Yongjie Zhang¹, Wenyan Wang¹, Xinghua Liang¹, Yuri Bazilevs², Ming-Chen Hsu², Trond Kvamsdal³, Reidar Brekken⁴, Jørgen Isaksen⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.42, No.2, pp. 131-150, 2009, DOI:10.3970/cmes.2009.042.131

Abstract This paper describes a comprehensive and high-fidelity finite element meshing approach for patient-specific arterial geometries from medical imaging data, with emphasis on cerebral aneurysm configurations. The meshes contain both the blood volume and solid arterial wall, and are compatible at the fluid-solid interface. There are four main stages for this meshing method: 1) Image segmentation and geometric model construction; 2) Tetrahedral mesh generation for the fluid volume using the octree-based method; 3) Mesh quality improvement stage, in which edge-contraction, pillowing, optimization, geometric flow smoothing, and mesh cutting are applied to the fluid mesh; and 4) Mesh generation for the blood… More >

E. Majchrzak¹, B. Mochnacki², A. L. Greer³, J. S. Suchy⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.41, No.2, pp. 131-146, 2009, DOI:10.3970/cmes.2009.041.131

Abstract Multi-layered thin metal film subjected to a short-pulse laser heating is considered. Mathematical description of the process discussed bases on the equation in which there appear the relaxation time and the thermalization time (dual-phase-lag-model). In this study we develop a three level implicit finite difference scheme for numerical modelling of heat transfer in non-homogeneous metal film. At the interfaces an ideal contact between successive layers is assumed. At the stage of computations a solution of only one three-diagonal linear system corresponds to transition from time t to t + Δt. The mathematical model, numerical algorithm and examples of computations are… More >

Shuling Hu¹, Shengping Shen^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.30, No.2, pp. 57-64, 2008, DOI:10.3970/cmes.2008.030.057

Abstract The effects of surface energy on the interaction between two voids of equal size are investigated. The problem is solved by series expansion in bipolar coordinates. The results show that the surface energy significantly affects the stress concentration around the holes as the size of the holes shrinks to nanometers, meanwhile the interaction between the holes also influences the stress distribution around the holes, which become evident as the holes close to each other. This problem is of great importance in engineering applications. More >

Jyoti Ranjan Majhi, Ranjan Ganguli¹

CMES-Computer Modeling in Engineering & Sciences, Vol.27, No.1&2, pp. 25-36, 2008, DOI:10.3970/cmes.2008.027.025

Abstract The flapping equation for a rotating rigid helicopter blade is typically derived by considering 1) small flap angle, 2) small induced angle of attack and 3) linear aerodynamics. However, the use of nonlinear aerodynamics can make the assumptions of small angles suspect. A general equation describing helicopter blade flap dynamics for large flap angle and large induced inflow angle of attack is derived in this paper with nonlinear aerodynamics . Numerical simulations are performed by solving the nonlinear flapping ordinary differential equation for steady state conditions and the validity of the small angle approximations are examined. It is shown that… More >

A. Sellier¹

CMES-Computer Modeling in Engineering & Sciences, Vol.25, No.3, pp. 165-180, 2008, DOI:10.3970/cmes.2008.025.165

Abstract The slow viscous and either imposed or gravity-driven migration of a solid arbitrarily-shaped particle suspended in a Newtonian liquid bounded by a spherical cavity is calculated using two different boundary element approaches. Each advocated method appeals to a few boundary-integral equations and, by contrast with previous works, also holds for non-spherical particles. The first procedure puts usual free-space Stokeslets on both the cavity and particle surfaces whilst the second one solely spreads specific Stokeslets obtained elsewhere in Oseen (1927) on the particle's boundary. Each approach receives a numerical implementation which is found to be in excellent agreement with accurate results… More >

B. Yang^1,2, S.-C. Wong³, S. Qu³

CMES-Computer Modeling in Engineering & Sciences, Vol.24, No.2&3, pp. 81-94, 2008, DOI:10.3970/cmes.2008.024.081

Abstract In the modeling of overall property of composites, the effect of particle interaction has been either numerically taken into account within a (representative) volume element of a small number of particles or neglected/ignored in order for efficient solution to a large system of particles. In this study, we apply the point-defect Green's function (GF) to take into account the effect of particle interaction. It is applicable to small volume fractions of particles (within 10 %). The high efficiency of the method enables a simulation of a large system of particles with generally elastic anisotropy, arbitrary shape and composition, and arbitrary… More >

Tomonori Yamada¹, Shinobu Yoshimura¹

CMES-Computer Modeling in Engineering & Sciences, Vol.24, No.1, pp. 51-60, 2008, DOI:10.3970/cmes.2008.024.051

Abstract Flight dynamics of flapping insects is still an open area of research, though it is well known that they can provide superior flight abilities such as hovering motion. The numerical analysis of flapping wing requires fluid-structure interaction (FSI) analysis to evaluate the effect of deformable wing on flight ability. Such FSI analysis is quite challenging because not only the tight coupling approach to predict flight ability accurately, but also the robust mesh control to trace the large motion of the wing with elastic deformation are required. A new iterative partitioned coupling algorithm for the FSI problems is proposed in this… More >

W.H. Chen¹, H.C. Cheng², Y.C. Hsu³

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.2, pp. 123-146, 2007, DOI:10.3970/cmes.2007.020.123

Abstract The evaluation of the fundamental mechanical properties of single/multi-walled carbon nanotubes(S/MWCNTs) is of great importance for their industrial applications. The present work is thus devoted to the determination of various mechanical properties of S/MWCNTs using molecular dynamics (MD) simulations. The study first focuses on the exploration of the effect of the weak inlayer van der Waals (vdW) atomistic interactions on the mechanical properties of S/MWCNTs. Secondly, in addition to the zig-zag and armchair types of CNTs, the hybrid type of MWCNTs that comprise a zig-zag outer tube and an inner armchair tube is also analyzed. Thirdly, the investigation is extended… More >

Chun Yang¹, Dalin Tang², Chun Yuan³, Thomas S. Hatsukami⁴, Jie Zheng⁵, Pamela K. Woodard⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.19, No.3, pp. 233-246, 2007, DOI:10.3970/cmes.2007.019.233

Abstract It has been recognized that fluid-structure interactions (FSI) play an important role in cardiovascular disease initiation and development. However, in vivo MRI multi-component FSI models for human carotid atherosclerotic plaques with bifurcation and quantitative comparisons of FSI models with fluid-only or structure-only models are currently lacking in the literature. A 3D non-Newtonian multi-component FSI model based on in vivo/ex vivo MRI images for human atherosclerotic plaques was introduced to investigate flow and plaque stress/strain behaviors which may be related to plaque progression and rupture. Both artery wall and plaque components were assumed to be hyperelastic, isotropic, incompressible and homogeneous. Blood… More >

K. Han ¹, Y. T. Feng ¹, D. R. J. Owen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.18, No.2, pp. 87-100, 2007, DOI:10.3970/cmes.2007.018.087

Abstract Numerical procedures are introduced for simulations of irregular particle transport in turbulent flows using the coupled lattice Boltzmann method (LBM) and the discrete element method (DEM). The fluid field is solved by the extended LBM with the incorporation of the Smagorinsky turbulence approach, while particle interaction is modeled by the DEM. The hydrodynamic interactions between fluid and particles are realised through an immersed boundary condition, which gives rise to a coupled solution strategy to model the fluid-particle system under consideration. Main computational aspects comprise the lattice Boltzmann formulation for the solution of fluid flows; the incorporation of the large eddy… More >