Maha L. Shrestha^{1, 2,*}, Mihail Ionescu¹, Xianmei Wan¹, Zoran S. Petrović¹

Journal of Renewable Materials, Vol.6, No.5, pp. 504-516, 2018, DOI:10.7569/JRM.2017.634187

Abstract Biobased aromatic-aliphatic polyols were previously synthesized from a thermal thiol-ene reaction of propoxylated cardanol with 2-mercaptoethanol (ME) in the presence of azobisisobutyronitrile (AIBN) as a radical initiator. Cardanol used for this purpose was obtained as a dark-brown liquid (Gardner Color Reference ∼18). The photochemical thiol-ene reaction can also be used to prepare aromatic-aliphatic polyols by employing cardanol. Via the photochemical thiol-ene reaction, 2-mercaptoethanol was added successfully to C=C double bond of cardanol, suggesting that phenolic group may not play an inhibitory role in the radical thiol-ene reaction. However, we preferred to alkoxylate the phenolic hydroxyl group of cardanol, which is… More >

Andrea Dorigato^1,*, Martino Negri², Alessandro Pegoretti^1,*

Journal of Renewable Materials, Vol.6, No.5, pp. 493-503, 2018, DOI:10.7569/JRM.2017.634177

Abstract Novel fully biodegradable thermoplastic composite laminates reinforced with ultrathin wood laminae were prepared through a hot-pressing process by using two different thermoplastic starch (TPS) matrices. The microstructure and physical properties of the resulting unidirectional and bidirectional laminates were studied. The investigated materials presented a complex microstructure, in which the porosity of the wood laminae was almost entirely occluded by the polymer matrix. The mechanical behavior of the laminates was strongly affected by the obtained microstructure, and matrix penetration in wood pores led to biodegradable composites with elastic modulus and tensile strength higher than those of their constituents. Finally, thermal welding… More >

A. Atiqah¹, M. Jawaid^1,*, S. M. Sapuan^1,2, M. R. Ishak³

Journal of Renewable Materials, Vol.6, No.5, pp. 477-492, 2018, DOI:10.7569/JRM.2017.634188

Abstract The aim of the present study was to develop sugar palm fiber (SPF) reinforced thermoplastic polyurethane (TPU) composites and to investigate the effects of fiber surface modification by 2% silane treatment and fiber loading (0, 10, 20, 30, 40 and 50 wt%) on the mechanical and thermal properties of the obtained composites. Surface treatment was employed to improve the fiber-matrix interface, which was expected to boost the mechanical strength of the composites, in terms of tensile, flexural and impact properties. Thermal properties were also investigated by thermal gravimetric analysis (TGA) and dynamic mechanical analysis (DMA) to assess the thermal stability… More >

Min Fan^1,2,3*, Qiaoling Hu⁴

Journal of Renewable Materials, Vol.6, No.5, pp. 457-463, 2018, DOI:10.7569/JRM.2017.634178

Abstract The absorption behavior of chitosan in alkaline solution by freeze-blasting was studied. The influence of alkaline type, concentration, and small molecules was investigated, as well as the different roles of LiOH and NaOH in the absorption. Chitosan reached its maximum absorption rate when LiOH concentration was 4.8 wt% and NaOH 4.0 wt%, respectively. Chitosan showed better absorption capacity in LiOH solution. Urea could improve the absorption when its concentration was more than or equal to 4.0 wt%, and the improvement was greater in NaOH solution. Thiourea showed no obvious effect in LiOH solution, but showed an effect when NaOH concentration… More >

Haiyang Zhang^1,*, Qian He¹, Xiaoning Lu¹, A. Pizzi^2,3, Changtong Mei¹, Xianxu Zhan⁴

Journal of Renewable Materials, Vol.6, No.5, pp. 450-456, 2018, DOI:10.7569/JRM.2017.634180

Abstract Double cantilever beam tests were used to measure the energy release rates of linear vibrational welded moso bamboo joints. The influence of the length of the preserved cracks, the different combinations of the inner and outer bamboo surfaces and the moisture content is studied herein. The experimental compliance method, which is based on linear elastic fracture mechanics and has been shown to be an ideal method, was used to analyze data with the power equation. The results show that the preserved initial crack length does not have a significant effect on the final measured energy release rate, while the moso… More >

Kunal Wazarkar, Anagha Sabnis*

Journal of Renewable Materials, Vol.6, No.4, pp. 438-449, 2018, DOI:10.7569/JRM.2017.634159

Abstract The research work presented in this article deals with the synthesis of cardanol-based polyol and its curing with hexabutoxymethyl melamine (HBMM) for application in coatings. Cardanol-based polyol was prepared via thiol-ene click reaction using thioglycerol. Unsaturation present in the long chain of cardanol was successfully utilized to synthesize polyol via thiol-ene coupling. The reaction was carried out between cardanol and thioglycerol in the presence of Irgacure 184 (photoinitiator) and 1,8-Diazabicyclo[5.4.0]undec-7-ene (catalyst) under UV light for 12 h at 80 °C. After completion of the reaction, one mole of thioglycerol was successfully added across the double bond of a fatty chain… More >

S. Michałowski¹, M. A. Mosiewicki^2*, M. Kuran´ska¹, M. I. Aranguren², A. Prociak¹

Journal of Renewable Materials, Vol.6, No.4, pp. 426-437, 2018, DOI:10.7569/JRM.2017.634163

Abstract Elastomeric polyurethanes were prepared from a reference polyurethane system modified with biobased polyols synthesized using rapeseed or palm oils. The reference material was modified by replacement of the commercial polyol by 10% of biopolyols and also by addition of sisal fibers up to 5 wt%. The higher functionality of the biopolyols increased the crosslinking density of the networks and this was reflected by an increase in hardness and a decrease in water absorption. The effect of the sisal fibers mainly improved the mechanical and thermomechanical properties of the system with rapeseed oil because of good dispersion and strong fiber-matrix interaction.… More >

F.J. Santiago-Medina¹, M.C. Basso¹, A. Pizzi^1,2,*, L. Delmotte³

Journal of Renewable Materials, Vol.6, No.4, pp. 413-425, 2018, DOI:10.7569/JRM.2017.634172

Abstract The reaction of a desulphurized kraft lignin with hexamethylene diamine and dimethyl carbonate has allowed the development of isocyanate-free polyurethane resins. The present research work is based on previous studies made with hydrolyzable and condensed tannins, but takes advantage of the higher number of hydroxyl groups present in lignin and their different aliphatic and aromatic character. The obtained materials were analyzed by Fourier transform infrared (FTIR) spectroscopy, matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry and solid-state cross-polarization/magic angle spinning (CP MAS) 13 C nuclear magnetic resonance (NMR), which have revealed the presence of urethane functions. The interpretation of the… More >

Nikolay Dishovsky^1*, Petrunka Malinova¹, Ivan Uzunov²

Journal of Renewable Materials, Vol.6, No.4, pp. 402-412, 2018, DOI:10.7569/JRM.2017.634171

Abstract Natural products from agricultural wastes are finding importance in the polymer industry due to their many advantages such as being lightweight, low cost and environmentally friendly. In the present study the potential of the two types of rice husk ash (RHA) prepared under different conditions as fillers in natural rubber-based elastomer composites was investigated. The fillers were prepared by rice husks incineration and characterized by means of X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) specific surface area, Hg-porosimetry and N2-adsorption. The evaluation involved determining the vulcanization characteristics of the compounds and their… More >

Ragab E. Abou-Zeid^1*, Mohamed A. Diab¹, Salah A. A. Mohamed², Ahmed Salama¹, Hind Abdullah Aljohani³, Kamel Rizq Shoueir⁴

Journal of Renewable Materials, Vol.6, No.4, pp. 394-401, 2018, DOI:10.7569/JRM.2017.634156

Abstract The current article addresses a new strategy for the preparation of polylactic acid/cellulose nanocrystal (PLA/CNCs) nanobiocomposite films with improved structural morphology, mechanical and barrier properties for food packaging applications. The addition of hexadecyltrimethylammonium bromide (CTAB) and sodium lauryl sulfate (SLS) as cationic and anionic surfactants respectively, was found to play a crucial role in preventing re-aggregation of the CNCs during drying and improving the dispersion of CNCs in the PLA. The coated paper was characterized using mechanical tests, water vapor permeability (WVP), X-ray diffraction (XRD), scanning electron microscopy (SEM) and air permeability. The results showed that the paper coated with… More >