Ahmed S. Almasoud¹, Siwar Ben Haj Hassine², Nadhem NEMRI², Fahd N. Al-Wesabi^2,3, Manar Ahmed Hamza^4,*, Anwer Mustafa Hilal⁴, Abdelwahed Motwakel⁴, Mesfer Al Duhayyim⁵

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 5311-5325, 2022, DOI:10.32604/cmc.2022.024500 - 14 January 2022

Abstract The sixth-generation (6G) wireless communication networks are anticipated in integrating aerial, terrestrial, and maritime communication into a robust system to accomplish trustworthy, quick, and low latency needs. It enables to achieve maximum throughput and delay for several applications. Besides, the evolution of 6G leads to the design of unmanned aerial vehicles (UAVs) in providing inexpensive and effective solutions in various application areas such as healthcare, environment monitoring, and so on. In the UAV network, effective data collection with restricted energy capacity poses a major issue to achieving high quality network communication. It can be addressed… More >

Saeed Ahmed^1,2, Noor Gul^1,3, Jahangir Khan⁴, Junsu Kim¹, Su Min Kim^1,*

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 5061-5082, 2022, DOI:10.32604/cmc.2022.023639 - 14 January 2022

Abstract Flash floods are deemed the most fatal and disastrous natural hazards globally due to their prompt onset that requires a short prime time for emergency response. Cognitive Internet of things (CIoT) technologies including inherent characteristics of cognitive radio (CR) are potential candidates to develop a monitoring and early warning system (MEWS) that helps in efficiently utilizing the short response time to save lives during flash floods. However, most CIoT devices are battery-limited and thus, it reduces the lifetime of the MEWS. To tackle these problems, we propose a CIoT-based MEWS to slash the fatalities of… More >

Thirumoorthy Palanisamy^1,*, Daniyal Alghazzawi², Surbhi Bhatia³, Areej Abbas Malibari², Pankaj Dadheech⁴, Sudhakar Sengan⁵

Intelligent Automation & Soft Computing, Vol.33, No.1, pp. 227-244, 2022, DOI:10.32604/iasc.2022.023692 - 05 January 2022

Abstract Wireless Sensor Networks (WSNs) are spatially distributed to independent sensor networks that can sense physical characteristics such as temperature, sound, pressure, energy, and so on. WSNs have secure link to physical environment and robustness. Data Aggregation (DA) plays a key role in WSN, and it helps to minimize the Energy Consumption (EC). In order to have trustworthy DA with a rate of high aggregation for WSNs, the existing research works have focused on Data Routing for In-Network Aggregation (DRINA). Yet, there is no accomplishment of an effective balance between overhead and routing. But EC required… More >

Jui-Hsiang Kao^*, Yi-Fan Liao

CMES-Computer Modeling in Engineering & Sciences, Vol.130, No.3, pp. 1325-1348, 2022, DOI:10.32604/cmes.2022.016212 - 30 December 2021

Abstract This paper focuses on the ducted propulsion with the accelerating nozzle, and discusses the influence of its fluid acceleration quality on its propulsive performances, including the hull efficiency, the relative rotative efficiency, the effective wake, and the thrust deduction factor. An actual ducted propulsion system is used as an example for computational analysis. The computational conditions are divided into four combinations, which are provided with different propeller pitches, cambers, and duct lengths. The method applied in this study is the Computational Fluid Dynamics (CFD) technology, and the contents of the calculation include the hull's viscous… More >

Jian Song^*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.2, pp. 345-354, 2022, DOI:10.32604/fdmp.2022.017382 - 16 December 2021

Abstract Computational Fluid Dynamics is used to assess the thermal (heat transfer) performances of an automobile engine considering different grille opening and closing degrees. For this purpose the entire vehicle is modelled and three fundamental aspects are examined, namely, the open area of the air intake grille, the position of the upper and lower grilles and their shape. The results show that the opening area and position of the grille have some influence also on the aerodynamic characteristics of the automobile. With an increase in the opening angle of the grille, the C_D (Drag Coefficient) value of More >

D. Anuradha^1,*, R. Srinivasan², T. Ch. Anil Kumar³, J. Faritha Banu⁴, Aditya Kumar Singh Pundir⁵, D. Vijendra Babu⁶

Intelligent Automation & Soft Computing, Vol.32, No.3, pp. 1325-1341, 2022, DOI:10.32604/iasc.2022.021946 - 09 December 2021

Abstract Wireless sensor network (WSN) becomes a hot research area owing to an extensive set of applications. In order to accomplish energy efficiency in WSN, most of the earlier works have focused on the clustering process which enables to elect CHs and organize unequal clusters. However, the clustering process results in hot spot problem and can be addressed by the use of unequal clustering techniques, which enables to construct of clusters of unequal sizes to equalize the energy dissipation in the WSN. Unequal clustering can be formulated as an NP-hard issue and can be solved by… More >

E. Elamaran^1,*, B. Sudhakar²

Intelligent Automation & Soft Computing, Vol.32, No.3, pp. 1467-1477, 2022, DOI:10.32604/iasc.2022.020625 - 09 December 2021

Abstract Essential components in wireless systems are schedulin and resource allocation. The problems in scheduling refers to inactive users in a given time slot and in terms of resource allocation it refers to the issues in the allocation of physical layer resources such as power and bandwidth among the active users. In the Long Time Evolution (LTE) downlink scheduling the optimized problem refers to the flow deadlines that incorporate the formulation in the surveyed scheduling algorithm for achieving enhanced performance levels. The major challenges appear in the areas of quality and bandwidth constrains in the video… More >

Yajun Li^1,#, Yumeng Cui^1,#, Bingjie Wang¹, Yue Li¹, Mengmeng Zhang², Silan Dai¹, He Huang^1,*

Phyton-International Journal of Experimental Botany, Vol.91, No.4, pp. 869-888, 2022, DOI:10.32604/phyton.2022.018659 - 09 December 2021

Abstract Genetic transformation is one of the key steps in the molecular breeding of chrysanthemum, which relies on an optimal regeneration and transformation system. However, the regeneration system of different chrysanthemum cultivars varies, and the regeneration time of most cultivars is long. To screen cultivars with highly efficient regeneration, leaves and shoot tip thin cell layers (tTCL) from eight chrysanthemum cultivars with different flower colors and flower types were cultured on Murashige and Skoog media (MS) supplemented with 1.0–5.0 mg L⁻¹ 6-benzylaminopurine (6-BA) and 0.1–1.0 mg L⁻¹ α-naphthaleneacetic (NAA). The results showed that the most efficient regeneration… More >

Zhenghua Yi¹, Paramsothy Jeyakumar², Jiang Jiang¹, Xiaomian Zhang³, Chunlei Yue³, Haijun Sun^1,*

Phyton-International Journal of Experimental Botany, Vol.91, No.4, pp. 859-868, 2022, DOI:10.32604/phyton.2022.018396 - 09 December 2021

Abstract We conducted a pot experiment to examine the feasibility of applying a reaction-finished solution of hydrochar (HRFS) to enhance rice production in a saline soil. With this purpose, HRFS was applied (0, 10, 20, 40, 60, 80 and 100 mL/pot) and rice yield and nitrogen (N) use efficiency (NUE) were determined. HRFS application significantly (P < 0.05) increased rice grain yield by 19.6%–30.0% compared to the control treatment (CKU, with N but without HRFS addition). Moreover, HRFS application promoted plant height and straw biomass of rice. Increases of rice yield were mainly achieved by increases in the number… More >

A. Arokiaraj Jovith¹, Mahantesh Mathapati², M. Sundarrajan³, N. Gnanasankaran⁴, Seifedine Kadry⁵, Maytham N. Meqdad⁶, Shabnam Mohamed Aslam^7,*

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3375-3392, 2022, DOI:10.32604/cmc.2022.022668 - 07 December 2021

Abstract In recent times, Internet of Things (IoT) has become a hot research topic and it aims at interlinking several sensor-enabled devices mainly for data gathering and tracking applications. Wireless Sensor Network (WSN) is an important component in IoT paradigm since its inception and has become the most preferred platform to deploy several smart city application areas like home automation, smart buildings, intelligent transportation, disaster management, and other such IoT-based applications. Clustering methods are widely-employed energy efficient techniques with a primary purpose i.e., to balance the energy among sensor nodes. Clustering and routing processes are considered… More >