Home / Advanced Search

  • Title/Keywords

  • Author/Affliations

  • Journal

  • Article Type

  • Start Year

  • End Year

Update SearchingClear
  • Articles
  • Online
Search Results (8)
  • Open Access

    ARTICLE

    Genipin Cross-linked Boron Doped Hydrogels: Evaluation of Biological Activities

    ELIF ANT BURSALI1,*, DILER ABACI1, MURAT KIZIL2, MURUVVET YURDAKOC1

    Journal of Polymer Materials, Vol.38, No.3-4, pp. 231-245, 2021, DOI:10.32381/JPM.2021.38.3-4.5

    Abstract Genipin cross-linked/boron doped starch/polyvinily alcohol (PVA) based hydrogel (SH-GNP-B) was synthesized as a new material having antimicrobial and antioxidant activity. The prepared hydrogel was characterized by X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Thermal Gravimetric Analysis (TGA) and Scanning Electron Microscope (SEM) methods and evaluated for in vitro antimicrobial activities against selected organisms by disc diffusion tests. The antioxidant activity of the prepared hydrogels was evaluated using 2,2-diphenyl-1- picrylhydrazyl radical scavenging assays. Swelling behavior of the hydrogel was also investigated. The synthesized hydrogel was thermally stable and showed pH independent swelling tendency. SH-GNP-B hydrogel was found to have antimicrobial… More >

  • Open Access

    ARTICLE

    Cross-Linking of Sago Starch with Furan and Bismaleimide via the Diels-Alder Reaction

    Henky Muljana*, Ivana Hasjem, Merianawati Sinatra, Dicky Joshua Pesireron, Michael Wilbert Puradisastra, Ryan Hartono, Kevin Yovan Hermanto, Tony Handoko

    Journal of Renewable Materials, Vol.11, No.12, pp. 4039-4060, 2023, DOI:10.32604/jrm.2023.031261

    Abstract This research paper describes the synthesis of thermo-reversible cross-linking of sago starch by grafting a furan pendant group (methyl 2-furoate) onto the starch backbone, followed by a Diels-Alder (DA) reaction of the furan functional group with 1,1′-(methylenedi-4,1-phenylene) bismaleimide (BM). The proof of principles was provided by FTIR and 1H-NMR analyses. The relevant FTIR peaks are the carbonyl peak (υ C=O sym) at 1721 cm−1 ; the two peaks appeared after DA cross-linking, i.e., at 1510 cm−1 (corresponding to υ CH=CH BM aromatic rings, stretching vibrations), and at 1173 cm−1 (assigned to cycloadduct (C-O-C, δ DA ring)) while the 1H-NMR result… More > Graphic Abstract

    Cross-Linking of Sago Starch with Furan and Bismaleimide via the Diels-Alder Reaction

  • Open Access

    ARTICLE

    Preparation of Peanut Shell Cellulose Double-Network Hydrogel and Its Adsorption Capacity for Methylene Blue

    Yalin Li1,*, Lei Liu1, Wenbao Huang1, Junpu Xie2, Zhaoxia Song1, Shuna Guo1, Enci Wang1

    Journal of Renewable Materials, Vol.11, No.7, pp. 3001-3023, 2023, DOI:10.32604/jrm.2023.026604

    Abstract To achieve optimal recovery and value-added utilisation of cellulose in peanut shells, the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method. Then, cellulose hydrogel was prepared by graft copolymerisation using N, N’-methylenebisacrylamide as the cross-linking agent, sodium persulfate as the initiator, and acrylic acid as the monomer. Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g, initiator dosage of 0.20 g, polymerisation temperature of 70°C, cross-linking agent of 0.25 g, and monomer dosage of 3.0 mL. The effect of initiator dosage on hydrogel synthesis was… More > Graphic Abstract

    Preparation of Peanut Shell Cellulose Double-Network Hydrogel and Its Adsorption Capacity for Methylene Blue

  • Open Access

    ARTICLE

    Performance Analysis of a Profile Control Agent for Waste Drilling Fluid Treatment

    Xueyu Zhao*

    FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.7, pp. 1897-1905, 2023, DOI:10.32604/fdmp.2023.025247

    Abstract A method for the treatment of hazardous waste drilling fluids, potentially leading to environmental pollution, is considered. The waste drilling fluid is treated with an inorganic flocculant, an organic flocculant, and a pH regulator. The profile control agent consists of partially hydrolyzed polyacrylamide, formaldehyde, hexamethylenetetramine, resorcinol, phenol, and the treated waste drilling fluid itself. For a waste drilling fluid concentration of 2500 mg/L, the gelling time of the profile control agent is 25 h, and the gelling strength is 32,000 mPa.s. Compared with the profile control agent prepared by recirculated water under the same conditions, the present profile control agent displays better… More >

  • Open Access

    ARTICLE

    Three-month effects of corneal cross-linking on corneal fibroblasts

    XINYAN CHEN1,2, HAIXIA ZHANG1,2, LIN LI1,2,*

    BIOCELL, Vol.45, No.4, pp. 1023-1032, 2021, DOI:10.32604/biocell.2021.014873

    Abstract Corneal collagen crosslinking (CXL) has revolutionized the treatment of keratoconus in the past decade. In order to evaluate the 3-month effects of CXL on corneal fibroblasts, a longitudinal study at the tissue and cellular level was carried out with a total of 16 rabbits that underwent CXL, deepithelialization (DEP), or non-treatment (control) and kept for 1 to 3 months. The duration of corneal stromal remodeling after CXL was determined by examining the differentiation, apoptosis, and number changes of keratocytes in tissue sections from animals 1, 2, or 3 months post-treatment. Upon the finish of tissue remodeling, separate rabbits were used… More >

  • Open Access

    ARTICLE

    Covalent and Ionic Bonding between Tannin and Collagen in Leather Making and Shrinking: A MALDI-ToF Study

    Antonio Pizzi*

    Journal of Renewable Materials, Vol.9, No.8, pp. 1345-1364, 2021, DOI:10.32604/jrm.2021.015663

    Abstract Collagen powder hydrolysates were reacted with a solution of commercial mimosa bark tannin extract. The mixture was prepared at ambient temperature and prepared at 80°C to determine what reactions, if any, did occur between the collagen protein through its amino acids and the polyphenolic condensed tannin. The reaction products obtained were analyzed by matrix assisted laser desorption ionization time-of-flight (MALDI ToF) mass spectrometry. Reactions between the two materials did appear to occur, with the formation of a relatively small proportion of covalent and ionic linkages at ambient temperature but a considerable proportion of covalent linkages tannin-protein amino acids and the… More >

  • Open Access

    ABSTRACT

    Molecular Dynamics Simulations of Carbon Nanotubes Cross-Bonding by Proton Irradiation

    N. J. Lee, C.R. Welch1

    The International Conference on Computational & Experimental Engineering and Sciences, Vol.13, No.1, pp. 11-12, 2009, DOI:10.3970/icces.2009.013.011

    Abstract Carbon nanotubes have significant potential as the basis for super infrastructure material. The shear modulus of carbon nanotube ensembles is relatively low, comparable to graphite, as the carbon nanotubes interact via weak van der Waals forces. Unmodified, their intermolecular interactions are insufficient to take full advantage of the extraordinarily high strengths predicted for carbon nanotube-based fibers. Thus, a key to their use in high-strength materials is developing strong bonds between these molecules. In this study, we examine the potential development of covalent bonds between carbon nanotube pairs cross-bonded by proton bombardment using molecular dynamics simulation. Covalent bond formation between aligned… More >

  • Open Access

    ARTICLE

    Enzymatic Synthesis of Polycaprolactone: Effect of Immobilization Mechanism of CALB on Polycaprolactone Synthesis

    Yasemin Kaptan, M.Sc.1,*, Yüksel Avcıbaşı-Güvenilir1

    Journal of Renewable Materials, Vol.6, No.6, pp. 619-629, 2018, DOI:10.32604/JRM.2018.00142

    Abstract Surface-modified rice husk ash was used as an inorganic support material for immobilization of Candida antarctica lipase B. (3-aminopropyl) trimethoxysilane was used for surface modification. Immobilization of CALB was performed via both physical adsorption and cross-linking. PCL synthesis was carried out by using these immobilized enzymes, free enzyme and Novozyme 435®. Molecular weight distribution of polymer samples was obtained by gel permeation chromatography (GPC) and chain structures of the polymer samples were observed by hydrogen nuclear magnetic resonance (1H-NMR). The highest monomer conversion is generally obtained by using cross-linked enzyme, around 90%. PDI values for all polymer samples were approximately… More >

Displaying 1-10 on page 1 of 8. Per Page