Wenjun Zhou^1,2, Mingzhi Yang¹, Qian Peng², Yong Peng^1,*, Kui Wang¹, Qiang Xiao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 735-755, 2024, DOI:10.32604/cmes.2024.047258

Abstract The widespread adoption of aluminum alloy electric buses, known for their energy efficiency and eco-friendliness, faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel. This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries, necessitating robust frame protection. Our study aims to optimize the connectors of aluminum alloy bus frames, emphasizing durability, energy efficiency, and safety. This research delves into Multi-Objective Coordinated Optimization (MCO) techniques for lightweight design in aluminum alloy bus body connectors. Our goal is to enhance lightweighting, reinforce energy absorption, and improve deformation resistance in… More >

Jamal N. Al Abbasi¹, Ahmed Z. Afify^2,*, Badr Alnssyan^3,*, Mustafa S. Shama^4,5

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 513-536, 2024, DOI:10.32604/cmes.2024.046533

Abstract This study proposes a new flexible family of distributions called the Lambert-G family. The Lambert family is very flexible and exhibits desirable properties. Its three-parameter special sub-models provide all significant monotonic and non-monotonic failure rates. A special sub-model of the Lambert family called the Lambert-Lomax (LL) distribution is investigated. General expressions for the LL statistical properties are established. Characterizations of the LL distribution are addressed mathematically based on its hazard function. The estimation of the LL parameters is discussed using six estimation methods. The performance of this estimation method is explored through simulation experiments. The usefulness and flexibility of the… More >

Yang Li¹, Jiangping Xu^1,*, Yun Liu¹, Wen Zhong^2,*, Fei Wang³

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 461-483, 2024, DOI:10.32604/cmes.2024.046467

Abstract In this research, we present the pure open multi-processing (OpenMP), pure message passing interface (MPI), and hybrid MPI/OpenMP parallel solvers within the dynamic explicit central difference algorithm for the coining process to address the challenge of capturing fine relief features of approximately 50 microns. Achieving such precision demands the utilization of at least 7 million tetrahedron elements, surpassing the capabilities of traditional serial programs previously developed. To mitigate data races when calculating internal forces, intermediate arrays are introduced within the OpenMP directive. This helps ensure proper synchronization and avoid conflicts during parallel execution. Additionally, in the MPI implementation, the coins… More > Graphic Abstract

Jiaqi Wu¹, Li Zhuo^1,*, Jianliang Pei¹, Yao Li², Hongqiang Xie¹, Jiaming Wu¹, Huaizhong Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 621-645, 2024, DOI:10.32604/cmes.2024.046398

Abstract The surrounding geological conditions and supporting structures of underground engineering are often updated during construction, and these updates require repeated numerical modeling. To improve the numerical modeling efficiency of underground engineering, a modularized and parametric modeling cloud server is developed by using Python codes. The basic framework of the cloud server is as follows: input the modeling parameters into the web platform, implement Rhino software and FLAC^3D software to model and run simulations in the cloud server, and return the simulation results to the web platform. The modeling program can automatically generate instructions that can run the modeling process in… More >

RABIRANJAN MURMU^a,b, DEBASHIS ROY^a, HAREKRUSHNA SUTAR^b

Journal of Polymer Materials, Vol.40, No.3-4, pp. 125-139, 2023, DOI:10.32381/JPM.2023.40.3-4.1

Abstract A one dimensional isothermal model is proposed by modelling the kinetics of methanol transport at anode flow channel (AFC), membrane and cathode catalyst layer of direct methanol fuel cell (DMFC). Analytical model is proposed to predict methanol cross-over rate through the electrolyte membrane and cell performance. The model presented in this paper considered methanol diffusion and electrochemical oxidation at the anode and cathode channels. The analytical solution of the proposed model was simulated in a MATLAB environment to obtain the polarization curve and leakage current. The effect of methanol concentration on cell voltage and leakage current is studied. The methanol… More >

He Wang^1,*, Ying He²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 889-899, 2024, DOI:10.32604/fdmp.2023.042728

Abstract Magnetohydrodynamic (MHD) induction pumps are contactless pumps able to withstand harsh environments. The rate of fluid flow through the pump directly affects the efficiency and stability of the device. To explore the influence of induction pump settings on the related delivery speed, in this study, a numerical model for coupled electromagnetic and flow field effects is introduced and used to simulate liquid metal lithium flow in the induction pump. The effects of current intensity, frequency, coil turns and coil winding size on the velocity of the working fluid are analyzed. It is shown that the first three parameters have a… More >

Ran Wang¹, Aimin Gong^1,*, Shanqing Shao¹, Baoli Qu², Jing Xu³, Fulai Wang¹, Feipeng Liu^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 749-769, 2024, DOI:10.32604/fdmp.2023.042566

Abstract The mechanical properties of cementitious sand and gravel damming material have been experimentally determined by means of microscopic SEM (Scanning Electron Microscopy) image analysis. The results show that the combination of fly ash and water can fill the voids in cemented sand and gravel test blocks because of the presence of hydrated calcium silicate and other substances; thereby, the compactness and mechanical properties of these materials can be greatly improved. For every 10 kg/m³ increase in the amount of cementitious material, the density increases by about 2%, and the water content decreases by 0.2%. The amount of cementitious material used… More > Graphic Abstract

Jongwook Si¹, Sungyoung Kim^2,*

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 2893-2908, 2024, DOI:10.32604/cmc.2023.046081

Abstract In the context of high compression rates applied to Joint Photographic Experts Group (JPEG) images through lossy compression techniques, image-blocking artifacts may manifest. This necessitates the restoration of the image to its original quality. The challenge lies in regenerating significantly compressed images into a state in which these become identifiable. Therefore, this study focuses on the restoration of JPEG images subjected to substantial degradation caused by maximum lossy compression using Generative Adversarial Networks (GAN). The generator in this network is based on the U-Net architecture. It features a new hourglass structure that preserves the characteristics of the deep layers. In… More >

Jai Hak Park^*

Digital Engineering and Digital Twin, Vol.2, pp. 79-101, 2024, DOI:10.32604/dedt.2024.047280

Abstract A finite element alternating method has been known as a very convenient and accurate method to solve two and three-dimensional crack problems. In this method, a general crack problem is solved by a superposition of two solutions. One is a finite element solution for a finite body without a crack, and the other is an analytical solution for a crack in an infinite body. Since a crack is not considered in a finite element model, generating a model is very simple. The method is especially very convenient for a fatigue crack growth simulation. Over the past 40 years, S. N.… More >

Jian Zhong, Lei Zhang^*, Ling Qin

Energy Engineering, Vol.121, No.4, pp. 951-971, 2024, DOI:10.32604/ee.2023.041433

Abstract Partial shading conditions (PSCs) caused by uneven illumination become one of the most common problems in photovoltaic (PV) systems, which can make the PV power-voltage (P-V) characteristics curve show multi-peaks. Traditional maximum power point tracking (MPPT) methods have shortcomings in tracking to the global maximum power point (GMPP), resulting in a dramatic decrease in output power. In order to solve the above problems, intelligent algorithms are used in MPPT. However, the existing intelligent algorithms have some disadvantages, such as slow convergence speed and large search oscillation. Therefore, an improved whale algorithm (IWOA) combined with the P&O (IWOA-P&O) is proposed for… More >