Kotaro Mori¹, Fumio Narita¹, Yasuhide Shindo¹

CMC-Computers, Materials & Continua, Vol.23, No.3, pp. 187-200, 2011, DOI:10.3970/cmc.2011.023.187

Abstract This work deals with the response of clamped-free magnetostrictive/piezoelectric/magnetostrictive laminates under electric field both numerically and experimentally. The laminate is fabricated using two magnetostrictive Terfenol-D layers and a soft piezoelectric PZT layer. Easy axis of Terfenol-D layers is length direction, while the polarization of PZT layer is the thickness direction. The magnetostriction of the Terfenol-D layers bonded to the upper and lower surfaces of the PZT layer is first measured. Next, a nonlinear finite element analysis is employed to evaluate the second-order magnetoelastic constants in the Terfenol-D layers bonded to the PZT layer using measured data. The induced magnetic field… More >

Hong-Hua Dai^1,2, Jeom Kee Paik³, S. N. Atluri²

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 155-186, 2011, DOI:10.3970/cmc.2011.023.155

Abstract The application of the Galerkin method, using global trial functions which satisfy the boundary conditions, to nonlinear partial differential equations such as those in the von Karman nonlinear plate theory, is well-known. Such an approach using trial function expansions involving multiple basis functions, leads to a highly coupled system of nonlinear algebraic equations (NAEs). The derivation of such a system of NAEs and their direct solutions have hitherto been considered to be formidable tasks. Thus, research in the last 40 years has been focused mainly on the use of local trial functions and the Galerkin method, applied to the piecewise… More >

Xiaonan Hou¹, Hong Hu¹, Yanping Liu¹, Vadim Silberschmidt²

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 119-134, 2011, DOI:10.3970/cmc.2011.023.119

Abstract Compressibility of warp-knitted spacer fabrics is one of their important mechanical properties with regard to many special applications such as body protection, cushion and mattresses. Due to specific structural features of the fabric and a non-linear mechanical behavior of monofilaments, the compression properties of this kind of fabrics are very complicated. Although several studies have been performed to investigate their compression behavior, its mechanism has not well been understood yet. This work is concerned with a study of compression mechanism of a selected warp-knitted spacer fabric with a given sandwich structure. Both experimental and numerical methods are used to study… More >

Cheng-Hung San¹, Che-Wun Hong^1,2

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 101-118, 2011, DOI:10.3970/cmc.2011.023.101

Abstract Poly(ethylene oxide) (PEO) is a commonly used electrolytic polymer in lithium ion batteries because of its high viscosity which allows fabricating thin layers. However, its inherent low ionic conductivity must be enhanced by the addition of highly conductive salt additives. Also its weak mechanical strength needs a complementary block, such as poly(styrene) (PS), to strengthen the electrolytic membrane during charging/discharging processes. PS is a strong material to complement the PEO and to create a reinforced copolymer electrolyte termed as the poly(styrene-b-ethylene oxide) (PS-PEO). In this work, molecular dynamics simulations are employed to study the effects of doping the PS constituents… More >

Hong-Hua Dai^1,2, Jeom Kee Paik³, Satya N. Atluri²

CMC-Computers, Materials & Continua, Vol.23, No.1, pp. 69-100, 2011, DOI:10.3970/cmc.2011.023.069

Abstract In this paper, the global nonlinear Galerkin method is used to perform an accurate and efficient analysis of the large deflection behavior of a simply-supported rectangular plate under combined loads. Through applying the Galerkin method to the governing nonlinear partial differential equations (PDEs) of the plate, we derive a system of coupled third order nonlinear algebraic equations (NAEs). However, the resultant system of NAEs is thought to be hard to tackle because one has to find the one physical solution from among the possible multiple solutions. Therefore, a suitable initial guess is required to lead to the real solution for… More >

J. Sladek¹, V. Sladek¹, P. Stanak¹, Ch. Zhang², M. Wünsche²

CMC-Computers, Materials & Continua, Vol.23, No.1, pp. 35-68, 2011, DOI:10.3970/cmc.2011.023.035

Abstract A contour integral method is developed for the computation of stress intensity, electric and magnetic intensity factors for cracks in continuously nonhomogeneous magnetoelectroelastic solids under a transient dynamic load. It is shown that the asymptotic fields in the crack-tip vicinity in a continuously nonhomogeneos medium are the same as in a homogeneous one. A meshless method based on the local Petrov-Galerkin approach is applied for the computation of the physical fields occurring in the contour integral expressions of intensity factors. A unit step function is used as the test functions in the local weak-form. This leads to local integral equations… More >

H. T. Chen¹,K. H. Hsu¹, S. K. Lee¹, L. Y. Haung¹

CMC-Computers, Materials & Continua, Vol.22, No.3, pp. 239-260, 2011, DOI:10.3970/cmc.2011.022.239

Abstract The inverse scheme of the finite difference method in conjunction with the least-squares scheme and experimental measured temperatures is proposed to solve a two-dimensional steady-state inverse heat conduction problem in order to estimate the natural-convection heat transfer coefficient under the isothermal situation [`h] iso from three vertical fins mounted on a vertical plate and fin efficiency hf for various values of the fin spacing and fin height. The measured fin temperatures and ambient air temperature are measured from the present experimental apparatus conducted in a small wind tunnel. The heat transfer coefficient on the middle fin of three vertical fins… More >

Gregor Kosec¹, Miha Založnik², Božidar Šarler¹, Hervé Combeau²

CMC-Computers, Materials & Continua, Vol.22, No.2, pp. 169-196, 2011, DOI:10.3970/cmc.2011.022.169

Abstract The simulation of macrosegregation as a consequence of solidification of a binary Al-4.5%Cu alloy in a 2-dimensional rectangular enclosure is tackled in the present paper. Coupled volume-averaged governing equations for mass, energy, momentum and species transfer are considered. The phase properties are resolved from the Lever solidification rule, the mushy zone is modeled by the Darcy law and the liquid phase is assumed to behave like an incompressible Newtonian fluid. Double diffusive effects in the melt are modeled by the thermal and solutal Boussinesq hypothesis. The physical model is solved by the novel Local Radial Basis Function Collocation Method (LRBFCM).… More >

M.F. Liu¹

CMC-Computers, Materials & Continua, Vol.22, No.2, pp. 97-128, 2011, DOI:10.3970/cmc.2011.022.097

Abstract A new invented Orthogonal Tapered Beam Functions (OTBFs) have been introduced in this paper and used in accordance with the Rayleigh-Ritz method to determine the natural frequencies and mode shapes of the non-uniform rectangular isotropic plates with varying thickness in one or two directions. The generation of the OTBFs is based on the static solution of a one-dimensional beam problem subjected to constant applied load, and then extends to an orthogonal or orthonomal infinite set of admissible functions by performing the three-term recurrence scheme. A wide range of non-uniform rectangular plate whose domain is referenced by a so-called truncation factor… More >

Smitha Gopinath^1,2, A. Ramach,ra Murthy¹, Nagesh R. Iyer¹

CMC-Computers, Materials & Continua, Vol.22, No.1, pp. 55-72, 2011, DOI:10.3970/cmc.2011.022.055

Abstract This paper presents the mathematical modeling techniques for nonlinear finite element analysis of RC structure to incorporate uniform corrosion effects. Effect of corrosion has been simulated as reduction in effective cross-sectional area of reinforcing bar, reduction in bonding phenomena and as reduction in material properties of reinforcing bar such as yield strength and elastic modulus. Appropriate constitutive laws for (i) corroded rebar elements and (ii) bond slip with corroded bar have been described. Procedure has been outlined to determine the global damage indicator by secant stiffness based approach. A corroded RC beam has been analysed to validate the proposed model… More >