Ikhlas Ahmad¹, Haris Dildar¹, Wasi Ur Rehman Khan¹, Sadiq Ullah¹, Shakir Ullah¹, Mahmoud A. Albreem², Mohammed H. Alsharif³, Peerapong Uthansakul^4,*

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2563-2578, 2021, DOI:10.32604/cmc.2021.016813

Abstract In this paper, low profile frequency reconfigurable monopole antenna is designed on FR-4 substrate with a compact size of 30 mm³ × 20 mm³ × 1.6 mm³. The antenna is tuned to four different modes through three pin diode switches. In Mode 1 (SW1 to SW3 = OFF), antenna covers a wideband of 3.15–8.51 GHz. For Mode 2 (SW1 = ON, SW2 to SW3 = OFF), the proposed antenna resonates at 3.5 GHz. The antenna shows dual band behavior and covers 2.6 and 6.4 GHz in Mode 3 (SW1 and SW2 = ON, SW3 = OFF). The same antenna covers… More >

Bin Zhang¹, Muhammad Waqas^2,3, Shanshan Tu^2,*, Syed Mudassir Hussain⁴, Sadaqat Ur Rehman⁵

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2179-2188, 2021, DOI:10.32604/cmc.2021.016553

Abstract Secret key generation (SKG) is an emerging technology to secure wireless communication from attackers. Therefore, the SKG at the physical layer is an alternate solution over traditional cryptographic methods due to wireless channels’ uncertainty. However, the physical layer secret key generation (PHY-SKG) depends on two fundamental parameters, i.e., coherence time and power allocation. The coherence time for PHY-SKG is not applicable to secure wireless channels. This is because coherence time is for a certain period of time. Thus, legitimate users generate the secret keys (SKs) with a shorter key length in size. Hence, an attacker can quickly get information about… More >

Sarah Chaudhry¹, Fakhra Batool¹, Abdul Hafeez Muhammad¹, Ansar Siddique^2,*

Intelligent Automation & Soft Computing, Vol.28, No.2, pp. 379-395, 2021, DOI:10.32604/iasc.2021.016263

Abstract Information and Communications Technology (ICT) has revolutionized the healthcare leading to provision of eHealth facilities remotely. During the peak time of COVID-19, as the long queues at health care facilities can result in spread of the virus. ICT can play an effective role especially for reducing the extended waiting time of patients to consult a medical practitioner which is considered as a source of hazard during the pandemic. However, in developing countries where majority population is semiliterate so find difficulty when come into contact with appointment systems which are not particularly designed keeping in consideration the requirements of semiliterate users.… More >

Mohammed H. Alsharif¹, Abu Jahid², Mahmoud A. Albreem³, Peerapong Uthansakul^4,*, Jamel Nebhen⁵, Khalid Yahya⁶

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 1321-1339, 2021, DOI:10.32604/cmc.2021.016738

Abstract The design of green cellular networking according to the traffic arrivals has the capability to reduce the overall energy consumption to a cluster in a cost-effective way. The cell zooming approach has appealed much attention that adaptively offloads the BS load demands adjusting the transmit power based on the traffic intensity and green energy availability. Besides, the researchers are focused on implementing renewable energy resources, which are considered the most attractive practices in designing energy-efficient wireless networks over the long term in a cost-efficient way in the existing infrastructure. The utilization of available solar can be adapted to acquire cost-effective… More >

Rana Zeeshan Ahamad¹, Abdul Rehman Javed^2,*, Shakir Mehmood³, Mohammad Zubair Khan⁴, Abdulfattah Noorwali⁵, Muhammad Rizwan⁶

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 45-58, 2021, DOI:10.32604/cmc.2021.016082

Abstract Device to Device (D2D) communication is emerging as a new participant promising technology in 5G cellular networks to promote green energy networks. D2D communication can improve communication delays, spectral efficiency, system capacity, data off-loading, and many other fruitful scenarios where D2D can be implemented. Nevertheless, induction of D2D communication in reuse mode with the conventional cellular network can cause severe interference issues, which can significantly degrade network performance. To reap all the benefits of induction of D2D communication with conventional cellular communication, it is imperative to minimize interference’s detrimental effects. Efficient power control can minimize the negative effects of interference… More >

A. F. M. Suaib Akhter^1,*, A. F. M. Shahen Shah², Mohiuddin Ahmed³, Nour Moustafa⁴, Unal Çavuşoğlu¹, Ahmet Zengin¹

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 229-246, 2021, DOI:10.32604/cmc.2021.015447

Abstract Vehicular Ad hoc Networks (VANETs) become a very crucial addition in the Intelligent Transportation System (ITS). It is challenging for a VANET system to provide security services and parallelly maintain high throughput by utilizing limited resources. To overcome these challenges, we propose a blockchain-based Secured Cluster-based MAC (SCB-MAC) protocol. The nearby vehicles heading towards the same direction will form a cluster and each of the clusters has its blockchain to store and distribute the safety messages. The message which contains emergency information and requires Strict Delay Requirement (SDR) for transmission are called safety messages (SM). Cluster Members (CMs) sign SMs… More >

Sergio Rios-Aguilar^1,2,*, Marta Beltrán², González-Crespo Rubén³

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 2955-2969, 2021, DOI:10.32604/cmc.2021.014969

Abstract Radio Frequency IDentification (RFID) and related technologies such as Near Field Communication (NFC) are becoming essential in industrial contexts thanks to their ability to perform contactless data exchange, either device-to-device or tag-to-device. One of the three main operation modes of NFC, called read/write mode, makes use of the latter type of interaction. It is extensively used in business information systems that make use of NFC tags to provide the end-user with augmented information in one of several available NFC data exchange formats, such as plain text, simple URLs or enriched URLs. Using a wide variety of physical form factors, NFC-compatible… More >

Ishtiaq Wahid¹, Fasee Ullah^2,*, Masood Ahmad¹, Atif Khan³, M. Irfan Uddin⁴, Abdullah Alharbi⁵, Wael Alosaimi⁵

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 3949-3965, 2021, DOI:10.32604/cmc.2021.014190

Abstract In vehicular ad hoc networks (VANETs), the topology information (TI) is updated frequently due to vehicle mobility. These frequent changes in topology increase the topology maintenance overhead. To reduce the control message overhead, cluster-based routing schemes are proposed. In cluster-based routing schemes, the nodes are divided into different virtual groups, and each group (logical node) is considered a cluster. The topology changes are accommodated within each cluster, and broadcasting TI to the whole VANET is not required. The cluster head (CH) is responsible for managing the communication of a node with other nodes outside the cluster. However, transmitting real-time data… More >

Kaisarul Islam¹, Tabia Hossain¹, Mohammad Monirujjaman Khan^1,*, Mehedi Masud², Roobaea Alroobaea²

Computer Systems Science and Engineering, Vol.37, No.1, pp. 19-32, 2021, DOI:10.32604/csse.2021.015528

Abstract In this paper performance of three different designs of a 60 GHz high gain antenna for body-centric communication has been evaluated. The basic structure of the antenna is a slotted patch consisting of a rectangular ring radiator with passive radiators inside. The variation of the design was done by changing the shape of these passive radiators. For free space performance, two types of excitations were used—waveguide port and a coaxial probe. The coaxial probe significantly improved both the bandwidth and radiation efficiency. The center frequency of all the designs was close to 60 GHz with a bandwidth of more than… More >

Imtisal Qadeer^1,2, Muhammad Khurram Ehsan^3,*

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2619-2630, 2021, DOI:10.32604/cmc.2021.015641

Abstract To secure the wireless connection between devices with low computational power has been a challenging problem due to heterogeneity in operating devices, device to device communication in Internet of Things (IoTs) and 5G wireless systems. Physical layer key generation (PLKG) tackles this secrecy problem by introducing private keys among two connecting devices through wireless medium. In this paper, relative calibration is used as a method to enhance channel reciprocity which in turn increases the performance of the key generation process. Channel reciprocity based key generation is emerged as better PLKG methodology to obtain secure wireless connection in IoTs and 5G… More >