Letao Gao^1,*, Xiaoming Wang², Tao Wang³, Mengyu Chang⁴

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 4741-4754, 2022, DOI:10.32604/cmc.2022.027204

Abstract In the research field of bearing fault diagnosis, classical deep learning models have the problems of too many parameters and high computing cost. In addition, the classical deep learning models are not effective in the scenario of small data. In recent years, deep forest is proposed, which has less hyper parameters and adaptive depth of deep model. In addition, weighted deep forest (WDF) is proposed to further improve deep forest by assigning weights for decisions trees based on the accuracy of each decision tree. In this paper, weighted deep forest model-based bearing fault diagnosis method (WDBM) is proposed. The WDBM… More >

Wei Fang^1,2,*, Liang Shen¹, Victor S. Sheng³, Qiongying Xue¹

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 4867-4877, 2022, DOI:10.32604/cmc.2022.027197

Abstract Precipitation nowcasting is of great significance for severe convective weather warnings. Radar echo extrapolation is a commonly used precipitation nowcasting method. However, the traditional radar echo extrapolation methods are encountered with the dilemma of low prediction accuracy and extrapolation ambiguity. The reason is that those methods cannot retain important long-term information and fail to capture short-term motion information from the long-range data stream. In order to solve the above problems, we select the spatiotemporal long short-term memory (ST-LSTM) as the recurrent unit of the model and integrate the 3D convolution operation in it to strengthen the model's ability to capture… More >

S. Vinson Joshua¹, A. Selwin Mich Priyadharson¹, Raju Kannadasan², Arfat Ahmad Khan³, Worawat Lawanont^3,*, Faizan Ahmed Khan⁴, Ateeq Ur Rehman⁵, Muhammad Junaid Ali⁶

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5663-5679, 2022, DOI:10.32604/cmc.2022.027178

Abstract The exponential growth of population in developing countries like India should focus on innovative technologies in the Agricultural process to meet the future crisis. One of the vital tasks is the crop yield prediction at its early stage; because it forms one of the most challenging tasks in precision agriculture as it demands a deep understanding of the growth pattern with the highly nonlinear parameters. Environmental parameters like rainfall, temperature, humidity, and management practices like fertilizers, pesticides, irrigation are very dynamic in approach and vary from field to field. In the proposed work, the data were collected from paddy fields… More >

Juan Fang^1,*, Yunfei Mao¹, Min Cai¹, Li’ang Zhao¹, Huijie Chen¹, Wei Xiang^2,3

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5531-5545, 2022, DOI:10.32604/cmc.2022.027177

Abstract Since the three-dimensional Network on Chip (3D NoC) uses through-silicon via technology to connect the chips, each silicon layer is conducted through heterogeneous thermal, and 3D NoC system suffers from thermal problems. To alleviate the seriousness of the thermal problem, the distribution of data packets usually relies on traffic information or historical temperature information. However, thermal problems in 3D NoC cannot be solved only based on traffic or temperature information. Therefore, we propose a Score-Based Traffic- and Thermal-Aware Adaptive Routing (STTAR) that applies traffic load and temperature information to routing. First, the STTAR dynamically adjusts the input and output buffer… More >

He Gong^1,3,4, Lin Chen¹, Haohong Pan¹, Shijun Li^2,5, Yin Guo¹, Lili Fu¹, Tianli Hu^1,3,4,*, Ye Mu^1,3, Thobela Louis Tyasi⁶

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 6015-6027, 2022, DOI:10.32604/cmc.2022.027160

Abstract The scale of deer breeding has gradually increased in recent years and better information management is necessary, which requires the identification of individual deer. In this paper, a deer face dataset is produced using face images obtained from different angles, and an improved residual neural network (ResNet)-based recognition model is proposed to extract the features of deer faces, which have high similarity. The model is based on ResNet-50, which reduces the depth of the model, and the network depth is only 29 layers; the model connects Squeeze-and-Excitation (SE) modules at each of the four layers where the channel changes to… More >

Hanguang Luo¹, Tao Zou^1,*, Chunming Wu², Dan Li³, Shunbin Li¹, Chu Chu⁴

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5031-5040, 2022, DOI:10.32604/cmc.2022.027118

Abstract In the emerging Industrial Internet of Things (IIoT), authentication problems have become an urgent issue for massive resource-constrained devices because traditional costly security mechanisms are not suitable for them. The security protocol designed for resource-constrained systems should not only be secure but also efficient in terms of usage of energy, storage, and processing. Although recently many lightweight schemes have been proposed, to the best of our knowledge, they are unable to address the problem of privacy preservation with the resistance of Denial of Service (DoS) attacks in a practical way. In this paper, we propose a lightweight authentication protocol based… More >

Yassir Edrees Almalki1¹, Ahmad Shaf², Tariq Ali², Muhammad Aamir², Sharifa Khalid Alduraibi³, Shoayea Mohessen Almutiri⁴, Muhammad Irfan⁵, Mohammad Abd Alkhalik Basha⁶, Alaa Khalid Alduraibi³, Abdulrahman Manaa Alamri⁷, Muhammad Zeeshan Azam⁸, Khalaf Alshamrani^9,*, Hassan A. Alshamrani⁹

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 4833-4851, 2022, DOI:10.32604/cmc.2022.027111

Abstract Breast cancer (BC) is the most common cause of women’s deaths worldwide. The mammography technique is the most important modality for the detection of BC. To detect abnormalities in mammographic images, the Breast Imaging Reporting and Data System (BI-RADs) is used as a baseline. The correct allocation of BI-RADs categories for mammographic images is always an interesting task, even for specialists. In this work, to detect and classify the mammogram images in BI-RADs, a novel hybrid model is presented using a convolutional neural network (CNN) with the integration of a support vector machine (SVM). The dataset used in this research… More >

Yanhua Lu¹, Xuehui Gong^2,*, Andrew Byron Kipnis³

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5481-5497, 2022, DOI:10.32604/cmc.2022.027089

Abstract Combined with the energy consumption data of individual buildings in the logistics group of Yangtze University, the analysis model scheme of energy consumption of individual buildings in the university is studied by using Back Propagation (BP) neural network to solve nonlinear problems and have the ability of global approximation and generalization. By analyzing the influence of different uses, different building surfaces and different energy-saving schemes on the change of building energy consumption, the grey correlation method is used to determine the main influencing factors affecting each building energy consumption, including uses, building surfaces and energy-saving schemes, which are used as… More >

Tao Zhang^1,*, Yi Cao²

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5315-5325, 2022, DOI:10.32604/cmc.2022.027083

Abstract The three-dimensional (3D) reconstruction technology based on structured light has been widely used in the field of industrial measurement due to its many advantages. Aiming at the problems of high mismatch rate and poor real-time performance caused by factors such as system jitter and noise, a lightweight stripe image feature extraction algorithm based on You Only Look Once v4 (YOLOv4) network is proposed. First, Mobilenetv3 is used as the backbone network to effectively extract features, and then the Mish activation function and Complete Intersection over Union (CIoU) loss function are used to calculate the improved target frame regression loss, which… More >

Tao Zhang¹, Shaokui Gu¹, Jinxing Niu^1,*, Yi Cao²

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 4603-4614, 2022, DOI:10.32604/cmc.2022.027079

Abstract Traditional three-dimensional (3D) image reconstruction method, which highly dependent on the environment and has poor reconstruction effect, is easy to lead to mismatch and poor real-time performance. The accuracy of feature extraction from multiple images affects the reliability and real-time performance of 3D reconstruction technology. To solve the problem, a multi-view image 3D reconstruction algorithm based on self-encoding convolutional neural network is proposed in this paper. The algorithm first extracts the feature information of multiple two-dimensional (2D) images based on scale and rotation invariance parameters of Scale-invariant feature transform (SIFT) operator. Secondly, self-encoding learning neural network is introduced into the… More >