K.N. Song¹, S. D. Hong¹

Structural Durability & Health Monitoring, Vol.9, No.2, pp. 155-165, 2013, DOI:10.32604/sdhm.2013.009.155

Abstract The IHX (Intermediate Heat Exchanger) of a VHTR (Very High Temperature Reactor) transfers 950° heat generated from the VHTR to a hydrogen production plant. The Korea Atomic Energy Research Institute (KAERI) has manufactured a lab-scale PCHE (Printed Circuit Heat Exchanger) prototype made of SUS316L under consideration as a candidate. In this study, as a part of a hightemperature structural integrity evaluation of the lab-scale PCHE prototype, a macroscopic structural behavior analysis including structural analysis modeling and a thermal/elastic structural analysis was carried out under the test conditions of a helium experimental loop (HELP) as a precedent study for a performance… More >

Kerlin P. Robert¹, Jiaoyan Li², James D. Lee^1,*

Molecular & Cellular Biomechanics, Vol.16, Suppl.2, pp. 74-74, 2019, DOI:10.32604/mcb.2019.07125

Abstract This presentation focuses on the new and upcoming concept of 4D printing and its vast scope and importance in the research and development in industry. The 3D printing object is considered as a layered structure. Each layer may have different orientation. Therefore each layer may behave differently under the change of its environment. We formulate the theoretical shape changing process of 4D printing resulted from (I) the biological growth or swelling, (II) the change of temperature, and (III) the effect of electric field on piezoelectric material of the 3D printing product. Then we illustrate this theory visually through finite element… More >

K.N. Song¹

Structural Durability & Health Monitoring, Vol.8, No.3, pp. 209-222, 2012, DOI:10.32604/sdhm.2012.008.209

Abstract A PHE (Process Heat Exchanger) is a key component in transferring the high temperature heat generated from a VHTR (Very High Temperature Reactor) to the chemical reaction for the massive production of hydrogen. A performance test on a small-scale PHE prototype made of Hastelloy-X is currently under way a small-scale gas loop at the Korea Atomic Energy Research Institute. Previous research on the elastic high-temperature structural analysis of the small-scale PHE prototype has been performed using the parent material properties over the whole region. In this study, an elastic-plastic high-temperature structural analysis considering the mechanical properties in the weld-affected zone… More >

K.N. Song¹

Structural Durability & Health Monitoring, Vol.7, No.4, pp. 297-306, 2011, DOI:10.3970/sdhm.2011.007.297

Abstract The IHX (Intermediate Heat Exchanger) of a VHTR (Very High Temperature Reactor) transfers 950° heat generated from the VHTR to a hydrogen production plant. The Korea Atomic Energy Research Institute (KAERI) has manufactured a small-scale prototype of a PCHE (Printed Circuit Heat Exchanger) under consideration as a candidate of the IHX. In this study, as a part of high-temperature structural integrity evaluation of the small-scale PCHE prototype, we carried out a macroscopic structural behavior analysis including structural analysis modeling and thermal/elastic structural analysis under small-scale gas loop test conditions as a precedent study to a performance test. The results obtained… More >

N.H.M. Kamrujjaman Serker¹, Zhishen Wu

Structural Durability & Health Monitoring, Vol.5, No.2, pp. 87-108, 2009, DOI:10.3970/sdhm.2009.005.087

Abstract This paper presents the study on the temperature sensitivity of some vibration-based damage identification techniques. With the help of a simple supported beam with different damage levels, reliability of these techniques for damage identification in a changing environmental temperature condition was investigated. The temperature effect was considered as the change in modulus of elasticity of the material. The techniques evaluated herein are based on measured modal parameters which use only few mode shapes and/or modal frequencies of the structure that can easily be obtained by dynamic tests. The effect of temperature on identification of different level of damages at different… More >

A.B. Mahmud Hasan^1,2, M A Wahab¹, S.M. Guo¹

Structural Durability & Health Monitoring, Vol.4, No.4, pp. 231-240, 2008, DOI:10.3970/sdhm.2008.004.231

Abstract This paper presents details analysis of Heat Affected Zone (HAZ) in High Temperature Vacuum Tube Furnace (HTVTF) to predict fracture region in tube wall due to thermal stress from temperature variation across its thickness. A simple mathematical model is used to illustrate stress concentration arising due to thermal stresses in tube wall and HAZs. Finite element model and analysis were carried out utilizing finite element analysis commercial codes. Combination of thermal stress due to temperature difference determine fracture region. Experimental and simulation results of inside temperature of tube are observed and similar relation have been found. Observation of heat affected… More >

Kamran Nikbin¹

Structural Durability & Health Monitoring, Vol.3, No.1, pp. 51-68, 2007, DOI:10.3970/sdhm.2007.003.051

Abstract Weldments and welded regions of components are likely to see failure at elevated temperatures earlier than homogenous parent material. In some cases variable loading could also introduce creep/fatigue crack growth. These weld regions not only contain variable creep properties but are likely to contain residual stresses which could relax in time. There are three key factors which may determine a successful outcome for remaining life assessment of engineering components containing residual stresses in the vicinity of welds. The first is standardized testing and measurement procedures. The second is the development of appropriate and accurate correlating parameters to treat the results… More >

Marcelo HERNANDO¹, Christian HOUGHTON¹, Leda GIANNUZZI², Bernd KROCK³, Darío ANDRINOLO², Gabriela MALANGA^4,*

BIOCELL, Vol.40, No.1, pp. 23-26, 2016, DOI:10.32604/biocell.2016.40.023

Abstract Cyanobacteria are phototrophic organisms with great ecological and economical importance. Species of the genus Microcystis are known for their potential ability to synthesize toxins, notably microcystins. There is a growing interest in the evaluation of oxidative stress in relation to the impact of global climate change on natural ecosystems in different trophic levels. Several studies have focused on the analysis of organismal responses to mitigate the damage by controlling the generation of reactive oxygen species. Variations in environmental factors caused by climate change generate a situation of oxidative damage in Microcystis aeruginosa as a direct or indirect consequence. In this… More >

Xin ZM^1,2, MH Liu², Q Lu^1,3, CA Busso⁵, YJ Zhu^1,3, Z Li², YR Huang², XL Li2, FM Luo², F Bao¹, JQ Qian^4*, YH Li^1,3*

Phyton-International Journal of Experimental Botany, Vol.87, pp. 144-155, 2018, DOI:10.32604/phyton.2018.87.144

Abstract Leaf δ¹³C is widely used to explain plant strategies related to resource availability in different environments. However, the coupled response of leaf δ¹³C to precipitation and temperature as well as the relationship between leaf δ¹³C and leaf traits remain unclear. The leaf δ¹³C and its relationship with leaf traits [leaf size (LS), leaf length (LL), leaf width (LW), leaf length to width ratio (L:W), specific leaf area (SLA) and mass-based leaf nitrogen concentration (N_mass)] were investigated on the dominant shrub species Nitraria tangutorum Bobr. in the arid region (Dengkou and Minqin) of northwestern China under the simulated increasing precipitation (PGS)… More >

Chaoyi Wan^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 343-356, 2019, DOI:10.32604/fdmp.2019.07812

Abstract A comparative numerical study has been conducted on the thermal performance of a heat pipe cooling system considering several influential factors such as the coolant flow rate, the coolant inlet temperature, and the input power. A comparison between numerical data and results available in the literature has demonstrated that our numerical procedure could successfully predict the heat transfer performance of the considered heat pipe cooling system for a battery. Specific indicators such as temperature, heat flux, and pressure loss were extracted to describe the characteristics of such a system. On the basis of the distributions of the temperature ratio of… More >