Mrim M. Alnfiai^*

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 3763-3780, 2023, DOI:10.32604/cmc.2023.033448

Abstract Developments in data storage and sensor technologies have allowed the cumulation of a large volume of data from industrial systems. Both structural and non-structural data of industrial systems are collected, which covers data formats of time-series, text, images, sound, etc. Several researchers discussed above were mostly qualitative, and ceratin techniques need expert guidance to conclude on the condition of gearboxes. But, in this study, an improved symbiotic organism search with deep learning enabled fault diagnosis (ISOSDL-FD) model for gearbox fault detection in industrial systems. The proposed ISOSDL-FD technique majorly concentrates on the identification and classification of faults in the gearbox… More >

Rao Fu^1,*, Liming Wang², Xuesong Huo², Pei Pei², Haitao Jiang³, Zhongxing Fu⁴

Energy Engineering, Vol.119, No.6, pp. 2621-2636, 2022, DOI:10.32604/ee.2022.020873

Abstract The power infrastructure of the power system is massive in size and dispersed throughout the system. Therefore, how to protect the information security in the operation and maintenance of power equipment is a difficult problem. This paper proposes an improved time-stamped blockchain technology biometric fuzzy feature for electrical equipment maintenance. Compared with previous blockchain transactions, the time-stamped fuzzy biometric signature proposed in this paper overcomes the difficulty that the key is easy to be stolen by hackers and can protect the security of information during operation and maintenance. Finally, the effectiveness of the proposed method is verified by experiments. More >

Sihua Wang^1,2, Wenhui Zhang^1,2,*, Gaofei Zheng^1,2, Xujie Li^1,2, Yougeng Zhao^1,2

Energy Engineering, Vol.119, No.6, pp. 2431-2445, 2022, DOI:10.32604/ee.2022.020779

Abstract In order to improve the condition monitoring and fault diagnosis of wind turbines, a stacked noise reduction autoencoding network based on group normalization is proposed in this paper. The network is based on SCADA data of wind turbine operation, firstly, the group normalization (GN) algorithm is added to solve the problems of stack noise reduction autoencoding network training and slow convergence speed, and the RMSProp algorithm is used to update the weight and the bias of the autoenccoder, which further optimizes the problem that the loss function swings too much during the update process. Finally, in the last layer of… More >

Nabanita Dutta¹, Palanisamy Kaliannan^1,*, Paramasivam Shanmugam²

Intelligent Automation & Soft Computing, Vol.35, No.3, pp. 2997-3020, 2023, DOI:10.32604/iasc.2023.028704

Abstract Vibration failure in the pumping system is a significant issue for industries that rely on the pump as a critical device which requires regular maintenance. To save energy and money, a new automated system must be developed that can detect anomalies at an early stage. This paper presents a case study of a machine learning (ML)-based computational technique for automatic fault detection in a cascade pumping system based on variable frequency drive (VFD). Since the intensity of the vibrational effect depends on which axis has the most significant effect, a three-axis accelerometer is used to measure it in the pumping… More >

Majid Hussain^1,2,*, Tayab Din Memon^3,4, Imtiaz Hussain⁵, Zubair Ahmed Memon³, Dileep Kumar²

CMES-Computer Modeling in Engineering & Sciences, Vol.133, No.2, pp. 435-470, 2022, DOI:10.32604/cmes.2022.020583

Abstract Owing to the 4.0 industrial revolution condition monitoring maintenance is widely accepted as a useful approach to avoiding plant disturbances and shutdown. Recently, Motor Current Signature Analysis (MCSA) is widely reported as a condition monitoring technique in the detection and identification of individual and multiple Induction Motor (IM) faults. However, checking the fault detection and classification with deep learning models and its comparison among themselves or conventional approaches is rarely reported in the literature. Therefore, in this work, we present the detection and identification of induction motor faults with MCSA and three Deep Learning (DL) models namely MLP, LSTM, and… More >

D. Maincer^1,*, Y. Benmahamed², M. Mansour¹, Mosleh Alharthi³, Sherif S. M. Ghonein³

Intelligent Automation & Soft Computing, Vol.35, No.2, pp. 1957-1969, 2023, DOI:10.32604/iasc.2023.029210

Abstract In this paper, Support Vector Machine (SVM) and K-Nearest Neighbor (KNN) based methods are to be applied on fault diagnosis in a robot manipulator. A comparative study between the two classifiers in terms of successfully detecting and isolating the seven classes of sensor faults is considered in this work. For both classifiers, the torque, the position and the speed of the manipulator have been employed as the input vector. However, it is to mention that a large database is needed and used for the training and testing phases. The SVM method used in this paper is based on the Gaussian… More >

E. Akshay¹, V. Sugumaran^1,*, M. Elangovan²

Structural Durability & Health Monitoring, Vol.16, No.3, pp. 255-270, 2022, DOI:10.32604/sdhm.2022.0271

Abstract Tool wear is inevitable in daily machining process since metal cutting process involves the chip rubbing the tool surface after it has been cut by the tool edge. Tool wear dominantly influences the deterioration of surface finish, geometric and dimensional tolerances of the workpiece. Moreover, for complete utilization of cutting tools and reduction of machine downtime during the machining process, it becomes necessary to understand the development of tool wear and predict its status before happening. In this study, tool condition monitoring system was used to monitor the behavior of a single point cutting tool to predict flank wear. A… More >

Letao Gao^1,*, Xiaoming Wang², Tao Wang³, Mengyu Chang⁴

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 4741-4754, 2022, DOI:10.32604/cmc.2022.027204

Abstract In the research field of bearing fault diagnosis, classical deep learning models have the problems of too many parameters and high computing cost. In addition, the classical deep learning models are not effective in the scenario of small data. In recent years, deep forest is proposed, which has less hyper parameters and adaptive depth of deep model. In addition, weighted deep forest (WDF) is proposed to further improve deep forest by assigning weights for decisions trees based on the accuracy of each decision tree. In this paper, weighted deep forest model-based bearing fault diagnosis method (WDBM) is proposed. The WDBM… More >

Saqlain Abbas^1,2,*, Zulkarnain Abbas³, Xiaotong Tu⁴, Yanping Zhu¹

Journal on Artificial Intelligence, Vol.3, No.3, pp. 97-113, 2021, DOI:10.32604/jai.2021.023020

Abstract The performance and reliability of structural components are greatly influenced by the presence of any abnormality in them. To this purpose, structural health monitoring (SHM) is recognized as a necessary tool to ensure the safety precautions and efficiency of both mechanical and civil infrastructures. Till now, most of the previous work has emphasized the functioning of several SHM techniques and systematic changes in SHM execution. However, there exist insufficient data in the literature regarding the patent-based technological developments in the SHM research domain which might be a useful source of detailed information for worldwide research institutes. To address this research… More >

Xiaolei Li^*

Energy Engineering, Vol.119, No.2, pp. 665-680, 2022, DOI:10.32604/ee.2022.019292

Abstract Aiming at the difficulty of rolling bearing fault diagnosis of wind turbine under noise environment, a new bearing fault identification method based on the Improved Anti-noise Residual Shrinkage Network (IADRSN) is proposed. Firstly, the vibration signals of wind turbine rolling bearings were preprocessed to obtain data samples divided into training and test sets. Then, a bearing fault diagnosis model based on the improved anti-noise residual shrinkage network was established. To improve the ability of fault feature extraction of the model, the convolution layer in the deep residual shrinkage network was replaced with a Dense-Net layer. To further improve the anti-noise… More >