Anupam Bhandari^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 557-582, 2019, DOI:10.32604/fdmp.2019.04108

Abstract The present research aims to examine the steady state of the two-dimensional incompressible magnetohydrodynamics (MHD) flow of a micropolar nanofluid over a stretching sheet in the presence of chemical reactions, radiation and viscous dissipation. The effect of particle rotation is taken into account. A conducting fluid passes over a semi-infinite plate with variable temperature while a magnetic field is directed in the transverse direction. Results for velocity, angular momentum, temperature and concentration profiles are obtained for various values of Eckert number, Schmidt number, Prandtl number, thermophosis parameter and Brownian motion parameters. A similarity approach is used to transform the original… More >

Tawfiq Chekifi^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 545-555, 2019, DOI:10.32604/fdmp.2019.01793

Abstract Numerical simulation using Ansys Fluent code is performed, to investigate droplet generation in cross-junction based VOF method. Droplets of water are generated by the shear stress applied by continuous phase (oil), two configurations of cross-junction are suggested; the first is a simple model no modification is performed at the outer channel, while the second model is characterized by a lateral obstacle. we study the effect of velocity ratio, viscous parameter, interfacial tension, flow condition on droplet size and frequency, the effect of lateral obstacles on droplets generation is also focused and analysed. The numerical simulations showed that the velocity ratio… More >

Mengna Liao^1,2, Ruiquan Liao^1,2, Jie Liu^1,2,*, Shuangquan Liu³, Li Li³, Xiuwu Wang^1,2, Yang Cheng^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 527-544, 2019, DOI:10.32604/fdmp.2019.07903

Abstract The ability to predict liquid loading in horizontal gas wells is of great importance for determining the time of drainage and optimizing the related production technology. In the present work, we describe the outcomes of experiments conducted using air-water mixtures in a horizontal well. The results show that the configuration with an inclined section is the most susceptible to liquid loading. Laboratory experiments in an inclined pipe were also conducted to analyze the variation of the critical gas flow rate under different angles, pressure and liquid volume (taking the equal liquid volume at inlet and outlet as the criterion for… More >

D. O. Redchyts¹, E. A. Shkvar^2,*, S. V. Moiseienko³

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 509-525, 2019, DOI:10.32604/fdmp.2019.08266

Abstract A mathematical model for unsteady electro- and aerodynamic processes in the presence of a plasma actuator has been elaborated through physical modeling of the dielectric barrier discharge. A specialized computational fluid dynamics package has been developed accordingly in order to calculate steady and unsteady laminar and turbulent flows. For the numerical simulation of the dielectric barrier discharge, in particular, two equations have been added to the Navier-Stokes equations and solved. They describe the distribution of the applied voltage and the charged particles density. The impact of the plasma actuator on air has been accounted for through the Lorentz force, included… More >

Ivan V. Kazachkov^1,2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 491-507, 2019, DOI:10.32604/fdmp.2019.06477

Abstract Non-classical subjects relating to the dynamics of jet and film flow and related heat transfer processes are considered. These problems, which are relevant to several technological applications, cannot completely be addressed in the frame of the canonical Navier-Stokes equations. The first example deals with the formation of a film flow as a result of the hydraulic shock of a vertical jet impinging on a horizontal plane. The effective thickness of the film resulting from the hydraulic shock is much less than the value obtained using the conventional approach (relying on the assumption of smooth flow), while the corresponding speed is… More >

S . Samantha Kumari^1,*, G. Sankara Sekhar Raju²

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 471-489, 2019, DOI:10.32604/fdmp.2019.04222

Abstract This paper investigates the chemical reaction and thermal radiation effects on unsteady MHD free convective flow past a vertical porous plate in the presence of heat absorption/generation. The novelty of present investigation is that the temperature and concentration of the plate are span wise cosinusoidally unsteady with time. The second order perturbation technique is employed to study the non-linear partial differential equations which govern the fluid flow. The effects of magnetic parameter, radiation, Eckert number, Schmidt number and chemical reaction parameters on velocity, temperature and concentration distributions as well as skin friction coefficients, the rate of heat transfer and the… More >

E. A. Semma¹, M. El Ganaoui², V. Timchenko³, E. Leonardi³

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.3, pp. 191-202, 2006, DOI:10.3970/fdmp.2006.002.191

Abstract This paper deals with the investigation of thermovibrational convection induced by harmonic oscillations of the temperature boundary conditions related to the hot wall in a Bridgman-like (VB) geometrical configurations. Two different models of the VB configuration are considered (a simplified version referred to as "restricted" model and a more realistic and complete model with phase change allowed). The effects of temperature modulation are considered for both models and with regard to several possible initial (basic) states (stationary and oscillatory). In the restricted fluid cavity, we identify the existence of a critical frequency minimizing the flow intensity in the steady basic… More >

T. J. Jaber¹, M. Z. Saghir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.3, pp. 175-190, 2006, DOI:10.3970/fdmp.2006.002.175

Abstract The study deals with three-dimensional numerical simulations of fluid flow and heat transfer under the effect of a rotating magnetic field (RMF) during the growth of Ge_0.98Si_0.02 by the traveling solvent method (TSM). By using a RMF, an attempt is made to suppress buoyancy convection in the Ge_0.98Si_0.02 solution zone in order to get high quality and homogeneity with a flat growth interface. The full steady-state Navier-Stokes equations, as well as the energy, mass transport and continuity equations, are solved numerically using the finite element method. Different magnetic field intensities (B=2, 4, 10, 15 and 22 mT) for different rotational… More >

Yanling Bai^1,*, Feng Liu²

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 307-319, 2019, DOI:10.32604/fdmp.2019.07833

Abstract Levenberg-Marquardt (LM) algorithm is applied for the optimization of the heat transfer of a batch reactor. The validity of the approach is verified through comparison with experimental results. It is found that the mathematical model can properly describe the heat transfer relationships characterizing the considered system, with the error being kept within ±2°C. Indeed, the difference between the actual measured values and the model calculated value curve is within ±1.5°C, which is in agreement with the model assumptions and demonstrates the reliability and effectiveness of the algorithm applied to the batch reactor heat transfer model. Therefore, the present work provides… More >

Cheng Zhang^{1, *}, Mingge Wu¹

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 459-469, 2019, DOI:10.32604/fdmp.2019.08477

Abstract A computational study of the stretching mechanism of a liquid bridge and the effect of the liquid properties on the DPN (dip-pen nanolithography) process is presented. The results show that the viscosity and contact angle can have an appreciable influence on these processes. The greater the viscosity, the harder the liquid bridge is to break, which allows more molecular transfer during the DPN spotting process. Besides, when the contact angle between the liquid and substrate is less than 60 degrees, the time required to stretch the bridge and break it grows with the contact angle. During the stretching process, the… More >