Muhammad Shakeel Faridi¹, Saqib Ali^1,2,*, Guojun Wang^2,*, Salman Afsar Awan¹, Muhammad Zafar Iqbal³

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 1837-1854, 2023, DOI:10.32604/cmc.2023.041929

Abstract Trustworthiness and product traceability are essential factors in the apparel industry 4.0 for establishing successful business relationships among stakeholders such as customers, manufacturers, suppliers, and consumers. Each stakeholder has implemented different technology-based systems to record and track product transactions. However, these systems work in silos, and there is no intra-system communication, leading to a lack of complete supply chain traceability for all apparel stakeholders. Moreover, apparel stakeholders are reluctant to share their business information with business competitors; thus, they involve third-party auditors to ensure the quality of the final product. Furthermore, the apparel manufacturing industry faces challenges with counterfeit products,… More >

Abdennasser Dahmani¹, Yamina Ammi², Nadjem Bailek^3,4,*, Alban Kuriqi^5,6, Nadhir Al-Ansari^7,*, Salah Hanini², Ilhami Colak⁸, Laith Abualigah^{9,10,11,12,13,14}, El-Sayed M. El-kenawy¹⁵

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 2579-2594, 2023, DOI:10.32604/cmc.2023.040625

Abstract Increasing global energy consumption has become an urgent problem as natural energy sources such as oil, gas, and uranium are rapidly running out. Research into renewable energy sources such as solar energy is being pursued to counter this. Solar energy is one of the most promising renewable energy sources, as it has the potential to meet the world’s energy needs indefinitely. This study aims to develop and evaluate artificial intelligence (AI) models for predicting hourly global irradiation. The hyperparameters were optimized using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton training algorithm and STATISTICA software. Data from two stations in Algeria with different climatic… More >

Medhat A. Tawfeek^1,2, Nacim Yanes^3,4, Leila Jamel^5,*, Ghadah Aldehim⁵, Mahmood A. Mahmood^1,6

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 2545-2564, 2023, DOI:10.32604/cmc.2023.042179

Abstract The trend towards smart greenhouses stems from various factors, including a lack of agricultural land area owing to population concentration and housing construction on agricultural land, as well as water shortages. This study proposes building a full farming adaptation model that depends on current sensor readings and available datasets from different agricultural research centers. The proposed model uses a one-dimensional convolutional neural network (CNN) deep learning model to control the growth of strategic crops, including cucumber, pepper, tomato, and bean. The proposed model uses the Internet of Things (IoT) to collect data on agricultural operations and then uses this data… More >

Muhammad Tahir^1,2,*, Mingchu Li^1,2, Irfan Khan^1,2, Salman A. Al Qahtani³, Rubia Fatima⁴, Javed Ali Khan⁵, Muhammad Shahid Anwar⁶

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 2529-2544, 2023, DOI:10.32604/cmc.2023.042403

Abstract Real-time health data monitoring is pivotal for bolstering road services’ safety, intelligence, and efficiency within the Internet of Health Things (IoHT) framework. Yet, delays in data retrieval can markedly hinder the efficacy of big data awareness detection systems. We advocate for a collaborative caching approach involving edge devices and cloud networks to combat this. This strategy is devised to streamline the data retrieval path, subsequently diminishing network strain. Crafting an adept cache processing scheme poses its own set of challenges, especially given the transient nature of monitoring data and the imperative for swift data transmission, intertwined with resource allocation tactics.… More >

Rui Qiao, Shi Dong^*

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 2505-2527, 2023, DOI:10.32604/cmc.2023.043476

Abstract Effectively identifying and preventing the threat of Byzantine nodes to the security of distributed systems is a challenge in applying consortium chains. Therefore, this paper proposes a new consortium chain generation model, deeply analyzes the vulnerability of the consortium chain consensus based on the behavior of the nodes, and points out the effects of Byzantine node proportion and node state verification on the consensus process and system security. Furthermore, the normalized verification node aggregation index that represents the consensus ability of the consortium organization and the trust evaluation function of the verification node set is derived. When either of the… More >

Fengting Luo, Ruwei Huang^*, Yuyue Chen

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 1815-1835, 2023, DOI:10.32604/cmc.2023.041676

Abstract Smart parks serve as integral components of smart cities, where they play a pivotal role in the process of urban modernization. The demand for cross-domain cooperation among smart devices from various parks has witnessed a significant increase. To ensure secure communication, device identities must undergo authentication. The existing cross-domain authentication schemes face issues such as complex authentication paths and high certificate management costs for devices, making it impractical for resource-constrained devices. This paper proposes a blockchain-based lightweight and efficient cross-domain authentication protocol for smart parks, which simplifies the authentication interaction and requires every device to maintain only one certificate. To… More >

HENG LI^1,#, YOUMING LEI^3,#, GAOFENG LI¹, YUNCHAO HUANG^2,*

Oncology Research, Vol.32, No.1, pp. 187-197, 2024, DOI:10.32604/or.2023.030656

Abstract Lung cancer is a prevalent malignancy, and fatalities of the disease exceed 400,000 cases worldwide. Lung squamous cell carcinoma (LUSC) has been recognized as the most common pathological form of lung cancer. The comprehensive understanding of molecular features related to LUSC progression has great significance in LUSC prognosis assessment and clinical management. In this study, we aim to identify a panel of signature genes closely associated with LUSC, which can provide novel insights into the progression of LUSC. Gene expression profiles were retrieved from public resources including gene expression omnibus (GEO) and the cancer genome atlas (TCGA) database. Differentially expressed… More >

Ali Mahamied¹, Amjad A. Yasin¹, Yazan Alzubi^1,*, Jamal Al Adwan¹, Issa Mahamied²

Structural Durability & Health Monitoring, Vol.17, No.6, pp. 501-519, 2023, DOI:10.32604/sdhm.2023.028686

Abstract Nowadays, an extensive number of studies related to the performance of base isolation systems implemented in regular reinforced concrete structures subjected to various types of earthquakes can be found in the literature. On the other hand, investigations regarding the irregular base-isolated reinforced concrete structures’ performance when subjected to pulse-like earthquakes are very scarce. The severity of pulse-like earthquakes emerges from their ability to destabilize the base-isolated structure by remarkably increasing the displacement demands. Thus, this study is intended to investigate the effects of pulse-like earthquake characteristics on the behavior of low-rise irregular base-isolated reinforced concrete structures. Within the study scope,… More >

Bengang Zhang^1,*, Antonio Pizzi^2,*, Mathieu Petrissans¹, Anelie Petrissans¹, Colin Baptiste¹

Journal of Renewable Materials, Vol.11, No.12, pp. 4097-4121, 2023, DOI:10.32604/jrm.2023.029761

Abstract Aminated tannins were prepared by reacting mimosa condensed tannin extract with ammonia yielding the substitution of many, if not all of the tannin hydroxyl groups with –NH₂ groups. A tannin-aminated tannin (ATT) particleboard coating was then prepared by reacting raw tannin extract with aminated tannin extract and thus cross-liking the two by substituting tannin’s hydroxyl groups with the –NH₂ groups on the aminated tannin to form –NH-bridges between the two. The resulting particleboard coating gave encouraging results when pressed at 180°C for 3 min. Conversely, the system in which tannin was reacted/cross-liked with urea (ATU) by a similar amination reaction… More >

Lili Lei^*, Ze Li, Haichao Zhou, Jing Wang, Wei Lin

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.1, pp. 147-163, 2024, DOI:10.32604/fdmp.2023.030158

Abstract The vehicle industry is always in search of breakthrough energy-saving and emission-reduction technologies. In recent years, vehicle intelligence has progressed considerably, and researchers are currently trying to take advantage of these developments. Here we consider the case of many vehicles forming a queue, i.e., vehicles traveling at a predetermined speed and distance apart. While the majority of existing studies on this subject have focused on the influence of the longitudinal vehicle spacing, vehicle speed, and the number of vehicles on aerodynamic drag and fuel economy, this study considers the lateral offset distance of the vehicle queue. The group fuel consumption… More >