Liangjian Lei^1,2, Yihang Lu^1,2,*

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 2109-2126, 2025, DOI:10.32604/fhmt.2025.072643 - 31 December 2025

Abstract Internal thermal mass, such as furniture and partitions, plays a crucial role in enhancing building energy efficiency and indoor thermal comfort by passively regulating temperature fluctuations. However, the irregular geometry of these elements poses a significant challenge for accurate modeling in building energy simulations. This study addresses this gap by developing a rigorous analytical model that idealizes internal thermal mass as a sphere, thereby capturing multi-directional heat conduction effects that are neglected in simpler one-dimensional slab models. The transient heat conduction within the sphere is solved analytically using Duhamel’s theorem for three representative indoor air… More >

Jinyou Qiu^1,2, Jiale Liu^1,2, Yubing Li^1,2,*, Shaogeng Zhong³, Guilong Dai^1,2, Wenhua Liu⁴

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 2025-2049, 2025, DOI:10.32604/fhmt.2025.072260 - 31 December 2025

Abstract The growing demand for energy-saving and renewable heating solutions has made photovoltaic/thermal (PV/T) heat pump systems a promising technology. However, their thermal and electrical performance, as well as the overall utilization of solar energy, strongly depend on capacity configuration and operating parameters. To address this issue, this study proposes a PV/T heat pump system featuring a novel rhombic flow channel structure that functions as the collector-evaporator. An experimental test bench was established to evaluate system performance, and a one-dimensional numerical model was developed to investigate the effects of environmental and operating parameters. The simulation results… More > Graphic Abstract

Shengzhong Zhao¹, Daiyan Chen¹, Han Zhang^1,2,*, Junhao Yu¹, Lin Xu¹, Zhaoyi Zhuang¹, Fei Wang^1,*

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1907-1932, 2025, DOI:10.32604/fhmt.2025.071910 - 31 December 2025

Abstract A sealed portal could significantly alter the flame shape and smoke flow characteristics in inclined tunnel fires. In inclined tunnels, two typical sealing conditions could be defined, namely the upper portal sealed and the lower portal sealed. In this study, the effects of tunnel slope on flame shape, flame length, along with smoke mass flow rate and induced velocity at the tunnel portal, are numerically investigated. The results show that, in all scenarios, flames initially rise vertically but tilt toward the sealed portal during the quasi-steady stage, with the largest tilt angle observed in tunnels… More >

Lei Wang¹, Hongyang Zhou², Xiaofan Liu³, Junkun Mu², Jinpeng Bi², Youkang Jin², Juan Ge², Yuexia Lv^2,4,*

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1811-1832, 2025, DOI:10.32604/fhmt.2025.071222 - 31 December 2025

Abstract Membrane gas absorption and solar-assisted absorbent regeneration offer a sustainable approach to reduce the energy penalty of post-combustion CO₂ capture. This study introduces a novel system integrating solar thermal energy with membrane gas absorption to capture CO₂ from a 580 MWe pulverized coal power plant. The environmental impacts across six scenarios at varying solar fractions are evaluated via life cycle assessment. Results show a 7.61%–13.04% reduction in global warming potential compared to a steam-driven CO₂ capture system. Electricity and steam consumption dominate the operational phase, contributing 15%–64% and 18%–61% to environmental impacts in non-TES scenarios, respectively. While More >

Yang Liu¹, Biao Chen¹, Xin Liu², Chenxi Luo², Shihui Xiao^2,*

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 2127-2146, 2025, DOI:10.32604/fhmt.2025.070973 - 31 December 2025

Abstract This study evaluated corn kernel drying performance and quality changes using hot air drying (HAD) and infrared drying (ID) across temperatures ranging from 55°C to 80°C. Optimal drying parameters were determined by using the entropy weight method, with drying time, specific energy consumption, damage rate, fatty acids, starch, polyphenols, and flavonoids as indicators. Results demonstrated that ID significantly outperformed HAD, achieving drying times up to 20% shorter and reducing specific energy consumption and kernel damage by up to 79.3% and 66.7%, respectively, while also better preserving quality attributes. Both methods exhibited drying profiles characterized by More >

Xiaolong Li, Hui Chen, Yingwen Liu, Peng Yang^*

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1767-1788, 2025, DOI:10.32604/fhmt.2025.070537 - 31 December 2025

Abstract Hazardous gas intrusion in tightly sealed and geometrically complex confined spaces, such as armored tanks, poses a critical threat to occupant health. The intricate internal structure of these systems may lead to non-intuitive pollutant transport pathways. However, the spatial and temporal evolution of these structures, as well as the intrinsic mechanisms of the purification systems, remain poorly elucidated. In this study, a high-fidelity, transient three-dimensional computational fluid dynamics (CFD) model was developed to simulate the leakage and dispersion of carbon monoxide (CO) and nitrogen dioxide (NO₂) using the RNG k-ε turbulence model. Scenarios with and without… More > Graphic Abstract

Ke Shen^1,2,*, Dan Zeng^1,2, Changhao Wang¹, Lei Wang¹, Yuliang Dong¹

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1957-1980, 2025, DOI:10.32604/fhmt.2025.070396 - 31 December 2025

Abstract Ice accretion on aircraft poses a critical threat to flight safety by significantly altering aerodynamic performance. This study presents a novel numerical framework for ice accretion prediction, developed by extending the Myers model and incorporating an advanced multi-step approach. The proposed framework integrates ice layer growth into the modeling of unsteady water film dynamics and introduces a revised criterion for determining the icing condition. A multi-step scheme, accounting for the continuous variation of physical parameters, is implemented to enhance computational accuracy. The framework is validated through simulations on both 2D and 3D configurations. For the… More > Graphic Abstract

Pu Liu, Guangwei Bai^*, Wei Li, Chuanhua Ge

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1847-1864, 2025, DOI:10.32604/fhmt.2025.070378 - 31 December 2025

Abstract To address the issue of uneven temperature distribution in shale gas oil-based drill cuttings pyrolysis furnaces, a numerical model was developed using Fluent software. The effects of nitrogen flow rate, heating tube spacing, and furnace dimensions on the internal temperature field were thoroughly analyzed from a mechanistic perspective. The results indicated that non-uniform radiation from the heating tubes and flow disturbances induced by the nitrogen stream were the primary causes of localized heat concentration. Under no-load conditions, the maximum deviation between simulated and on-site measured temperatures was 1.5%, validating the model’s accuracy. Furthermore, this study More >

Weifang Yang¹, Yaping Liu^1,*, Chao Gui¹, Yangyu Shi², Mengyi Ge¹

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 2051-2072, 2025, DOI:10.32604/fhmt.2025.070138 - 31 December 2025

Abstract This study experimentally investigates the operational performance of a scroll compressor using R513A to expand its application range as a substitute for R134a. A vapor compression heat pump test platform was established to analyze the variation trends of heating capacity, refrigerant mass flow rate, compressor power consumption, and current by controlling the compressor inlet and outlet pressures (i.e., evaporating and condensing temperatures). The results indicate that both heating capacity and refrigerant mass flow rate decrease with increasing pressure ratio. Compressor power consumption and current initially increase and then decrease with rising evaporating temperature, whereas they… More > Graphic Abstract

Ghinwa Al Mimar¹, Natrah Kamaruzaman^1,*, Kamil Talib Alkhateeb²

Frontiers in Heat and Mass Transfer, Vol.23, No.6, pp. 1933-1956, 2025, DOI:10.32604/fhmt.2025.070118 - 31 December 2025

Abstract The pivotal role microchannels play in the thermal management of electronic components has, in recent decades, prompted extensive research into methods for enhancing their heat transfer performance. Among these methods, surface wettability modification was found to be highly effective owing to its significant influence on boiling dynamics and heat transfer mechanisms. In this study, we modified surface wettability using a nanocomposite coating composed of graphene nano plate (GNPs) and multi-walled carbon nanotubes (MWCNT) and then examined how the modification affected the transfer of boiling heat in microchannels. The resultant heat transfer coefficients for hydrophilic and… More >