Zhaoli Tian^1,2, Yunlong Liu^1,2,*, Shiping Wang¹, A Man Zhang¹, Youwei Kang³

CMES-Computer Modeling in Engineering & Sciences, Vol.118, No.2, pp. 397-423, 2019, DOI:10.31614/cmes.2019.04419

Abstract The low frequency load of an underwater explosion bubble and the generated waves can cause significant rigid motion of a ship that threaten its stability. In order to study the fluid-structure interaction qualitatively, a two-dimensional underwater explosion bubble dynamics model, based on the potential flow theory, is established with a double-vortex model for the doubly connected bubble dynamics simulation, and the bubble shows similar dynamics to that in 3-dimensional domain. A fully nonlinear fluid-structure interaction model is established considering the rigid motion of the floating body using the mode-decomposition method. Convergence test of the model is implemented by simulating the… More >

Jing Zhang^1,2,3, Xiuqing Qian^1,2, Haixia Zhang^1,2, Zhicheng Liu^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.116, No.2, pp. 301-314, 2018, DOI: 10.31614/cmes.2018.04239

Abstract Elevated intraocular pressure appears to have a broader impact on increased resistance to aqueous humor outflow through the conventional aqueous outflow system (AOS). However, there is still no consensus about exact location of the increased outflow resistance of aqueous humor, and the mechanism is not perfect. In addition, it is difficult to accurately obtain hydrodynamic parameters of aqueous humor within the trabecular meshwork outflow pathways based on the current technology. In this paper, a two-way fluid-structure interaction simulation was performed to study the pressure difference and velocity in the superficial trabecular meshwork, juxtacanalicular meshwork (JCM) and Schlemm’s canal in response… More >

Daisuke Ishihara^1,2, Tomoyoshi Horie¹, Tomoya Niho¹, Akiyoshi Baba³

CMES-Computer Modeling in Engineering & Sciences, Vol.108, No.6, pp. 429-452, 2015, DOI:10.3970/cmes.2015.108.429

Abstract In this study, a hierarchal decomposition is proposed to solve the structure- fluid-electrostatic interaction in a microelectromechanical system (MEMS). In the proposed decomposition, the structure-fluid-electrostatic interaction is partitioned into the structure-fluid interaction and the electrostatic field using the iteratively staggered method, and the structure-fluid interaction is split into the structurefluid velocity field and the fluid pressure field using the projection method. The proposed decomposition is applied to a micro cantilever beam actuated by the electrostatic force in air. It follows from the comparisons among the numerical and experimental results that the proposed method can predict the MEMS vibration characteristics accurately. More >

A. Tadeu¹, P. Stanak², J. Antonio¹, J. Sladek², V. Sladek²

CMES-Computer Modeling in Engineering & Sciences, Vol.107, No.5, pp. 345-378, 2015, DOI:10.3970/cmes.2015.107.345

Abstract This paper implements a numerical method based on the mutual coupling of the boundary element method (BEM) and the meshless local Petrov-Galerkin (MLPG) method to simulate elastic wave propagation in fluid-filled boreholes. The fluid-solid interaction is solved in the frequency domain assuming longitudinally invariant geometry in the axial direction (2.5D formulation).
This model is used to assess the influence of the non-homogeneous material properties of a borehole wall that can be caused by a damaged zone, construction process or the ageing of material. The BEM is used to model propagation within the unbounded homogeneous domain and the fluid domain… More >

L.L. Chen¹, H.B. Chen^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.107, No.3, pp. 249-276, 2015, DOI:10.3970/cmes.2015.107.249

Abstract Engineers have started to develop ways to decrease noise radiation. Structural-acoustic design sensitivity analysis can provide information on how changes in design variable affect the radiated acoustic performance. As such, it is an important step in the structural-acoustic design and in optimization processes. For thin structures immersed in water, a full interaction between the structural domain and the fluid domain needs to be taken into account. In this work, the finite element method is used to model the structure parts and the boundary element method is applied to the exterior acoustic problem. The formula of the sound pressure sensitivity based… More >

H.Q. Nguyen¹, C.-D. Tran¹, T. Tran-Cong¹

CMES-Computer Modeling in Engineering & Sciences, Vol.105, No.5, pp. 399-439, 2015, DOI:10.3970/cmes.2015.105.399

Abstract In this paper, dynamic behaviours of dilute polymer solutions of various bead-spring chain models in shear flow are studied using a coarse-grained method based on the Integrated Radial Basis Function Networks (IRBFNs) and stochastic technique. The velocity field governed by the macroscopic conservation equations is determined by the IRBFN-based method, whereas the evolution of configurations of polymer chains governed by the diffusion stochastic differential equations are captured by the Brownian Configuration Field (BCF) approach. The system of micro-macro equations is closed by the Kramers’ expression, which allows for the determination of the polymer stresses in terms of BCF configurations. In… More >

Salvatore Brischetto¹

CMES-Computer Modeling in Engineering & Sciences, Vol.104, No.4, pp. 305-327, 2015, DOI:10.3970/cmes.2015.104.305

Abstract This paper proposes the free vibration analysis of Double-Walled Carbon NanoTubes (DWCNTs). A continuum elastic three-dimensional shell model is used for natural frequency investigation of simply supported DWCNTs. The 3D shell method is compared with beam analyses to show the applicability limits of 1D beam models. The effect of van der Waals interaction between the two cylinders is shown for different Carbon NanoTube (CNT) lengths and vibration modes. Results give the van der Waals interaction effect in terms of frequency values. In order to apply the 3D shell continuum model, DWCNTs are defined as two concentric isotropic cylinders (with an… More >

X. X. Cui¹, X. Zhang^1,2, X. Zhou³, Y. Liu¹, F. Zhang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.98, No.6, pp. 565-599, 2014, DOI:10.3970/cmes.2014.098.565

Abstract The material point method (MPM) discretizes the material domain by a set of particles, and has showed advantages over the mesh-based methods for many challenging problems associated with large deformation. However, at the same time, it requires more computational resource and has difficulties to construct high order scheme when simulating the fluid in high explosive (HE) explosion problems. A coupled finite difference material point (CFDMP) method is proposed through a bridge region to combine the advantages of the finite difference method (FDM) and MPM. It solves a 3D HE explosion and its interaction with the surrounding structures by dividing the… More >

Louis C. Foucard¹, John Pellegrino¹, Franck J. Vernerey^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.98, No.1, pp. 101-127, 2014, DOI:10.3970/cmes.2014.098.101

Abstract Many colloidal-sized particles encountered in biological and membranebased separation applications can be characterized as soft vesicles such as cells, yeast, viruses and surfactant micelles. The deformation of these vesicles is expected to critically affect permeation by accommodating pore shapes and sizes or enhancing the adhesion with a pore surface. Numerical and theoretical modelings will be critical to fully understand these processes and thus design novel filtration membranes that target, not only size, but deformability as a selection criterion. The present paper therefore introduces a multiscale strategy that enables the determination of the permeability of a fibrous network with respect to… More >

S. D. Akbarov^1,2, M. I. Ismailov³

CMES-Computer Modeling in Engineering & Sciences, Vol.97, No.4, pp. 359-390, 2014, DOI:10.3970/cmes.2014.097.359

Abstract The forced vibration of the system consisting of the pre-stretched plate made of highly-elastic material and half-plane filled by barotropic compressible Newtonian viscous fluid is considered. It is assumed that this forced vibration is caused by the lineal located time-harmonic force acting on the free face plane of the plate. The motion of the pre-stretched plate is written by utilizing of the linearized exact equations of the theory of elastic waves in the initially stressed bodies, but the motion of the compressible viscous fluid is described by the linearized Navier-Stokes equations. The elastic relations of the plate material are described… More >