Shyam Sathanandam¹, Pooja Kashyap¹, David Zurakowski², Lindsey Bird¹, Vera McGhee³, Jeffrey Towbin¹, Benjamin Rush Waller III¹

Congenital Heart Disease, Vol.12, No.2, pp. 181-187, 2017, DOI:10.1111/chd.12423

Abstract Objectives: The primary aim of this study was to compare thermodilution (TD) cardiac index (TDCi) measured by injecting cold saline (C-TDCi) to saline at room temperature (R-TDCi). The secondary aim was to assess the change in body temperature with cold saline injections in children.
Design: This is a prospective, case control study.
Setting: Cardiac catheterization lab at Le Bonheur Children’s Hospital, Memphis, Tennessee.
Patients: Eighty-six children ≤18 years of age that underwent cardiac catheterization between April 2013 and April 2015, excluding patients with admixing lesions, on inotropic support and with ejection fraction < 30%.
Interventions: A TD catheter in the… More >

J. Serrano-Arellano¹, J. M. Belman-Flores^2,*, I. Hernández-Pérez³, K. M. Aguilar-Castro³, E. V. Macías-Melo³, F. Elizalde-Blancas², J. M. Riesco-Ávila², F. J. García-Rodríguez⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.2, pp. 571-602, 2020, DOI:10.32604/cmes.2020.08677

Abstract In the present study, an analysis of the heat and mass transfer in a ventilated cavity in a warm climate zone was carried out to analyze, among others, the temperatures and percentage of relative humidity (RH). The governing equations of the mathematical model were solved through the finite volume method. We used the k-ε turbulence mode to find the results of the variables of interest in seven climate records on a given day. The velocity of the inlet flow of the air-H₂O mixture was varied through the Reynolds number (Re) from 500 to 10000. The outdoor weather conditions considered were… More >

Yuanliang Tang^{1, 2}, Lizhong Mu¹, Ying He^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 281-296, 2020, DOI:10.32604/fdmp.2020.06760

Abstract The aim of this study is to develop a model of fluid and heat transfer in a biological tissue taking into account the exact structure of the related microvascular network, and to analyze the influence of structural changes of such a network induced by diabetes. A cubic region representing local skin tissue is selected as the computational domain, which in turn includes two intravascular and extravascular sub-domains. To save computational resources, the capillary network is reduced to a 1D pipeline model and embedded into the extravascular region. On the basis of the immersed boundary method (IBM) strategy, fluid and heat… More >

Ping Yu^{1, *}, Chuanhui Huang¹, Lei Liu¹, Huafeng Guo¹, Chengqiang Liu¹

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 267-280, 2020, DOI:10.32604/fdmp.2020.06528

Abstract To study the heat and mass transfer characteristics of alkali metals in a combined porous wick in high-temperature heat pipes, a three-dimensional (3-D) numerical model is constructed by using the finite volume method, Darcy’s theory, and the theory of local thermal equilibrium. The research finds that the pressure drop of fluids flowing through a combined porous wick exhibits an increasing trend with increasing flow velocity at the inlet and with decreasing permeability of the porous media; a combined porous wick of lower porosity and permeability and larger fluid velocity at the inlet is found to have a less uniformly distributed… More >

Weiwei Lu^1,*, Yirui Zhang¹, Yixian Yao¹, Yuying Wu¹, Han Y. H. Chen², Hailin Zhang³, Jia Yu⁴, Caiqin Shen⁵, Qi Liu⁶, Honghua Ruan^1,*

Phyton-International Journal of Experimental Botany, Vol.89, No.1, pp. 13-26, 2020, DOI:10.32604/phyton.2020.09125

Abstract The priming effect (PE) induced by biochar provides a basis for evaluating its carbon (C) sequestration potential in soils. A 60 days’ laboratory incubation was conducted, which involved the amendment of biochar (1% of soil mass) produced from rice straw at 300ºC (B300) and 500ºC (B500) to young (Y) and old (O) poplar plantation soils, with the aim of studying the responses of biochar-induced PEs to poplar plantation ages. This incubation included six treatments: Y + CK (control), Y + B300, Y + B500, O + CK, O + B300, and O + B500. Carbon dioxide (CO₂) emissions were significantly… More >

Yundong Han¹, Dawei Chen¹, Shaoqing Liu¹, Gang Xu²

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.1, pp. 1-19, 2020, DOI:10.32604/fdmp.2020.06525

Abstract A series of tests have been conducted using a Cryogenic Wind Tunnel to study the effect of Reynolds number (Re) on the aerodynamic force and surface pressure experienced by a high speed train. The test Reynolds number has been varied from 1 million to 10 million, which is the highest Reynolds number a wind tunnel has ever achieved for a train test. According to our results, the drag coefficient of the leading car decreases with higher Reynolds number for yaw angles up to 30º. The drag force coefficient drops about 0.06 when Re is raised from 1 million to 10… More >

Shuo Yang¹, Yuanhai Li^{1, 2, ∗}, Xiaojie Tang^{1, 2}, Jinshan Liu^{1, 2}

CMES-Computer Modeling in Engineering & Sciences, Vol.122, No.2, pp. 633-659, 2020, DOI:10.32604/cmes.2020.07919

Abstract The deformation and damage evolution of sandstone after heat treatment greatly influence the efficient and safe development of deep geothermal energy extraction. To investigate this issue, laboratory confined compression tests and numerical simulations were conducted on pre-holed sandstone specimens after heat treatment. The laboratory test results show that the failure modes are closely related to the heat treatment temperature, with increasing treatment temperature, the failure modes change from mixed and shear modes to a splitting mode. The cracks always initiate from the sidewalls of the hole and then propagate. The failure process inside the hole proceeds as follows: calm period,… More >

Anupam Bhandari^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 557-582, 2019, DOI:10.32604/fdmp.2019.04108

Abstract The present research aims to examine the steady state of the two-dimensional incompressible magnetohydrodynamics (MHD) flow of a micropolar nanofluid over a stretching sheet in the presence of chemical reactions, radiation and viscous dissipation. The effect of particle rotation is taken into account. A conducting fluid passes over a semi-infinite plate with variable temperature while a magnetic field is directed in the transverse direction. Results for velocity, angular momentum, temperature and concentration profiles are obtained for various values of Eckert number, Schmidt number, Prandtl number, thermophosis parameter and Brownian motion parameters. A similarity approach is used to transform the original… More >

Michael R. Snowdon^1,2, Amar K. Mohanty^1,2, Manjusri Misra^1,2*

Journal of Renewable Materials, Vol.5, Suppl.1, pp. 94-105, 2017, DOI:10.7569/JRM.2017.634134

Abstract This article assesses the performance of a biobased carbon as a nucleator using common techniques to stimulate poly(lactic acid) crystallization and enhance the thermal stability of PLA during injection molding. The combination of a biodegradable plasticizer, poly(ethylene glycol) (PEG), along with biobased carbon-rich pyrolyzed biomass char residue and an industrially available microcrystalline talc, were tested for nucleating agent capabilities at additions of 10 wt%. Differential scanning calorimetry (DSC) data demonstrated that the inclusion of the plasticizer could increase the PLA crystalline content with further improvements when nucleating agent was present. With a higher mold temperature, the PLA crystallinity surpassed 40%… More >

Ayerdi Gotor A^1,5*, M Berger¹, F Labalette², S Centis³, J Daydé¹, A Calmon^1,4

Phyton-International Journal of Experimental Botany, Vol.84, No.1, pp. 14-25, 2015, DOI:10.32604/phyton.2015.84.014

Abstract Sunflower oil is naturally rich in both unsaturated fatty acids and numerous minor components, with high levels of α-tocopherol and phytosterols that could play an important role in plant protection. These micronutriments, tocopherols and phytosterols, also exhibit health benefits for humans including reducing both cardiovascular diseases and aging disorders. α−Tocopherol represents more than 95% of total sunflower tocopherol and has the greatest vitaminic activity. Furthermore, this oil contains high amounts of β-sitosterol which is a promising health beneficial phytosterol. The objective of this study was to compare the content and composition of fatty acids, tocopherols and phytosterols in sunflower oil… More >