Umut Hanoglu^1,2,*, Božidar Šarler^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09610

Abstract In this research, a rolling simulation system based on a novel meshless solution procedure is upgraded considering casting defects in the material model. The improved model can predict the final stage of the defects after multi-pass rolling. The casted steel billet that enters the rolling mill arrives with casting defects. Those defects may be porosity due to the shrinkage and cavity or micro-cracks near the surface due to hot tearing. In this work, porosity is considered the main defect source since it can easily be determined experimentally. The damage theory develops a damaged stiffness matrix with a scalar damage value.… More >

Qingguo Liu^1,2, Umut Hanoglu^1,2, Božidar Šarler^1,2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09609

Abstract A simulation of reheating furnace in a steel production line where the steel billets are heated from room temperature up to 1200 ˚C, is carried out using a novel meshless solution procedure. The reheating of the steel billets before the continuous hot-rolling process should be employed to dissolve alloying elements as much as possible and redistribute the carbon. In this work, governing equations are solved by the local radial basis function collocation method (LRBFCM) in a strong form with explicit time-stepping. The solution of the diffusion equations for the temperature and carbon concentration fields is formulated on a twodimensional slice.… More >

Rongzhuang Song^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09608

Abstract Kink defects in nanocellulose are ubiquitous yet associated questions remain open regarding the unclear microstructure-mechanical property relationship. Various kink patterns without molecular-scale resolution result in bemusements of how nanocellulose forms different kinks and what the fundamental mechanisms of reversible and irreversible kinks are. In our atomic force microscopy images of mechanically treated cellulose nanofibrils, bent nanofibrils usually exhibit small curvatures while kinked nanofibrils feature sharp bends, in which kinks are conspicuous due to their promiscuous configurations. To identify the nanomechanics of incipient kink defects formed in nanocellulose, molecular dynamics simulations of cellulose nanocrystals (CNCs) under curvature-dependent bending are subsequently carried… More >

Menghui Liang¹, Changjun Zheng^1,*, Yongbin Zhang¹, Chuanxing Bi¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09605

Abstract This paper presents an accurate and efficient indirect boundary element method (IBEM) accelerated by the fast multipole algorithm (FMA)for the design sensitivity analysis of large-scale thin-body acoustic problems above an infinite impedance plane. The non-uniqueness issue of the IBEM in solving exterior acoustic problems is avoided by applying a hybrid combination of single- and double-layer potentials. The half-space impedance Green’s function which involves an image complex line source and is valid for both mass-like and spring-like impedance plane is employed to involve the sound-absorbing effect of the ground surface. Explicit evaluation formulations of the singular boundary integrals are derived and… More >

Hongfei Ye^1,*, Chenguang Yin¹, Jian Wang¹, Yonggang Zheng¹, Hongwu Zhang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09741

Abstract The wetting behavior is ubiquitous in natural phenomenon as well as engineering application. As an intrinsic property of solid surface, the wettability with a controllable gradient has been an attractive issue with a wide application in various fields, including microfluidic devices, self-driven transport, biotechnologies, etc. Generally, it often requires elaborate design of microstructure or its response under the electrical, thermal, optical, pH stimuli, etc. However, the relevant complex underlying mechanism makes it difficult to construct quantitative relations between the wettability and the external field for the fine design. In this work, based on the bilayer two-dimensional materials, a simple controlling… More >

Yinghao Nie¹, Shan Tang^1,*, Gengdong Cheng^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-2, 2023, DOI:10.32604/icces.2023.09603

Abstract Advanced heterogeneous materials are widely used in many fields because of their excellent properties, especially those with hyperelastic properties and significant deformation behavior. Highly efficient numerical prediction methods of nonlinear mechanical properties of heterogeneous material provide essential tools for two-scale material and structural analysis, data-driven material design, and direct application in various engineering fields. Recently, the Clustering-based Reduced Order Model (CROM) methods [1-6] have proven effective in many nonlinear homogenization problems. However, some CROM methods would need help predicting significant large deformation behavior with more than 50% true strain. This presentation introduces the FEM-Cluster based Analysis (FCA: one of the… More >

Haocheng Jiang¹, Jue Zhu^2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-2, 2023, DOI:10.32604/icces.2023.09586

Abstract The tests of dynamic mechanical properties of materials at high temperature and high strain rate has always been a difficult issue [1]. In order to perform the dynamic mechanical properties of G550 cold-formed steel at high temperature and high strain rate, a set of Hopkinson Tension test device which can synchronize with high temperature control is developed for material test [2]. The stress-strain curves obtained from the tests were used to explore the influence of temperature and strain rate on the rheological properties of material by combining micro-analysis. The results show that G550 cold-formed steel has obvious strain rate hardening… More >

Zhiqiang Yang^1,*, Yipeng Rao², Yi Sun¹, Junzhi Cui², Meizhen Xiang^3,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09513

Abstract An effective fracture model is established for the brittle materials with periodic distribution of micro-cracks using the second-order multiscale asymptotic methods. The main features of the model are: (i) the secondorder strain gradient included in the fracture criterions and (ii) the strain energy and the Griffith criterions for micro-crack extensions established by the multiscale asymptotic expansions. Finally, the accuracy of the presented model is verified by the experiment data and some typical fracture problems. These results illustrate that the second-order fracture model is effective for analyzing the brittle materials with periodic distribution of micro-cracks. More >

Xiaowei Gao^1,*, Huayu Liu¹, Weilong Fan¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09510

Abstract In this paper, a novel numerical method, Zonal Free Element Method (ZFLM), is proposed and used to solve thermal-mechanical problems composed of multiple and functionally graded materials. ZFLM is a collocation method, in which two or three lines in 2D or 3D problems, called as line-set, are used at each node to establish the solution scheme solving engineering problems governed by partial differential equations. In ZFLM, the Lagrange polynomial is adopted to approximate physical variables varying over each line of the line-set. The first-order partial derivative is derived by using a directional derivative technique along arclength of a line, and… More >

Pandi Zhao¹, Zebang Zheng^1,*, Mei Zhan¹, Hongwei Li¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09508

Abstract Metallic sealing rings made from nickel-based superalloys are critical components of aero engines that prevent the leakage of high-pressure liquid or gas fuel. As one of the main failure modes, fatigue cracking has been a concern for the aerospace industries because the formation of even a micro-crack may cause an aviation accident. For the purpose of manufacturing fatigue-resisting sealing rings, much effort has been spent on the lifetime predicting under fatigue loadings. However, the fatigue analysis of metallic sealing rings is challenging due to several aspects. On the one hand, the diameter of the rings (>100mm) is orders of magnitude… More >