Reza Khademi Zahedi¹, Naif Alajlan², Hooman Khademi Zahedi³, Timon Rabczuk^2,*

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 4635-4655, 2022, DOI:10.32604/cmc.2022.017682

Abstract The outstanding thermal, optical, electrical and mechanical properties of molybdenum disolphide (MoS₂) heterostructures make them exceptional candidates for an extensive area of applications. Nevertheless, despite considerable technological and academic interest, there is presently a few information regarding the mechanical properties of these novel two-dimensional (2D) materials in the presence of the defects. In this manuscript, we performed extensive molecular dynamics simulations on pre-cracked and pre-notched all-molybdenum disolphide (MoS₂) heterostructure systems using ReaxFF force field. Therefore, we study the influence of several central-crack lengths and notch diameters on the mechanical response of 2H phase, 1T phase and composite 2H /1T MoS₂… More >

Huaying He^1,2, Zhiyong Lin^1,2, Yuelan Weng^1,2, Jianjie Zhou^1,2, Man Ye^1,2, Xiaowei Luo^1,2, Qifeng Zhao^1,2,*

Congenital Heart Disease, Vol.16, No.6, pp. 655-673, 2021, DOI:10.32604/CHD.2021.016054

Abstract Background: To achieve successful management of infants with congenital heart disease (CHD) together with pulmonary hypertension (PH), postoperative care, especially feeding care is vital in addition to surgery. Postoperative feeding is comprised of three stages: feeding in the intensive care unit, feeding in the general ward and family feeding, in which the general ward is considered as the “transitional stage”. At present, there is little research on the optimal mode of feeding care for the transitional stage, and there is no universally recognized and accepted protocol. Methods: We retrospectively analyzed 114 CHD infants with PH who underwent family-centered (FC) feeding… More >

Chungkuk Jin^*, MooHyun Kim

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.1, pp. 315-337, 2021, DOI:10.32604/cmes.2021.016494

Abstract This study presents a practical design strategy for a large-size Submerged Floating Tunnel (SFT) under different target environments through global-performance simulations. A coupled time-domain simulation model for SFT is established to check hydro-elastic behaviors under the design random wave and earthquake excitations. The tunnel and mooring lines are modeled with a finite-element line model based on a series of lumped masses connected by axial, bending, and torsional springs, and thus the dynamic/structural deformability of the entire SFT is fully considered. The dummy-connection-mass method and constraint boundary conditions are employed to connect the tunnel and mooring lines in a convenient manner.… More >

Hongyan Ai^1,*, Yan Wang², Hongmei Gu²

Oncologie, Vol.23, No.2, pp. 185-193, 2021, DOI:10.32604/Oncologie.2021.016420

Abstract Objective: To explore the effect of the cluster nursing mode combined with blood pressure regulation on the surgical tolerance of patients with esophageal cancer and hypertension. Methods: The clinical data of 86 patients with esophageal cancer and hypertension treated in our hospital (February 2016–February 2017) were retrospectively analyzed. The patients were randomly split into research group and reference group, with 43 cases in each group. The reference group received routine nursing, while the research group received cluster nursing combined with blood pressure regulation. The SBP, DBP and heart rates at D1 (at admission), D2 (2 h before surgery) and D3… More >

Christian Brütting¹, Julia Dreier², Christian Bonten², Volker Altstädt¹, Holger Ruckdäschel^1,*

Journal of Renewable Materials, Vol.9, No.11, pp. 1859-1868, 2021, DOI:10.32604/jrm.2021.016244

Abstract Polylactide (PLA) bead foams show a high potential regarding their applicability in packaging or consumer products. Concerning the comparable properties of PLA to Polystyrene (PS) and the good CO₂ footprint it represents a potential alternative to petroleum-based polymer foams. However, foaming of PLA is challenging, due to its low melt strength, therefore chemical modifiers are often used. Concerning the bead foam technology regarding PLA, the available literature is limited so far. Within this study, the bead foaming behavior of neat and modified amorphous PLA was investigated. The material was modified by talc and an epoxy-based chain extender. These compounds have… More >

Marie Laure Yammine^#,*, Camilla Calvieri^#, Marcello Chinali, Salvatore Giannico, Giulia Cafiero, Ugo Giordano

Congenital Heart Disease, Vol.16, No.5, pp. 457-467, 2021, DOI:10.32604/CHD.2021.015896

Abstract Background: In recent decades, aortic stenting has become a promising alternative to surgery for both native aortic coarctation and re-stenosis in children and adults. However, comparative long-term outcomes have poorly been investigated. Methods: We included 212 patients with previous aortic repair (19 ± 8.7 years) divided into 3 groups: 139 with single-time surgical repair (CoA-S group); 18 with single-time percutaneous stenting (CoA-PS group); and 55 hybrid patients with multiple aortic procedures because of re-coarctation occurrence (CoA-H group). All patients underwent 24-hour ambulatory blood pressure monitoring and trans-thoracic echocardiography. Results: After a median follow-up of 17 years after aortic repair, antihypertensive… More >

Xulan Wang^1,*, Zezhong Chen¹, Changzhen Liu¹, Wei Ren², Bo Wu¹, Shude Ji¹, Xiaofei Chen¹, Shijie Wen¹, Yonggang Hao¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 821-831, 2021, DOI:10.32604/fdmp.2021.014707

Abstract Taking the combustor composite structure of a high-strength diesel engine as the main research object, dedicated tests have been conducted to verify the accuracy of three distinct cylinder gasket pressure simulation models. Using the measured cylinder gasket compression rebound curve, a gasket unit has been designed and manufactured. For this unit, the influence of the bolt pretension, cylinder body and cylinder head material on gasket sealing pressure has been investigated systematically in conditions of thermo-mechanical coupling. The results show that the bolt pretension force is one of the most important factors affecting the cylinder gasket sealing pressure. The change of… More >

Qingfang Lv¹, Tongchen Han¹, Ye Liu^2,*, Yi Ding¹, Yujie Lu¹

Journal of Renewable Materials, Vol.9, No.10, pp. 1757-1779, 2021, DOI:10.32604/jrm.2021.015536

Abstract

Cross-laminated bamboo (CLB) have a high strength to weight ratio and stable bidirectional mechanical properties. Inspired by the investigation on cross-laminated timber (CLT) rocking walls, CLB rocking walls with conventional friction dampers (CFDs) are studied in this paper. To investigate the mechanical properties of the CLB rocking wall, seven tests are conducted under a cyclic loading scheme, and different test parameters, including the existence of the CFDs, the moment ratio, and the loading times, are discussed. The test results show a bilinear behavior of the CLB rocking wall. The small residual displacements of the CLB rocking wall demonstrate an idealized… More > Graphic Abstract

Farah Akif¹, Kiran Sultan^2,*, Aqdas N. Malik¹, Ijaz M. Qureshi³, Saba Mahmood⁴

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2075-2093, 2021, DOI:10.32604/cmc.2021.016721

Abstract Conventional approach of dealing with more users per coverage area in cellular networks implies densifying the amount of (Access Point) AP which will eventually result in a larger carbon footprint. In this paper, we propose a base station off-loading and cell range extension (CRE) scheme based on multi-hop device-to-device (MHD2D) path selection between transmitter and receiver node. The paper also provides derivations of upper and lower bounds for energy efficiency, capacity, and transmit power. The proposed path selection scheme is inspired by the foraging behavior of honey bees. We present the algorithm as a modified variant of the artificial bee… More >

Maryam Rezai Rad¹, Sadra Mohaghegh², Farnaz Kouhestani³, Saeed Reza Motamedian^4,*

Molecular & Cellular Biomechanics, Vol.18, No.2, pp. 51-67, 2021, DOI:10.32604/mcb.2021.015136

Abstract This article is a scoping review of the studies that assessed the effect of mechanical forces on the behavior of dental stem cells (DSCs). PubMed and Scopus searches were done for in-vitro studies evaluating the effect of tension, hydrostatic pressure (i.e., the pressure applied through an incompressible fluid), compression, simulated microgravity, and vibration on DSCs. The following factors were analyzed: osteogenic/odontogenic differentiation, proliferation, adhesion and migration. Articles were reviewed according to the Preferred Reporting Items for Systematic Reviews extension for scoping reviews (PRISMA-ScR) guideline. Included studies were evaluated based on the modified Consolidated Standards of Reporting Trials (CONSORT). A total… More >