Mohsen Eid¹, Tamer Medhat^2,*, Manal E. Ali³

Computer Systems Science and Engineering, Vol.45, No.2, pp. 1531-1544, 2023, DOI:10.32604/csse.2023.031745

Abstract An information system is a type of knowledge representation, and attribute reduction is crucial in big data, machine learning, data mining, and intelligent systems. There are several ways for solving attribute reduction problems, but they all require a common categorization. The selection of features in most scientific studies is a challenge for the researcher. When working with huge datasets, selecting all available attributes is not an option because it frequently complicates the study and decreases performance. On the other side, neglecting some attributes might jeopardize data accuracy. In this case, rough set theory provides a useful approach for identifying superfluous… More >

Yiguang Wang^1,2, Zhe Zhang¹, Xun Zhang^1,*

Journal of Renewable Materials, Vol.11, No.3, pp. 1321-1337, 2023, DOI:10.32604/jrm.2022.023266

Abstract Fibre can enhance the mechanical properties of cement-based composites, but fibre also degrades their workability. However, the quantitative effects of fiber content and length-diameter ratio on alkali-activated materials are still unclear. Various aspect ratio, volume fraction of polyvinyl alcohol fibre (PVAF), and various water-binder ratio were employed to prepare a total of 26 groups of fibre reinforced alkali-activated composite (FRAAC). The influence of PVAF fibre factor (product of fiber volume fraction and length-diameter ratio) on flowability, compactness, strength, and crack fractal dimension of FRAAC was researched. The influence of water-binder ratio on the plastic viscosity of FRAAC was more significant… More >

Huazhe Jiao^1,2,3, Wenxiang Zhang^1,2,3,*, Yunfei Wang^1,2,3,*, Xinming Chen^1,2,3, Liuhua Yang^1,2,3, Yangyang Rong^1,2,3

Journal of Renewable Materials, Vol.11, No.3, pp. 1513-1529, 2023, DOI:10.32604/jrm.2023.026008

Abstract The green disposal of tailings solid waste is a problem to be solved in mine production. Cemented tailings filling stoping method can realize the dual goals of solid waste resource utilization and mined-out area reduction. However, the volume of the mined-out area of the open-pit method is larger than the filling capacity, resulting in the complex stratification of the underground backfill, and the strength of the backfill cannot meet the requirements. In this paper, according to the delamination situation, the specimens of horizontal and inclination angle layered cemented tailings backfill (LCTB) is made for a uniaxial compression test, and the… More >

Zihang Li^1,#, Zexin Wang^1,#, Zi Wang², Zijun Qin¹, Feng Liu¹, Liming Tan^1,*, Xiaochao Jin^3,*, Xueling Fan³, Lan Huang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.135, No.2, pp. 1521-1538, 2023, DOI:10.32604/cmes.2022.021639

Abstract Solid solution strengthening (SSS) is one of the main contributions to the desired tensile properties of nickel-based superalloys for turbine blades and disks. The value of SSS can be calculated by using Fleischer’s and Labusch’s theories, while the model parameters are incorporated without fitting to experimental data of complex alloys. In this work, four diffusion multiples consisting of multicomponent alloys and pure Ni are prepared and characterized. The composition and microhardness of single γ phase regions in samples are used to quantify the SSS. Then, Fleischer’s and Labusch’s theories are examined based on high-throughput experiments, respectively. The fitted solid solution… More >

Wei Chen^1,*, Weijie Shan¹, Yue Liang¹, Frederic Skoczylas²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.3, pp. 679-696, 2023, DOI:10.32604/fdmp.2022.021249

Abstract This study deals with the analysis of the detrimental effects of a “sulfate attack” on cement mortar for different dry-wet cycles. The mass loss, tensile strength, and gas permeability coefficient were determined and analyzed under different exposure conditions. At the same time, nitrogen adsorption (NAD), scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques were used to analyze the corresponding variations in the microstructure and the corrosion products. The results show that certain properties of the cement mortar evolve differently according to the durations of the dry-wet cycles and that some damage is caused to the mortars in aqueous solution.… More >

Ch. Venkat Ramana^*, Niranjan Ramchandra Thote, Arun Kumar Singh

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 1205-1214, 2023, DOI:10.32604/iasc.2023.031838

Abstract The tension cracks and joints in rock or soil slopes affect their failure stability. Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences. The actual slopes consist of inhomogeneous materials, complex morphology, and erratic joints. Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety (FoS) and Critical Slip Surface (CSS). In this article, the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor (SRF) method. An inclined Tension Crack (TC) influences the magnitude and location of… More >

Yunxia Zhou¹, Hisham Essawy², Ai Liu¹, Chenyu Yang¹, Defa Hou¹, Xiaojian Zhou^1,*, Guanben Du¹, Jun Zhang^1,*

Journal of Renewable Materials, Vol.11, No.2, pp. 837-852, 2023, DOI:10.32604/jrm.2022.022792

Abstract This study presents an easily prepared film based on alkaline starch-polyvinyl alcohol hybrid and lignin fiber as an additive (SPL film). The SPL film was prepared under acidic conditions through a polycondensation reaction of PVA and a mixture incorporating alkaline starch and lignin fiber from agriculture or forest source. The examination using scanning electron microscopy (SEM) showed that the surface of SPL film was smooth and the lignin fiber had good compatibility within the film hybrid. Electrospray ionization mass spectroscopy (ESI-MS) and fourier transform infrared (FTIR) investigations indicated that alkaline starch and lignin fiber reacted with PVA under acidic conditions… More > Graphic Abstract

Suiwei Pan¹, Anqi Ren¹, Yongli Peng¹, Min Wu², Wanguo Dong³, Chunlin Liu², Depeng Chen^2,*

Journal of Renewable Materials, Vol.11, No.2, pp. 881-904, 2023, DOI:10.32604/jrm.2022.023000

Abstract This study focuses on the workability and compressive strength of ceramsite self-compacting concrete with fine aggregate partially substituted by steel slag sand (CSLSCC) to prevent the pollution of steel slag in the environment. The SF, J-ring, visual stability index, and sieve analysis tests are primarily employed in this research to investigate the workability of freshly mixed self-compacting concrete containing steel slag at various steel slag sand replacement rates. The experiment results indicate that CSLSCC with the 20% volume percentage of steel slag (VPS) performs better workability, higher strength, and higher specific strength. The 7-day compressive strength of CSLSCC with the… More > Graphic Abstract

Hyoe Hatakeyama^1,*, Tatsuko Hatakeyama²

Journal of Renewable Materials, Vol.1, No.2, pp. 113-123, 2013, DOI:10.7569/JRM.2012.634111

Abstract Lignin and saccharides are two major components of plants. Huge amounts of plant residues are obtained as by-products of large-scale industries, such as pulp and paper, bio-fuel and the food industry. In this paper, preparation of polyurethane (PU) foam directly from various kinds of industrial lignin and molasses, which have scarcely been utilized, is summarized based on our results obtained by recent investigation. A onestep reaction using hydroxyl groups of plant materials as an active site makes it possible to produce a wide variety of PU, such as foams, sheets, gels and composite matrix. In this paper, PU foams receive… More >

Sihan Wang, Reza Masoodi^*, Janet Brady, Brian R. George

Journal of Renewable Materials, Vol.1, No.4, pp. 279-288, 2013, DOI:10.7569/JRM.2013.634122

Abstract Recycled natural fi bers and biopolymers with sustainable, eco-friendly, and biodegradable properties are receiving increased attention. The moisture absorption and swelling of natural fi ber composites adversely infl uence their mechanical properties and applications. In this research, bio-based epoxy polymers that are reinforced with recycled woven jute fabrics were subjected to water immersion tests in order to study the effect of water absorption on their mechanical and geometrical properties. For comparison, petroleum-based epoxy polymers that are reinforced with new woven jute fabrics were also subjected to the same tests. The effect of fi ber percentage on water absorption, thickness swelling,… More >