Ayesha Maqbool^1,*, Farkhanda Afzal², Tauseef Rana³, Alina Mirza⁴

Intelligent Automation & Soft Computing, Vol.28, No.3, pp. 653-667, 2021, DOI:10.32604/iasc.2021.017506

Abstract This paper presents a co-operative, self-organisation method for Multiple Autonomous Vehicles aiming to share surveillance responsibilities. Spatial organization or formation configuration of multiple vehicles/agents’ systems is crucial for a team of agents to achieve their mission objectives. In this paper we present simple yet efficient thermodynamic inspired formation control framework. The proposed method autonomously allocates region of surveillance to each vehicle and also re-adjusts the area of their responsibilities during the mission. It provides framework for heterogeneous UAVs to scatter themselves optimally in order to provide maximum coverage of a given area. The method is inspired from a natural phenomenon… More >

YANJUAN LIAO^1,#, DONGLING YU^2,#, XIAOFANG QIN¹, JINMEI WU¹, HUI WEI¹, HUI LI¹, XIANGYING MA^1,*, ZAIYIN HUANG^1,*

BIOCELL, Vol.44, No.4, pp. 703-711, 2020, DOI:10.32604/biocell.2020.012047

Abstract Despite the great potential of photosynthetic microbes in the production of renewable fuels, value-adding chemicals, and water treatment, etc., commercial utilization of them is significantly hindered by the lack of techniques to accurately monitor the thermodynamic and kinetic characteristics of the In-situ growth of microbes under controlled light illumination for optimal cultivation. Herein, we demonstrated that a newly developed highly sensitive photo-microcalorimetric system successfully captured the impacts of the light wavelength and strength on the thermodynamic and kinetic parameters of the In-situ growth of Rhodopseudomonas palustris, a representative photosynthetic microorganism. To our best knowledge, this is the first time that… More >

Xiaobin Shu, Miaomiao Ren^*

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.5, pp. 1019-1029, 2020, DOI:10.32604/fdmp.2020.09564

Abstract In order to address typical problems due to the huge demand of oil for consumption in traditional internal combustion engines, a new more efficient combustion mode is proposed and studied in the framework of Computational Fluid Dynamics (CFD). Moreover, a Non-dominated Sorting Genetic Algorithm (NSGA-II) is applied to optimize the related parameters, namely, the engine methanol ratio, the fuel injection time, the initial temperature, the Exhaust Gas Re-Circulation (EGR) rate, and the initial pressure. The so-called Conventional Diesel Combustion (CDC), Homogeneous Charge Compression Ignition (HCCI) and the Reactivity Controlled Compression Ignition (RCCI) combustion modes are compared. The results show that… More >

Donghua Dai^1,2, Dongdong Gu^1,2,*, Qing Ge^1,2, Chenglong Ma^1,2, Xinyu Shi^1,2, Han Zhang^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.3, pp. 1085-1098, 2020, DOI:10.32604/cmes.2020.010927

Abstract The three-dimensional physical model of the randomly packed powder material irradiated by the laser beam was established, taking into account the transformation of the material phase, the melt spreading and the interaction of the free surface of the molten pool and the recoiling pressure caused by the material evaporation during the selective laser melting. Influence of the processing parameters on the thermal behavior, the material evaporation, the surface morphology and the densification behavior in the connection region of the molten pool and the substrate was studied. It was shown that the powder material underwent the transformation from the partial melting… More >

Matthieu Ancellin^{1, *}, Laurent Brosset², Jean-Michel Ghidaglia¹

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 359-381, 2020, DOI:10.32604/fdmp.2020.08642

Abstract Numerous models have been proposed in the literature to include phase change into numerical simulations of two-phase flows. This review paper presents the modeling options that have been taken in order to obtain a model for violent separated flows with application to sloshing wave impacts. A relaxation model based on linear non-equilibrium thermodynamics has been chosen to compute the rate of phase change. The integration in the system of partial differential equations is done through a non-conservative advection term. For each of these modelling choices, some alternative models from the literature are presented and discussed. The theoretical framework for all… More >

Dugang Guo^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 419-430, 2019, DOI:10.32604/fdmp.2019.07831

Abstract The role of different grid search computer algorithms for the determination of the thermodynamic properties of water and steam in the p-T and P-S planes has been investigated via experimental and analytical methods. The results show that the spline interpolation grid search algorithm and the power grid search algorithm are more efficient, stable and clear than other algorithms. More >

E.T.R. Dean¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.4, No.4, pp. 231-242, 2007, DOI:10.3970/icces.2007.004.231

Abstract The shapes of yield envelopes for soils and other materials are generally taken as the starting point of a macroscopic plasticity model. This paper shows that these shapes can be accurately predicted using recent advances in thermodynamics and the new concept of multi-scale patterns. Some implications for future models are discussed. More >

Sergei Bronnikov¹, Sergei Kostromin, Vyacheslav Zuev

The International Conference on Computational & Experimental Engineering and Sciences, Vol.9, No.4, pp. 207-214, 2009, DOI:10.3970/icces.2009.009.207

Abstract Kinetics of the ordered phase growth in a melted multi-component liquid crystalline mixture subjected to a deep cooling was studied using polarizing optical microscopy. The droplets of the ordered phase revealed in the optical images across the phase transition were segmented and treated statistically. In the resulting histograms, two overlapping statistical ensembles related to two main components of the mixture were recognized. These ensembles were successfully described using principles of irreversible thermodynamics and the mean droplet diameters within both ensembles were determined. Analysis of the mean droplet diameter as a function of time allowed recognition of two regimes involved in… More >

Abha Dubey^1*, Anuradha Mishra²

Journal of Renewable Materials, Vol.5, No.1, pp. 54-61, 2017, DOI:10.7569/JRM.2016.634127

Abstract Biosorption effectively removes heavy metal ions by using inexpensive biosorbents. In this study, Portulaca oleracea plant waste biomass was used as environmentally friendly biosorbent for the removal of copper ions from aqueous solution. This article includes the study of the effects of various important parameters on the biosorption process. Maximum biosorption was found to occur under slightly acidic conditions (pH 6). Small particle size, moderate agitation speed, and moderate temperature favor the biosorption process. The Langmuir model was most suitable, showing the biosorption capacity to be 85.470 mg/g. Pseudo-secondorder model best described the kinetics of the biosorption process. Thermodynamic studies… More >

V. Carandente¹, R. Savino¹, M. Iacovazzo¹, C. Boffa

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.4, pp. 461-484, 2013, DOI:10.3970/fdmp.2013.009.461

Abstract The article deals with the aerothermal analysis of a sample-return hypersonic capsule reentering on Earth from an interplanetary exploration mission. The main objective of the work is to estimate the heat flux distribution on the capsule surface and to perform one-dimensional thermal analyses for its ablative heat shield. After a short review of sample-return missions, the numerical models implemented are described and the computational results, obtained along a feasible reentry trajectory, are presented and discussed. Particular attention has been paid to compare the convective stagnation point heat fluxes obtained by means of Computational Fluid Dynamic (CFD) analyses with the ones… More >