Soumaya Zormati, Fadhel Aloulou^*, Habib Sammouda

Journal of Renewable Materials, Vol.11, No.5, pp. 2345-2365, 2023, DOI:10.32604/jrm.2023.026170

Abstract

The objective of this study is to analyze the effects of using surfactant (CTAB) and cellulose nanofibers (NFC) as an admixture in cement mortars. We examined composite properties as porosity, compression energy, thermal conductivity and hydration. The results showed that with the addition of 0.7% by weight of NFC per emulsion in the presence of a cationic surfactant (CTAB). The new material produced presented a dry porosity between 4.7% and 4.4%, compressive strength between 9.8 and 22.9 MPa, and thermal conductivity between 0.95 and 2.25 W·m⁻¹·K⁻¹. Thus we show better mechanical and thermal performance than that traditional Portland cement mortar… More > Graphic Abstract

Nina Graupner^1,*, Thiprada Poonsawat², Koranat Narkpiban^3,4, Jörg Müssig¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2279-2300, 2023, DOI:10.32604/jrm.2023.025529

Abstract Thailand has a huge variability of bast fiber plants, some of which have been little researched regarding their applicability in composites. Bast fiber(bundle)s from different species were investigated and incorporated into a polylactide (PLA) matrix by injection molding. Hemp and kenaf were used as well-studied fibers, while roselle, Fryxell and paper mulberry are less extensively characterized. Tensile strength, tensile modulus and interfacial shear strength (IFSS) of single fiber(bundle)s were highest for hemp, followed by kenaf, roselle, Fryxell and paper mulberry. Despite the lower tensile strength and IFSS of paper mulberry, the highest tensile strength was achieved for the paper mulberry/PLA… More > Graphic Abstract

Yiwen Zhang¹, Jianjun Xie^1,*, Minghui Sun¹, Shaolong Wang¹, Tengfei Xu^2,3, Yonggen Xu^2,3, Xiaoqing Ding^2,3, Ying Shi¹, Lei Zhang¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2125-2141, 2023, DOI:10.32604/jrm.2023.025127

Abstract Foam glass is a kind of green building material that is widely used because of its excellent thermal insulation and mechanical properties. In this study, the borosilicate foam glass was fabricated by powder sintering method using recycled soda lime waste glass, quartz, and borax as the primary raw materials. CaCO₃ was used as a foaming agent and Na₂CO₃ as a flux agent. Results showed that as the quartz content decreases from 30 to 17.5 wt.% and borax content increases from 5 to 17.5 wt.%, the pore size, porosity, and thermal insulation of borosilicate foam glass increase significantly, while the compressive strength decreases… More > Graphic Abstract

Lingling Qin¹, Mengya Zhou¹, Jiahao Yan¹, Ping Duan^1,2,3,4,*, Yingcan Zhu^5,*, Wei Chen⁶, Zuhua Zhang⁷, Aiguo Wang²

Journal of Renewable Materials, Vol.11, No.5, pp. 2191-2208, 2023, DOI:10.32604/jrm.2023.025197

Abstract Montmorillonite and clinoptilolite zeolite were used as representative materials to prepare calcined clay-cement binary cementitious materials in order to study the effect of calcination treatment on the activation of clay minerals and the activity difference between layered and framed clays in this research. The influence of different calcined clay content (2%, 4%, 6%, 8%, 10%) on the fluidity, compressive strength, microstructure, phase change, and hydration heat of cement-based materials were analyzed. The calcined clay improves the fluidity of cement-based materials as compared with the uncalcined group. The addition of calcined montmorillonite (CMT) improves the development of mechanical strength, and the… More > Graphic Abstract

Jiazheng Du^*, Xue Cong, Ying Zhang

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1091-1120, 2023, DOI:10.32604/cmes.2023.025585

Abstract Spacecraft in the aerospace field and military equipment in the military field are at risk of being impacted by external objects, which can cause local damage to the structure. The randomness of local damage is a new challenge for structural design, and it is essential to take random damage into account in the conceptual design phase for the purpose of improving structure’s resistance to external shocks. In this article, a random damaged structure is assumed to have damages of the same size and shape at random locations, and the random damage is considered as multiple damage conditions of the structure.… More > Graphic Abstract

Hongtao Liu¹, Maoxian Xiong¹, Bo Zhang^2,*, Junfeng Xie¹, Jinrui Deng¹, MifengZhao², Ruijing Jiang¹, Yushan Zheng¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.6, pp. 1709-1720, 2023, DOI:10.32604/fdmp.2023.025513

Abstract Pitting corrosion often occurs due to the presence of various corrosive substances, such as CO₂ and H₂S, in the pipe service environment. As a result of this process, the residual strength of oil pipes is reduced and this can compromise the integrity of the entire pipe string. In the present work, a model is introduced on the basis of the API579 standard to determine the so-called stress concentration coefficient. The model accounts for pitting corrosion shapes such as shallow semi-circles, semi-circles, and deep semi-circles. The relationship between the corrosion pit depth and opening diameter and the residual strength of the… More >

R. Rema^*, N. Nalanth

Intelligent Automation & Soft Computing, Vol.36, No.2, pp. 1497-1506, 2023, DOI:10.32604/iasc.2023.032540

Abstract Researchers worldwide have employed a varied array of sources to calculate the successful management of Construction and Demolition (C&DW). Limited research has been undertaken in the domain of Construction and Demolition Waste Management (C&DWM) and consequently leaving a large gap in the availability of effective management techniques. Due to the limited time available for building removal and materials collection, preparing for building materials reuse at the end of life is frequently a challenging task. In this research work Convolutional Neural Network-Long Short-Term Memory (CNN-LSTM) is proposed to predict the number of waste materials that are obtained from a building at… More >

Wankui Ni¹, Jiaxin Zhong^1,2, Haiman Wang^1,*

Journal of Renewable Materials, Vol.11, No.4, pp. 1699-1814, 2023, DOI:10.32604/jrm.2022.023805

Abstract Fiber-reinforced soils have been of great interest to experimenters for building foundations’strength performance, time, and economy. This paper investigates the effects of water content and polypropylene fiber dosage and length on loess’s unconfined compressive strength (UCS) according to the central composite response surface design test procedure. The water content is 11%–25%, the mass ratio of fiber to soil is 0.1%–0.9%, and the fiber length ranges from 6–18 mm. The response surface method (RSM) developed full quadratic models of different variables with response values. After analysis of variance (ANOVA), the mathematical model developed in this study was statistically significant (p ≤… More > Graphic Abstract

Zhihai He^1,2, Menglu Shen¹, Jinyan Shi^3,*, Jingyu Chang¹, Víctor Revilla-Cuesta⁴, Osman Gencel⁵

Journal of Renewable Materials, Vol.11, No.4, pp. 1835-1852, 2023, DOI:10.32604/jrm.2023.024887

Abstract Recycling solid waste in cement-based materials cannot only ease its load on the natural environment but also reduce the carbon emissions of building materials. This study aims to investigate the effect of recycled glass powder (RGP) on the early-age mechanical properties and autogenous shrinkage of cement pastes, where cement is replaced by 10%, 20% and 30% of RGP. In addition, the microstructure and nano-mechanical properties of cement paste with different RGP content and water to binder (W/B) ratio were also evaluated using SEM, MIP and nanoindentation techniques. The results indicate that the early-age autogenous shrinkage decreases with the increase of… More > Graphic Abstract

Leiju Tian¹, Yuhuan Bu^1,*, Huajie Liu^1,*, Lingyun Zhao^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1215-1226, 2023, DOI:10.32604/fdmp.2022.022219

Abstract The mechanical properties of Portland cement differ from the weakly consolidated shallow formation in deep water. This results in undesired abrupt changes in the compressive strength and elastic modulus at the cement–formation interface. In this study, a water-borne epoxy resin was applied as a strengthening material to reinforce the weakly consolidated shallow formation and protect the cement sheath from potential failure. The mechanical properties of the unconsolidated clay were tested, including their changes with increases in the temperature and curing time. In addition, the effects of the seawater, cement slurry alkaline filtrate, and saltwater drilling fluid were evaluated. As confirmed… More >