NEETU TRIPATHI, DIBYENDU S. BAG^*, MAYANK DWIVEDI

Journal of Polymer Materials, Vol.40, No.3-4, pp. 227-269, 2023, DOI:10.32381/JPM.2023.40.3-4.8

Abstract Over the last three decades, there has been considerable interest in the captivating mechanical properties displayed by auxetic materials, highlighting the advantages stemming from their distinct negative Poisson's ratio. The negative Poisson's ratio observed in auxetic polymeric materials is a result of the distinctive geometries of their unit cells. These unit cells, encompassing structures such as chiral, re-entrant, and rotating rigid configurations, are carefully engineered to collectively generate the desired auxetic behaviour. This comprehensive review article explores the field of auxetic polymeric materials, offering a detailed exploration of their geometries, fabrication methods, mechanical properties, and characterisation. The diverse applications of… More >

K. KRISHNAMOORTHY^a,*, N. PRABHU^b

Journal of Polymer Materials, Vol.40, No.3-4, pp. 215-226, 2023, DOI:10.32381/JPM.2023.40.3-4.7

Abstract The acoustic emission monitoring with artificial neural networks predicts the ultimate strength of glass/epoxy composite laminates using Acoustic Emission Data. The ultimate loads of all the specimens were used to characterise the emission of hits during failure modes. The six layered glass fiber laminates were prepared (in woven mat form) with epoxy as the binding medium by hand lay-up technique. At room temperature, with a pressure of 30 kg/cm², the laminates were cured. The laminates of standard dimensions as per ASTM D3039 for the tensile test were cut from the lamina. The Acoustic Emission (AE) test was conducted on these… More >

Ran Wang¹, Aimin Gong^1,*, Shanqing Shao¹, Baoli Qu², Jing Xu³, Fulai Wang¹, Feipeng Liu^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 749-769, 2024, DOI:10.32604/fdmp.2023.042566

Abstract The mechanical properties of cementitious sand and gravel damming material have been experimentally determined by means of microscopic SEM (Scanning Electron Microscopy) image analysis. The results show that the combination of fly ash and water can fill the voids in cemented sand and gravel test blocks because of the presence of hydrated calcium silicate and other substances; thereby, the compactness and mechanical properties of these materials can be greatly improved. For every 10 kg/m³ increase in the amount of cementitious material, the density increases by about 2%, and the water content decreases by 0.2%. The amount of cementitious material used… More > Graphic Abstract

Shuai Chen¹, Yinwei Ma², Zhongshu Wang², Zongmei Xu³, Song Zhang¹, Jianle Li¹, Hao Xu¹, Zhanjun Wu^1,*

Structural Durability & Health Monitoring, Vol.18, No.2, pp. 125-141, 2024, DOI:10.32604/sdhm.2024.042594

Abstract The safety and integrity requirements of aerospace composite structures necessitate real-time health monitoring throughout their service life. To this end, distributed optical fiber sensors utilizing back Rayleigh scattering have been extensively deployed in structural health monitoring due to their advantages, such as lightweight and ease of embedding. However, identifying the precise location of damage from the optical fiber signals remains a critical challenge. In this paper, a novel approach which namely Modified Sliding Window Principal Component Analysis (MSWPCA) was proposed to facilitate automatic damage identification and localization via distributed optical fiber sensors. The proposed method is able to extract signal… More > Graphic Abstract

Morteza Eslamian^*

Frontiers in Heat and Mass Transfer, Vol.2, No.4, pp. 1-20, 2011, DOI:10.5098/hmt.v2.4.3001

Abstract Recent advances in thermodiffusion (Soret effect) in binary and higher multicomponent liquid mixtures are reviewed. The mixtures studied include the hydrocarbon, associating, molten metal and semiconductor, polymer, and DNA mixtures. The emphasis is placed on the theoretical works, particularly models based on the nonequilibrium thermodynamics, although other approaches such as the statistical, kinetic and hydrodynamic approaches are discussed as well. For each mixture, the major theoretical and experimental works are discussed and the research trends and challenges are addressed. Some of the challenges include a need for combining various methods to develop a comprehensive theoretical model or at least to… More >

J.N. Chung^a,†, Tailian Chen^b, Shalabh C. Maroo^c

Frontiers in Heat and Mass Transfer, Vol.2, No.2, pp. 1-19, 2011, DOI:10.5098/hmt.v2.2.3004

Abstract Recent research progress in the area of nano/micro scale nucleate boiling is reviewed and an up-to-date summary is provided with a focus on the advances of fundamental boiling physics. This review examines nano/micro scale pool boiling experimental and theoretical/numerical work reported in the open literature. On the experimental side, the topics covered are moving contact line, critical heat flux, boiling curve, nucleation, single bubble boiling cycle, bubble coalescence boiling cycle, heater size effect, nanofluid, and nanoscale-structured heater surface. For the theoretical/numerical work, continuum mechanics modeling of the micro-region and molecular dynamics modeling of the nano-region are included. More >

Xinci Zhou, Jin Zhu^*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 2705-2727, 2024, DOI:10.32604/cmes.2024.046363

Abstract As the number of automated guided vehicles (AGVs) within automated container terminals (ACT) continues to rise, conflicts have become more frequent. Addressing point and edge conflicts of AGVs, a multi-AGV conflict-free path planning model has been formulated to minimize the total path length of AGVs between shore bridges and yards. For larger terminal maps and complex environments, the grid method is employed to model AGVs’ road networks. An improved bounded conflict-based search (IBCBS) algorithm tailored to ACT is proposed, leveraging the binary tree principle to resolve conflicts and employing focal search to expand the search range. Comparative experiments involving 60… More >

Ming Liu¹, Pinghua Zhu^2,*, Xiancui Yan², Haichao Li², Xintong Chen²

Journal of Renewable Materials, Vol.12, No.2, pp. 329-347, 2024, DOI:10.32604/jrm.2023.045381

Abstract As socioeconomic development continues, the issue of building energy consumption has attracted significant attention, and improving the thermal insulation performance of buildings has become a crucial strategic measure. Simultaneously, the application of solid waste in insulation materials has also become a hot topic. This paper reviews the sources and classifications of solid waste, focusing on research progress in its application as insulation materials in the domains of daily life, agriculture, and industry. The research shows that incorporating household solid waste materials, such as waste glass, paper, and clothing scraps into cementitious thermal insulation can significantly reduce the thermal conductivity of… More >

Zhengrong Shi^1,3, Jie Ren¹, Tao Zhang^1,3,*, Yanming Shen^2,*

Energy Engineering, Vol.121, No.3, pp. 681-702, 2024, DOI:10.32604/ee.2023.045238

Abstract Building energy consumption and building carbon emissions both account for more than 20% of their total national values in China. Building employing phase change material (PCM) for passive temperature control shows a promising prospect in meeting the comfort demand and reducing energy consumption simultaneously. However, there is a lack of more detailed research on the interaction between the location and thickness of PCM and indoor natural convection, as well as indoor temperature distribution. In this study, the numerical model of a passive temperature-controlled building integrating the developed PCM module is established with the help of ANSYS. In which, the actual… More > Graphic Abstract

Yasmin Alaa Hassan^1,*, Abdul Monem S. Rahma²

CMC-Computers, Materials & Continua, Vol.78, No.1, pp. 1423-1442, 2024, DOI:10.32604/cmc.2023.046149

Abstract Video watermarking plays a crucial role in protecting intellectual property rights and ensuring content authenticity. This study delves into the integration of Galois Field (GF) multiplication tables, especially GF(2⁴), and their interaction with distinct irreducible polynomials. The primary aim is to enhance watermarking techniques for achieving imperceptibility, robustness, and efficient execution time. The research employs scene selection and adaptive thresholding techniques to streamline the watermarking process. Scene selection is used strategically to embed watermarks in the most vital frames of the video, while adaptive thresholding methods ensure that the watermarking process adheres to imperceptibility criteria, maintaining the video’s visual quality.… More >