Magdalini Ntetsika, Panayiotis Papadopoulos^*

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.3, pp. 1243-1258, 2021, DOI:10.32604/cmes.2021.017404

Abstract A new and computationally efficient version of the immersed boundary method, which is combined with the coarse-graining method, is introduced for modeling inextensible filaments immersed in low-Reynolds number flows. This is used to represent actin biopolymers, which are constituent elements of the cytoskeleton, a complex network-like structure that plays a fundamental role in shape morphology. An extension of the traditional immersed boundary method to include a stochastic stress tensor is also proposed in order to model the thermal fluctuations in the fluid at smaller scales. By way of validation, the response of a single, massless, inextensible semiflexible filament immersed in… More >

Zaibo Zhou¹, Juanhong Liu^1,2,3,*, Kun Luo¹, Aixiang Wu^1,3, Hongjiang Wang^1,3

Journal of Renewable Materials, Vol.10, No.2, pp. 373-384, 2022, DOI:10.32604/jrm.2022.016380

Abstract In order to reduce the influence of impurities in hemihydrate phosphogypsum(HPG) on the environment and improve the workability of HPG, the effects of the content of quicklime and types of biopolymer (hydroxypropyl methylcellulose, xanthan gum, sodium polyacrylate(PAANa)) on the compressive strength, softening coefficient and ultrasonic velocity of HPG were evaluated. When the content of quicklime was 1.5% and the content of PAANa was 0.2%, HPG had the best mechanical properties and workability, its water retention rate can be increased by 5.8%, and unconfined compressive strength of 3 days increased by 10.3% and 7 days increased by 13.1%. Through the analysis… More > Graphic Abstract

Zhiyu Weng¹, Lina Wang^1,2,*, Qiang Liu², Xuemin Pan¹, Yonghao Xu³, Jing Li¹

Journal of Renewable Materials, Vol.9, No.8, pp. 1503-1517, 2021, DOI:10.32604/jrm.2021.015003

Abstract To explore an environmentally friendly improvement measure for red clay, the function and mechanism of xanthan gum biopolymer and polypropylene fibers on the strength properties of red clay were investigated by unconfined compressive strength and scanning electron microscopy tests. The test results demonstrated that the contents and curing ages of xanthan gum had significant influences on the unconfined compressive strength of red clay. Compared with untreated soil, 1.5% xanthan gum content was the optimal ratio in which the strength increment was between 41.52 kPa and 64.73 kPa. On the other hand, the strength of xanthan gum-treated red clay increased, whereas… More >

Chakib Mokhtari¹, Fouad Malek¹, Sami Halila², Mohamed Naceur Belgacem^3,*, Ramzi Khiari^3,4,5,*

Journal of Renewable Materials, Vol.9, No.7, pp. 1213-1223, 2021, DOI:10.32604/jrm.2021.015475

Abstract Bio-based polyurethanes (PUs) have been occurred a large attention nowadays. It was found to be an alternative to the petrochemical based materials to the fact of their weak environmental influence, availability, good price and biodegradability. In addition, the nature shows several bio-derived compounds as raw materials for the synthesis of polyols, including the vegetable oils, polyphenol, terpene, and other bio-renewable sources. With the aim to develop a new family of biobased polyurethanes (PUs) via vegetable oils, the elaboration of new Jojoba-based PUs was performed by catalyst-free polycondensation reaction of a synthesized Jojoba diol with various diisocyanates such us toluene diisocyanate… More > Graphic Abstract

Antonio Aprigio da Silva Curvelo¹, Antonio José Felix Carvalho^2,*, Daniel Pasquini³

Journal of Renewable Materials, Vol.9, No.4, pp. 599-600, 2021, DOI:10.32604/jrm.2021.015335

Abstract This article has no abstract. More >

Ragab E. Abou-Zeid¹, Korany A. Ali², Ramadan M. A. Gawad², Kholod H. Kamal³, Samir Kamel¹, Ramzi Khiari^4,5,6,*

Journal of Renewable Materials, Vol.9, No.4, pp. 601-613, 2021, DOI:10.32604/jrm.2021.014005

Abstract

Alginate blended with cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and tri-carboxylate cellulose nanofibers (TPC-CNF) prepared and encapsulated in the form of microcapsules (bio-polymeric beads). The cellulosic nanomaterials that used in this study were investigated as nanomaterials for wastewater treatment applications. Batch experiments were performed to study the removal of copper, lead, magnesium, and iron from aqueous solutions by the prepared beads. The effects of the sorbent dosage and the modified polymers on the removing efficiency of the metal cations were examined. Atomic absorption was used to measure the metal ions concentrations. The modified bio-polymeric beads (Alg-CNF, Alg-CNC, and Alg-TPC-CNF) exhibited… More >

H. N. Salwa¹, S. M. Sapuan^1,2,*, M. T. Mastura³, M. Y. M. Zuhri²

Journal of Renewable Materials, Vol.9, No.4, pp. 803-827, 2021, DOI:10.32604/jrm.2021.013977

Abstract Biopolymer composite has gained huge attention for its beneficial properties such as biodegradable and less impact to the environment. This consequently would diminish the dependency on the petroleum-based polymer. Abundance of studies have been done on the development and characterization of biopolymer composite materials for food packaging application, but work on the conceptual design of biopolymer composite packaging product is hardly found. Using the Kano Model, Quality Function Deployment for Environment (QFDE), morphological map, and Analytic Hierarchy Method (AHP) framework combination, this paper presents the conceptual design of a natural fibre reinforced biopolymer composites take-out food container. To understand customer… More >

Isamar Rosa¹, Henning Roedel¹, Maria I. Allende¹, Michael D. Lepech^1,*, David J. Loftus²

Journal of Renewable Materials, Vol.8, No.8, pp. 845-861, 2020, DOI:10.32604/jrm.2020.09844

Abstract Biopolymer-bound Soil Composites (BSC), are a novel bio-based construction material class, produced through the mixture and desiccation of biopolymers with inorganic aggregates with applications in soil stabilization, brick creation and in situ construction on Earth and space. This paper introduces a mixture design methodology to produce maximum strength for a given soil-biopolymer combination. Twenty protein and sand mix designs were investigated, with varying amounts of biopolymer solution and compaction regimes during manufacture. The ultimate compressive strength, density, and shrinkage of BSC samples are reported. It is observed that the compressive strength of BSC materials increases proportional to tighter particle packing… More >

Selma B. Jaconis^1,*, Augusto T. Morita², Paulo L. A. Coutinho³, Suzana Borschiver¹

Journal of Renewable Materials, Vol.7, No.11, pp. 1221-1230, 2019, DOI:10.32604/jrm.2019.00025

Abstract In recent years environmental and sustainability concerns have impacted the global chemical industry and instituted a rush to produce products from renewable raw materials. This dynamic, complex and turbulent organizational scenario, around themes touching on the issue of sustainable development model, was created involving a large number of different actors: chemical/petrochemical industries, agroindustry companies, oil/gas companies, brand owners and end users, biotechnology startups, governments, universities and society. This paper proposed the application of a structured and dynamic method of technological prediction for biopolymers in three levels: systematic monitoring process, relational database and the “alive” Technology Roadmapping visualization tool. The main… More >

Rakesh Kumar^1,*, Reshma Praveen¹, Shikha Rani¹, K. Sharma², K. P. Tiwary^3,*, K. Dinesh Kumar⁴

Journal of Renewable Materials, Vol.7, No.8, pp. 749-761, 2019, DOI:10.32604/jrm.2019.06286

Abstract ZnSe nanoparticles have been synthesized by microwave assisted method by using zinc chloride, selenium powder and ethylene diamine. The synthesized nanoparticles have been characterized structurally by FT-IR and XRD as well as morphological characterization was done by scanning electron microscope (SEM). The crystallite size after synthesis was obtained around 30 nm for pure ZnSe nanocrystallites. However, from SEM micrograph, agglomerated ZnSe nanoparticles of irregular shapes were observed. The as-synthesized ZnSe nanoparticles at different contents (1 to 5% w/w w.r.t SPI) were incorporated into soy protein isolate (SPI) to produce reinforced SPI films by solution casting method. The ZnSe nanoparticles incorporated… More >