Saurabh Awasthi^*, Gagan Singh, Nafees Ahamad

Energy Engineering, Vol.120, No.4, pp. 811-829, 2023, DOI:10.32604/ee.2023.026863

Abstract A distributed generation system (DG) has several benefits over a traditional centralized power system. However, the protection area in the case of the distributed generator requires special attention as it encounters stability loss, failure re-closure, fluctuations in voltage, etc. And thereby, it demands immediate attention in identifying the location & type of a fault without delay especially when occurred in a small, distributed generation system, as it would adversely affect the overall system and its operation. In the past, several methods were proposed for classification and localisation of a fault in a distributed generation system. Many of those methods were… More >

Imran Khan¹, Firdaus Muhammad-Sukki², Jorge Alfredo Ardila Rey³, Abdullahi Abubakar Mas’ud⁴, Saud Jazaa Alshammari⁴, Dag Øivind Madsen^5,*

Intelligent Automation & Soft Computing, Vol.36, No.2, pp. 1979-1989, 2023, DOI:10.32604/iasc.2023.034106

Abstract Energy sustainability is a hot topic in both scientific and political circles. To date, two alternative approaches to this issue are being taken. Some people believe that increasing power consumption is necessary for countries’ economic and social progress, while others are more concerned with maintaining carbon consumption under set limitations. To establish a secure, sustainable, and economical energy system while mitigating the consequences of climate change, most governments are currently pushing renewable growth policies. Energy markets are meant to provide consumers with dependable electricity at the lowest possible cost. A profit-maximization optimal decision model is created in the electric power… More >

Mehrdad Ahmadi Kamarposhti^1,*, Ilhami Colak², Phatiphat Thounthong³, Kei Eguchi⁴

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 4547-4570, 2023, DOI:10.32604/cmc.2023.034082

Abstract The present study suggests that series voltage injection is more effective than parallel current injection to improve voltage quality on the load side. The line voltage can be accurately symmetrized at the connection point by creating and controlling a series voltage component in each phase. This is more reliable and effective than parallel current injection. A dynamic voltage restorer (DVR) and a distribution static synchronous compensator (DSTATCOM) were utilized to provide the required power. The DVR is an effective and modern device utilized in parallel within the grid and can protect sensitive loads from voltage problems in the grid by… More >

Song Zhang¹, Wensheng Li², Zhao Li², Xiaolei Zhang¹, Zhipeng Lu¹, Xiaoning Ge^3,*

Energy Engineering, Vol.120, No.1, pp. 181-199, 2023, DOI:10.32604/ee.2022.022228

Abstract Driven by the goal of “carbon neutrality” and “emission peak”, effectively controlling system carbon emissions has become significantly important to governments around the world. To this end, a novel two-stage low-carbon economic scheduling framework that considers the coordinated optimization of ladder-type carbon trading and integrated demand response (IDR) is proposed in this paper for the integrated energy system (IES), where the first stage determines the energy consumption plan of users by leveraging the price-based electrical-heat IDR. In contrast, the second stage minimizes the system total cost to optimize the outputs of generations with consideration of the uncertainty of renewables. In… More >

Zhukui Tan^1,*, Yongjie Ren¹, Hua Li¹, Weili Ren², Xichao Zhou², Ming Zeng¹

Energy Engineering, Vol.119, No.6, pp. 2607-2619, 2022, DOI:10.32604/ee.2022.019550

Abstract With the proposal of carbon neutrality, how to improve the proportion of clean energy in energy consumption and reduce carbon dioxide emissions has become the important challenge for the traditional energy industry. Based on the idea of multi-energy complementarity, a typical integrated energy system consisting of electric system and gas system is constructed based on the application of power to gas (P2G) technology and gas turbine in this paper. Furthermore, a multi-objective optimization model with economic improvement, carbon emission reduction and peak-load shifting as objectives is proposed, and solved by BSO algorithm. Finally, a typical power-gas coupling system is selected… More >

Helen Josephine V L¹, Ramchand Vedaiyan², V. M. Arul Xavier³, Joy Winston J⁴, A. Jegatheesan⁵, D. Lakshmi⁶, Joshua Samuel Raj^7,*

Computer Systems Science and Engineering, Vol.45, No.1, pp. 701-714, 2023, DOI:10.32604/csse.2023.030611

Abstract The Internet of Things (IoT) technologies has gained significant interest in the design of smart grids (SGs). The increasing amount of distributed generations, maturity of existing grid infrastructures, and demand network transformation have received maximum attention. An essential energy storing model mostly the electrical energy stored methods are developing as the diagnoses for its procedure was becoming further compelling. The dynamic electrical energy stored model using Electric Vehicles (EVs) is comparatively standard because of its excellent electrical property and flexibility however the chance of damage to its battery was there in event of overcharging or deep discharging and its mass… More >

N. Kanagaraj^*, Mohammed Al-Ansi

Computer Systems Science and Engineering, Vol.45, No.1, pp. 769-784, 2023, DOI:10.32604/csse.2023.029457

Abstract In this research, a modified fractional order proportional integral derivate (FOPID) control method is proposed for the photovoltaic (PV) and thermoelectric generator (TEG) combined hybrid renewable energy system. The faster tracking and steady-state output are aimed at the suggested maximum power point tracking (MPPT) control technique. The derivative order number (µ) value in the improved FOPID (also known as PI^λD^µ) control structure will be dynamically updated utilizing the value of change in PV array voltage output. During the transient, the value of µ is changeable; it’s one at the start and after reaching the maximum power point (MPP), allowing for… More >

Anwer Mustafa Hilal^1,2,*, Aisha Hassan Abdalla Hashim¹, Heba G. Mohamed³, Mohammad Alamgeer^4,5, Mohamed K. Nour⁶, Anas Abdelrahman⁷, Abdelwahed Motwakel²

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 6019-6035, 2022, DOI:10.32604/cmc.2022.031425

Abstract Smart Grid (SG) technologies enable the acquisition of huge volumes of high dimension and multi-class data related to electric power grid operations through the integration of advanced metering infrastructures, control systems, and communication technologies. In SGs, user demand data is gathered and examined over the present supply criteria whereas the expenses are then informed to the clients so that they can decide about electricity consumption. Since the entire procedure is valued on the basis of time, it is essential to perform adaptive estimation of the SG’s stability. Recent advancements in Machine Learning (ML) and Deep Learning (DL) models enable the… More >

Bo Yang¹, Zhengxun Guo¹, Jingbo Wang^1,*, Chao Duan², Yaxing Ren³, Yixuan Chen⁴

Energy Engineering, Vol.119, No.5, pp. 1789-1795, 2022, DOI:10.32604/ee.2022.022217

Abstract This article has no abstract. More >

Jiusong Chen^1,*, Dejun Miao¹, Yizong Dai¹, Mojtaba Ghadamyari^2,*

Energy Engineering, Vol.119, No.5, pp. 1985-2003, 2022, DOI:10.32604/ee.2022.021142

Abstract Electric vehicles (EVs) have received special consideration from modern society over the past several years. Although EVs are a fine example of environmentally friendly technology and have many advantages, they relatively increase the electricity demand upon a power grid as well. Therefore, their negative impact on busvoltage and line losses should be analyzed. In this study, the effect of EV loads and their penetration on bus voltage and line losses of an IEEE-33 bussystem has been examined via two scenarios. It is important to mention that the effect of EVs on the rate of air pollution, produced by fossil fuel… More >