Masood Ahmad¹, Abdul Hameed², Fasee Ullah^3,*, Ishtiaq Wahid¹, Atif Khan⁴, M. Irfan Uddin⁵, Shafiq Ahmad⁶, Ahmed M. El-Sherbeeny⁶

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 1353-1368, 2021, DOI:10.32604/cmc.2021.014237

Abstract Clustering algorithms optimization can minimize topology maintenance overhead in large scale vehicular Ad hoc networks (VANETs) for smart transportation that results from dynamic topology, limited resources and non-centralized architecture. The performance of a clustering algorithm varies with the underlying mobility model to address the topology maintenance overhead issue in VANETs for smart transportation. To design a robust clustering algorithm, careful attention must be paid to components like mobility models and performance objectives. A clustering algorithm may not perform well with every mobility pattern. Therefore, we propose a supervisory protocol (SP) that observes the mobility pattern of vehicles and identifies the… More >

A. Muthumari¹, J. Banumathi², S. Rajasekaran³, P. Vijayakarthik⁴, K. Shankar⁵, Irina V. Pustokhina⁶, Denis A. Pustokhin^7,*

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 1863-1879, 2021, DOI:10.32604/cmc.2021.013614

Abstract Cloud computing offers internet location-based affordable, scalable, and independent services. Cloud computing is a promising and a cost-effective approach that supports big data analytics and advanced applications in the event of forced business continuity events, for instance, pandemic situations. To handle massive information, clusters of servers are required to assist the equipment which enables streamlining the widespread quantity of data, with elevated velocity and modified configurations. Data deduplication model enables cloud users to efficiently manage their cloud storage space by getting rid of redundant data stored in the server. Data deduplication also saves network bandwidth. In this paper, a new… More >

Jehad Ali, Byeong-hee Roh^*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 849-875, 2021, DOI:10.32604/cmc.2021.014576

Abstract The controller is indispensable in software-defined networking (SDN). With several features, controllers monitor the network and respond promptly to dynamic changes. Their performance affects the quality-of-service (QoS) in SDN. Every controller supports a set of features. However, the support of the features may be more prominent in one controller. Moreover, a single controller leads to performance, single-point-of-failure (SPOF), and scalability problems. To overcome this, a controller with an optimum feature set must be available for SDN. Furthermore, a cluster of optimum feature set controllers will overcome an SPOF and improve the QoS in SDN. Herein, leveraging an analytical network process… More >

Prabakaran Rajamanickam¹, Shiloah Elizabeth Darmanayagam^1,*, Sunil Retmin Raj Cyril Raj²

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 709-722, 2021, DOI:10.32604/cmc.2021.014347

Abstract Liver Segmentation is one of the challenging tasks in detecting and classifying liver tumors from Computed Tomography (CT) images. The segmentation of hepatic organ is more intricate task, owing to the fact that it possesses a sizeable quantum of vascularization. This paper proposes an algorithm for automatic seed point selection using energy feature for use in level set algorithm for segmentation of liver region in CT scans. The effectiveness of the method can be determined when used in a model to classify the liver CT images as tumorous or not. This involves segmentation of the region of interest (ROI) from… More >

A. Benabid Najjar^1,*, N. AlSahly², R. AlShamass¹, M. Hosny²

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1169-1189, 2021, DOI:10.32604/cmc.2021.014140

Abstract Technology has tremendously contributed to improving communication and facilitating daily activities. Brain-Computer Interface (BCI) study particularly emerged from the need to serve people with disabilities such as Amyotrophic Lateral Sclerosis (ALS). However, with the advancements in cost-effective electronics and computer interface equipment, the BCI study is flourishing, and the exploration of BCI applications for people without disabilities, to enhance normal functioning, is increasing. Particularly, the P300-based spellers are among the most promising applications of the BCI technology. In this context, the region-based paradigm for P300 BCI spellers was introduced in an effort to reduce the crowding effect and adjacency problem… More >

Lingyun Xiang^1,2, Guohan Zhao¹, Qian Li³, Gwang-Jun Kim^4,*, Osama Alfarraj⁵, Amr Tolba^5,6

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 267-284, 2021, DOI:10.32604/cmc.2021.013488

Abstract Multiple kernel clustering is an unsupervised data analysis method that has been used in various scenarios where data is easy to be collected but hard to be labeled. However, multiple kernel clustering for incomplete data is a critical yet challenging task. Although the existing absent multiple kernel clustering methods have achieved remarkable performance on this task, they may fail when data has a high value-missing rate, and they may easily fall into a local optimum. To address these problems, in this paper, we propose an absent multiple kernel clustering (AMKC) method on incomplete data. The AMKC method first clusters the… More >

Yixuan Wang¹, Liping Yuan^2,3, Harish Garg⁴, Ali Bagherinia⁵, Parvïn Hamïd^6,7,8,*, Kim-Hung Pho⁹, Zulkefli Mansor¹⁰

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 369-392, 2021, DOI:10.32604/cmc.2021.012850

Abstract In order to improve performance and robustness of clustering, it is proposed to generate and aggregate a number of primary clusters via clustering ensemble technique. Fuzzy clustering ensemble approaches attempt to improve the performance of fuzzy clustering tasks. However, in these approaches, cluster (or clustering) reliability has not paid much attention to. Ignoring cluster (or clustering) reliability makes these approaches weak in dealing with low-quality base clustering methods. In this paper, we have utilized cluster unreliability estimation and local weighting strategy to propose a new fuzzy clustering ensemble method which has introduced Reliability Based weighted co-association matrix Fuzzy C-Means (RBFCM),… More >

Wunan Wan^1,*, Jun Chen¹, Jinyue Xia², Jinquan Zhang¹, Shibin Zhang¹, Hao Chen¹

Computer Systems Science and Engineering, Vol.36, No.2, pp. 417-434, 2021, DOI:10.32604/csse.2021.014460

Abstract In this paper, we propose two new attack algorithms on RSA implementations with CRT (Chinese remainder theorem). To improve the attack efficiency considerably, a clustering collision power attack on RSA with CRT is introduced via chosen-message pairs. This attack method is that the key parameters d_p and d_q are segmented by byte, and the modular multiplication collisions are identified by k-means clustering. The exponents d_p and d_q were recovered by 12 power traces of six groups of the specific message pairs, and the exponent d was obtained. We also propose a second order clustering collision power analysis attack against RSA… More >

Samih M. Mostafa^1,2,*

Journal on Artificial Intelligence, Vol.2, No.4, pp. 189-215, 2020, DOI:10.32604/jai.2020.014944

Abstract Because of the abundance of clustering methods, comparing between methods and determining which method is proper for a given dataset is crucial. Especially, the availability of huge experimental datasets and transactional and the emerging requirements for data mining and the like needs badly for clustering algorithms that can be applied in various domains. This paper presents essential notions of clustering and offers an overview of the significant features of the most common representative clustering algorithms of clustering categories presented in a comparative way. More specifically the study is based on the numerical type of the data that the algorithm supports,… More >

Samih M. Mostafa^1,*, Hirofumi Amano²

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 3253-3270, 2021, DOI:10.32604/cmc.2021.014675

Abstract CPU scheduling is the basic task within any time-shared operating system. One of the main goals of the researchers interested in CPU scheduling is minimizing time cost. Comparing between CPU scheduling algorithms is subject to some scheduling criteria (e.g., turnaround time, waiting time and number of context switches (NCS)). Scheduling policy is divided into preemptive and non-preemptive. Round Robin (RR) algorithm is the most common preemptive scheduling algorithm used in the time-shared operating systems. In this paper, the authors proposed a modified version of the RR algorithm, called dynamic time slice (DTS), to combine the advantageous of the low scheduling… More >