Gulsah Karaduman^*, Mehmet Karakose, Ilhan Aydin, Erhan Akin

Intelligent Automation & Soft Computing, Vol.26, No.3, pp. 455-463, 2020, DOI:10.32604/iasc.2020.013922

Abstract The use of railways has continually increased with high-speed trains. The increased speed and usage wear on the rails poses a serious problem. In recent years, to detect wear and cracks in the rails, image-based detection methods have been developed. In this paper, wears on the surface of railheads are detected by contactless image processing and image analysis techniques. The shadow removal algorithm with a minimal entropy method is implemented onto the noise-free images to eliminate the light variations that can occur on the rail. The Hough transform is applied on the noise and shadow free image in order to… More >

Jun Ye

Intelligent Automation & Soft Computing, Vol.24, No.1, pp. 1-8, 2018, DOI:10.1080/10798587.2016.1261955

Abstract This paper proposes a dimension root distance and its similarity measure of single-valued neutrosophic sets (SVNSs), and then develops the fault diagnosis method of hydraulic turbine by using the dimension root similarity measure of SVNSs. By the similarity measures between the fault diagnosis patterns and a testing sample with single-valued neutrosophic information and the relation indices, we can determine the main fault type and the ranking order of various vibration faults for predicting some possible fault trend. Then, the comparison of the fault diagnoses of hydraulic turbine based of the proposed dimension root similarity measure and the existing cotangent similarity… More >

Suhas S. Aralikatti¹, K. N. Ravikumar¹, Hemantha Kumar^1,*, H. Shivananda Nayaka¹, V. Sugumaran²

Structural Durability & Health Monitoring, Vol.14, No.2, pp. 127-145, 2020, DOI:10.32604/sdhm.2020.07595

Abstract The state of cutting tool determines the quality of surface produced on the machined parts. A faulty tool produces poor surface, inaccurate geometry and non-economic production. Thus, it is necessary to monitor tool condition for a machining process to have superior quality and economic production. In the present study, fault classification of single point cutting tool for hard turning has been carried out by employing machine learning technique. Cutting force and vibration signals were acquired to monitor tool condition during machining. A set of four tooling conditions namely healthy, worn flank, broken insert and extended tool overhang have been considered… More >

Xiaoping Zhao^{1, 4}, Yifei Wang^{2, *}, Yonghong Zhang², Jiaxin Wu¹, Yunqing Shi³

CMC-Computers, Materials & Continua, Vol.64, No.1, pp. 571-587, 2020, DOI:10.32604/cmc.2020.06363

Abstract Stochastic resonance can use noise to enhance weak signals, effectively reducing the effect of noise signals on feature extraction. In order to improve the early fault recognition rate of rolling bearings, and to overcome the shortcomings of lack of interaction in the selection of SR (Stochastic Resonance) method parameters and the lack of validation of the extracted features, an adaptive genetic random resonance early fault diagnosis method for rolling bearings was proposed. compared with the existing methods, the AGSR (Adaptive Genetic Stochastic Resonance) method uses genetic algorithms to optimize the system parameters, and further optimizes the parameters while considering the… More >

Kun Zhu¹, Shi Ying^{1, *}, Nana Zhang¹, Rui Wang¹, Yutong Wu¹, Gongjin Lan², Xu Wang²

CMC-Computers, Materials & Continua, Vol.62, No.3, pp. 1161-1185, 2020, DOI:10.32604/cmc.2020.05247

Abstract SaaS software that provides services through cloud platform has been more widely used nowadays. However, when SaaS software is running, it will suffer from performance fault due to factors such as the software structural design or complex environments. It is a major challenge that how to diagnose software quickly and accurately when the performance fault occurs. For this challenge, we propose a novel performance fault diagnosis method for SaaS software based on GBDT (Gradient Boosting Decision Tree) algorithm. In particular, we leverage the monitoring mean to obtain the performance log and warning log when the SaaS software system runs, and… More >

A. Joshuva^1,*, V. Sugumaran²

Structural Durability & Health Monitoring, Vol.13, No.4, pp. 399-416, 2019, DOI:10.32604/sdhm.2019.03014

Abstract Wind energy is considered as a alternative renewable energy source due to its low operating cost when compared with other sources. The wind turbine is an essential system used to change kinetic energy into electrical energy. Wind turbine blades, in particular, require a competitive condition inspection approach as it is a significant component of the wind turbine system that costs around 20-25 percent of the total turbine cost. The main objective of this study is to differentiate between various blade faults which affect the wind turbine blade under operating conditions using a machine learning approach through histogram features. In this… More >

Yixiong Yu^*

Sound & Vibration, Vol.53, No.5, pp. 237-243, 2019, DOI:10.32604/sv.2019.07887

Abstract Mining aeroengine operational data and developing fault diagnosis models for aeroengines are to avoid running aeroengines under undesired conditions. Because of the complexity of working environment and faults of aeroengines, it is unavoidable that the monitored parameters vary widely and possess larger noise levels. This paper reports the extrapolation of a diagnosis model for 20 gas path faults of a double-spool turbofan civil aeroengine. By applying support vector machine (SVM) algorithm together with genetic algorithm (GA), the fault diagnosis model is obtained from the training set that was based on the deviations of the monitored parameters superimposed with the noise… More >

R. Jegadeeshwaran¹, V. Sugumaran², K.P. Soman³

Structural Durability & Health Monitoring, Vol.10, No.1, pp. 81-97, 2014, DOI:10.3970/sdhm.2014.010.081

Abstract In automobile, brake system is an essential part responsible for control of the vehicle. Vibration signals of a rotating machine contain the dynamic information about its health condition. Many research papers have reported the suitability of vibration signals for fault diagnosis applications. Many of them are based on (Fast Fourier Transform) FFT, which have their own drawback with nonstationary signals. Hence, there is a need for development of new methodologies to infer diagnostic information from such non stationary signals. This paper uses vibration signals acquired from a hydraulic brake system under good and simulated faulty conditions for the purpose of… More >

Akhil Muralidharan^1,2, V. Sugumaran¹, K.P Soman³, M. Amarnath⁴

Structural Durability & Health Monitoring, Vol.10, No.1, pp. 55-80, 2014, DOI:10.3970/sdhm.2014.010.055

Abstract Gears are machine elements that transmit motion by means of successively engaging teeth. In purely scientific terms, gears are used to transmit motion. A faulty gear is a matter of serious concern as it affects the functionality of a machine to a great extent. Thus it is essential to diagnose the faults at an initial stage so as to reduce the losses that might be incurred. This necessitates the need for continuous monitoring of the gears. The vibrations produced by gears from good and simulated faulty conditions can be effectively used to detect the faults in these gears. The introduction… More >

Jinshan Lin^a*, Chunhong Dou^b, Qianqian Wang^a

Sound & Vibration, Vol.52, No.2, pp. 11-15, 2018, DOI:10.32604/sv.2018.03653

Abstract A method for gearbox fault diagnosis consists of feature extraction and fault identification. Many methods for feature extraction have been devised for exposing nature of vibration data of a defective gearbox. In addition, features extracted from gearbox vibration data are identified by various classifiers. However, existing literatures leave much to be desired in assessing performance of different combinatorial methods for gearbox fault diagnosis. To this end, this paper evaluated performance of several typical combinatorial methods for gearbox fault diagnosis by associating each of multifractal detrended fluctuation analysis (MFDFA), empirical mode decomposition (EMD) and wavelet transform (WT) with each of neural… More >