid as the main synthetic monomers, a high robustness polycarboxylate superplasticizer was prepared. The effects of initial temperature, ratio of acid to ether, amount of chain transfer agent, and synthesis process on the properties of the superplasticizer were studied. The molecular structure was characterized by GPC (Gel Permeation Chromatography) and IR (Infrared Spectrometer). As shown by the results, when the initial reaction temperature is 15°C, the ratio of acid to ether is 3.4:1 and the acrylic acid pre-neutralization is 15%, The AMPS substitution is 10%, the amount of… More > Graphic Abstract