José M. R. C. A. Santos^*, Ana R. Sampaio, Joana Branquinho

Journal of Renewable Materials, Vol.4, No.1, pp. 31-40, 2016, DOI:10.7569/JRM.2015.634123

Abstract Cellulose-based materials are one of the most widely used materials provided by nature to mankind. In particular, cotton fi bers have been used for millennia to produce clothing items. This wide usage stems from the inherent properties of cotton fabrics such as hydrophilicity and permeability to water vapor. However, increasingly sophisticated uses for cotton-based clothing (e.g., technical textiles) demand specifi c properties such as hydrophobicity and oleophobicity for repellent functions. The current surface treatments used to attain these functionalities are based on thermally initiated polymerization reactions, using water-based formulations. Thus, the current technologies are energy- and water-intensive. The advantages of… More >

Yaghoub Dabiri^1,3, Kevin L. Sack^1,2, Semion Shaul¹, Gabriel Acevedo-Bolton¹, Jenny S. Choy³, Ghassan S. Kassab³, Julius M. Guccione^1,*

Molecular & Cellular Biomechanics, Vol.16, No.3, pp. 185-197, 2019, DOI:10.32604/mcb.2019.07364

Abstract We hypothesized that minimally invasive injections of a softening agent at strategic locations in stiff myocardium could de-stiffen the left ventricle (LV) globally. Physics-based finite element models of the LV were created from LV echocardiography images and pressures recorded during experiments in four swine. Results confirmed animal models of LV softening by systemic agents. Regional de-stiffening of myocardium led to global de-stiffening of LV. The mathematical set up was used to design LV global de-stiffening by regional softening of myocardium. At an end diastolic pressure of 23 mmHg, when 8 ml of the free wall was covered by intramyocardial injections,… More >

Jianhang Du^1,2,3, Liang Wang⁴

Molecular & Cellular Biomechanics, Vol.12, No.4, pp. 249-263, 2015, DOI:10.3970/mcb.2015.012.249

Abstract Growing evidences suggest that long-term enhanced external counterpulsation (EECP) treatment can inhibit the initiation of atherosclerotic lesion by improving the hemodynamic environment in aortas. However, whether this kind procedure will intervene the progression of advanced atherosclerotic plaque remains elusive and causes great concern in its clinical application presently. In the current paper, a pilot study combining animal experiment and numerical simulation was conducted to investigate the acute mechanical stress variations during EECP intervention, and then to assess the possible chronic effects. An experimentally induced hypercholesterolemic porcine model was developed and the basic hemodynamic measurement was performed in vivo before and… More >

Jie Wu^∗,†, Yan Cai^‡, Shixiong Xu^§, Quan Long^¶, Zurong Ding^*, Cheng Dong^∗,||

Molecular & Cellular Biomechanics, Vol.9, No.2, pp. 95-126, 2012, DOI:10.3970/mcb.2012.009.095

Abstract The effects of vascular-disrupting treatments on normalization of tumor microvasculature and its microenvironmental flow were investigated, by mathematical modeling and numerical simulation of tumor vascular-disrupting and tumor haemodynamics. Four disrupting approaches were designed according to the abnormal characteristics of tumor microvasculature compared with the normal one. The results predict that the vascular-disrupting therapies could improve tumor microenvironment, eliminate drug barrier and inhibit metastasis of tumor cells to some extent. Disrupting certain types of vessels may get better effects. In this study, the flow condition on the networks with "vascular-disrupting according to flowrate" is the best comparing with the other three… More >

Zhiliang Wang^1,*, Nuocheng Tian², Jianguo Wang³, Shengqi Yang³, Guang Liu¹

CMC-Computers, Materials & Continua, Vol.59, No.1, pp. 275-296, 2019, DOI:10.32604/cmc.2019.04247

Abstract The mechanical behaviors and energy dissipation characteristics of heat-treated granite were investigated under repeated impact loading. The granite samples were firstly heat-treated at the temperature of 20°C, 200°C, 400°C, and 600°C, respectively. The thermal damage characteristics of these samples were then observed and measured before impact tests. Dynamic impact compression tests finally were carried out using a modified split-Hopkinson pressure bar under three impact velocities of 12 m/s, 15 m/s, and 18 m/s. These test results show that the mineral composition and the main oxides of the granite do not change with these treatment temperatures. The number of microcracks and… More >

Ali Raza¹, Muhammad Shoaib Arif^1,*, Muhammad Rafiq², Mairaj Bibi³, Muhammad Naveed¹, Muhammad Usman Iqbal⁴, Zubair Butt⁴, Hafiza Anum Naseem⁴, Javeria Nawaz Abbasi³

CMES-Computer Modeling in Engineering & Sciences, Vol.120, No.2, pp. 445-465, 2019, DOI:10.32604/cmes.2019.06454

Abstract This writing is an attempt to explain a reliable numerical treatment for stochastic computer virus model. We are comparing the solutions of stochastic and deterministic computer virus models. This paper reveals that a stochastic computer virus paradigm is pragmatic in contrast to the deterministic computer virus model. Outcomes of threshold number C^∗ hold in stochastic computer virus model. If C^∗ < 1 then in such a condition virus controlled in the computer population while C^∗ > 1 shows virus persists in the computer population. Unfortunately, stochastic numerical methods fail to cope with large step sizes of time. The suggested structure… More >

Zhe Li¹, Fan Yang^1,*, Yaping Liu¹, Yukui Gao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.120, No.1, pp. 157-175, 2019, DOI:10.32604/cmes.2019.05187

Abstract In this paper, we investigated the shot blast treatment for derusting application through finite element (FE) simulations with a large number of random shots. The element deletion technique based on dynamic failure criteria was used to model the removal of rust. The cohesive surface model with damage evolution was used to characterize the decohesion of the rust/substrate interface. The effects of various processing and material parameters on the derusting effectiveness were examined. The results show that the rate of derusting mainly depends on the shot size, velocity and impinging angle, with little relevance to the rust thickness. The spalling of… More >

M. Khezri¹, Z. Vrcelj¹, M.A. Bradford^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.4, pp. 271-306, 2012, DOI:10.3970/cmes.2012.087.271

Abstract A finite strip method (FSM) utilising the generalised reproducing kernel particle method (RKPM) [Behzadan, Shodja, and Khezri (2011)] is developed for the bending analysis of thin plates. In this innovative approach, the spline functions in the conventional spline finite strip method (SFSM) are replaced with generalised RKPM 1-D shape functions in the longitudinal direction, while the transverse cubic functions which are used in the conventional formulations are retained. Since the generalised RKPM is one of the class of meshfree methods which deal efficiently with derivative-type essential boundary conditions, its introduction in the FSM is beneficial for solving boundary value problems… More >

Peter J. Ireman, Anders Klarbring¹, Niclas Strömberg

CMES-Computer Modeling in Engineering & Sciences, Vol.52, No.2, pp. 125-158, 2009, DOI:10.3970/cmes.2009.052.125

Abstract In this paper finite element approaches for fretting fatigue are proposed on the basis of a non-local model of continuum damage coupled to friction and wear. The model is formulated in the frame-work of a standard material. In a previous paper this was done in the spirit of Maugin, where an extra entropy flux is introduced in the second law in order to include the gradient of the internal variable in a proper manner. In this paper we follow instead the ideas of Frémond and others, where this extra entropy flux is no longer needed, but instead new non-classical balance… More >

Zai You Yan¹

CMES-Computer Modeling in Engineering & Sciences, Vol.13, No.2, pp. 81-90, 2006, DOI:10.3970/cmes.2006.013.081

Abstract Boundary element method in acoustics for Neumann boundary condition problems including sharp edges & corners is investigated. In previous acoustic boundary element method, acoustic pressure and normal velocity are the two variables at sharp edges & corners. However, the normal velocity at sharp edges & corners is discontinuous due to the indefinite normal vector. To avoid the indefinite normal vector and the discontinuous normal velocity at sharp edges & corners, normal vector of elemental node is defined and applied in the numerical implementation. Then the normal velocity is transformed to velocity which is unique even at sharp edges & corners.… More >