Yong Zhang^1,*, Jie Wang^2,3

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09368

Abstract Ferroelectric materials have been widely used in various electromechanical devices such as sensors, actuators, transducers and energy storage devices due to their distinguished electromechanical coupling properties. Ferroelectric materials usually bear large mechanical loads and high electric fields in order to give full play to their potential. The interaction between fracture and dielectric breakdown is able to occur since the filler inside a crack will change the dielectric behaviors around it and dielectric breakdown can change the local mechanical properties of dielectric materials because of its weakening of chemical bonds. Therefore, a comprehensive and in-depth understanding of the fracture and dielectric… More >

Dongze Yan¹, Jianxiang Wang², Lihua Shao^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-2, 2023, DOI:10.32604/icces.2023.09357

Abstract Non-uniform strains produce a localized break in the microscopic inverse symmetry of materials, which leads to the electromechanical coupling phenomenon known as flexoelectricity in all dielectric materials. However, the size-dependent flexoelectric effect typically only manifests at small scales. Creating a considerable flexoelectric output at the macroscopic scale remains a bottleneck. Micro- and nano-porous materials own a significant number of randomly distributed microscopic pores and ligamentous structures, which can deform non-uniformly under arbitrary forms of macroscopic loading. Moreover, since the small size effect of flexoelectricity, the entire flexoelectricity of the micro- and nano-porous materials will be much more significant than that… More >

Linjuan Wang^1,*, Jianxiang Wang²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09355

Abstract The prediction of overall dynamics of composite materials has been an intriguing research topic more than a century, and numerous approaches have been developed for this topic. One of the most successful representatives is the classical micromechanical models which assume that the behavior of a composite is the same as its constituents except for the difference in mechanical properties, e.g., effective moduli. With the development of advanced composite materials in recent years, especially metamaterials, it is found that the classical micromechanical models cannot describe complex dynamic responses of composites such as the dispersion and bandgaps of elastic waves. Thus, some… More >

Leilei Chen^2,3, Haozhi Li^3,4, Lu Meng⁵, Pan Chen³, Pei Li^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-2, 2023, DOI:10.32604/icces.2023.010584

Abstract In this paper, a Direct FE² method is proposed to simulate the electromechanical coupling problem of inhomogeneous materials. The theoretical foundation for the proposed method, downscaling and upscaling principles, is the same as that of the FE² method. The two-level simulation in the Direct FE² method may be addressed in an integrative framework where macroscopic and microscopic degrees of freedom (DOFs) are related by multipoint constraints (MPCs) [1]. This critical characteristic permits simple implementation in commercial FE software, eliminating the necessity for recurrent data transfer between two scales [2-4]. The capabilities of Direct FE² are validated using four numerical examples,… More >

Lei Yang¹, Guangyan Huang^1,2,*, Tao Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-2, 2023, DOI:10.32604/icces.2023.09759

Abstract In order to evaluate the blast mitigation effect of polyurethane foam in cylindrical explosion containment vessels (CECVs), a three-dimensional numerical simulation model was established. The Structured Arbitrary Lagrange-Euler (S-ALE) algorithm was applied in current simulations to define the coupling contact between TNT and Lagrange algorithm. The numerical model was verified by comparing the dynamic deformation and permanent deformation of the experiments. Based on the numerical simulation model after verification, the influence of polyurethane foam filling inside CECVs on the mitigation effect was investigated. The results revealed that compared with the ALE algorithm, the numerical simulations based on the S-ALE algorithm… More >

Mengnan Zhang^1,*, Fucheng Tian¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09593

Abstract Peridynamic is a nonlocal theory that uses integral forms of governing equations, making it suitable for describing objects with discontinuous states such as cracks. After more than two decades of development, peridynamic has been effectively applied to numerous solid mechanics studies. However, in the field of ordinary state-based peridynamic modeling nonlinear deformation, a more comprehensive model that can establish a general connection with continuum mechanics and allow for the selection of different influence functions is still lacking. As a consequence, a further extension to existing models is promising, and it represents a substantial addition to the current peridynamic model. In… More >

Mengshuai Chen^1,2, Karim Ragui¹, Lin Chen^1,2,3,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-2, 2023, DOI:10.32604/icces.2023.09526

Abstract With the development of supercritical fluid technology, supercritical CO₂ has great applications in carbon sequestration, soil remediation, recovery of petroleum gas, material extraction in industrial processes, and product pure drug nanoparticles/nanocrystals. In these applications, the flow and heat transfer, phase change of sCO₂ in porous media are involved. Combined with the previous research methods, we establish a three-dimensional microchannel chip porous media model. Using the numerical simulation method, we study the flow and heat transfer characteristics of sCO₂ in the microchannel chip porous media under different working conditions. The temperature, pressure and density distribution are obtained under different working conditions.… More >

Nizar Faisal Alkayem¹, Maosen Cao^2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09367

Abstract Structural damage identification is a key engineering technique that attempts to ensure structural reliability. In this regard, one of the major intelligent approaches is the inverse analysis of structural damage using metaheuristics. By considering the recent achievements, an efficient hybrid objective function that combines the modal kinetic energy and modal strain energy is developed. The objective function aims to extract maximum modal information from the structure and overcome noisy conditions. Moreover, the original methods are usually vulnerable to the associated high multimodality and uncertainty of the inverse problem. Therefore, the particle swarm algorithm (PSO) mechanism is combined with another newly… More >

Xiang Li¹, Guangyan Huang^1,2,*, Zhiwei Guo^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-3, 2023, DOI:10.32604/icces.2023.09269

Abstract SPH method is widely used to study the dynamic response of metal casing under explosive loading because of its superiority in simulating metal fracture phenomenon [1-3]. The distribution of the fragment from uncoupled charge structures with segmental shaped explosive were studied. The X-ray photographic images of fragmentation obtained from explosion experiment were compared with the numerical results based on SPH method and Lagrange method. The fragmentation shows that the numerical results based on the Lagrange method are in good agreement with the experimental results while some errors appear in results based on SPH method. The velocity of the fragments at… More >

Zhengmao Yang^1,*, Junjie Yang², Yang Chen³, Fulei Jing⁴

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09229

Abstract Woven ceramic matrix composites (CMCs), exhibiting excellent thermomechanical properties at high temperatures, are promising as alternative materials to the conventional nickel-based superalloys in the hot section components of aero-engines. Therefore, understanding and predicting the lifetime of CMCs is critical. Fatigue prediction of woven CMCs currently involves long-term and costly testing. A feasible alternative is to use predictive modelling based on a deep understanding of the damage mechanisms. Therefore, this study develops a multiscale analysis modelling method for predicting the fatigue life of CMC materials at high temperature by investigating the thermomechanical fatigue damage evolution. To represent the global thermomechanical properties… More >