Zhenqing Shi¹, Guomin Sun¹, Jianyong Pang^2,*

Structural Durability & Health Monitoring, Vol.17, No.3, pp. 239-255, 2023, DOI:10.32604/sdhm.2023.022816

Abstract Applying recycled concrete for engineered projects not only protects the ecological environment but also improves the utilization rate of waste concrete to satisfy sustainable development requirements. However, the mechanical properties of recycled concrete are not as good as those of ordinary concrete. To enhance the former’s performance and increase its popularity and application in engineering fields, notable advances have been made by using steel, synthetic, plant, and mineral fiber materials. These materials are added to recycled concrete to improve its mechanical properties. Studies have shown that (1) steel fibers have a distinct reinforcing effect and improve the strength, toughness, and… More >

Amnart Boonloi^a, Withada Jedsadaratanachai^b,*

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-11, 2019, DOI:10.5098/hmt.13.28

Abstract This paper presents the numerical investigations (finite volume method with SIMPLE algorithm) on flow structure, heat transfer behavior and performance assessment in heat exchanger square channel placed with 30o inclined square ring (ISR). The influences of ring size and placement on flow and heat transfer characteristics are considered for laminar flow region with the Reynolds number in the range around 100 – 2000. The purpose for the insertion of the ISR in the square channel is to induce the vortex flow and also increase the turbulent mixing. The numerical result reveals that the ring size and location have effects for… More >

Yongbin Zhang^*

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-6, 2019, DOI:10.5098/hmt.13.27

Abstract A multiscale analysis is carried out for the pressure driven flow rate through a micro/nano slit pore when the adsorbed layer-fluid interfacial slippage is considered. The flow of the adsorbed layer on the channel wall is described by the flow factor approach model for nanoscale flow, and the flow of the continuum fluid intermediate between the two adsorbed layers is described by a continuum fluid model. The adsorbed layer-fluid interfacial slippage is considered, while the adsorbed layer-wall surface interfacial slippage is ignored. The weak, medium-level and strong fluid-wall interactions and the solid adsorbed layer assumption are respectively taken. It is… More >

Heng-Pin Hsu^a , Chuo-Jeng Huang^b,*, Herchang Ay^a

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-8, 2019, DOI:10.5098/hmt.13.14

Abstract The heat and mass transfer characteristics of the influence of uniform blowing/suction and MHD (magnetohydrodynamic) on the free convection of non-Newtonian fluids over a vertical plate in porous media with internal heat generation and Soret/Dufour effects are numerically analyzed. The surface of the vertical plate has a uniform wall temperature and uniform wall concentration (UWT/UWC). The numerical modeling of this problem attracts considerable attention, owing to its practical applications in biological sciences, electronic cooling, advanced nuclear systems, etc. The transformed governing equations are solved by Keller box method. Comparisons showed excellent agreement with the numerical data in previous works. Numerical… More >

Zhiyuan Yao^1,2,3, Jing Sun^1,2,3,*, Dehua Liu^1,2,3

Energy Engineering, Vol.120, No.8, pp. 1853-1866, 2023, DOI:10.32604/ee.2023.025846

Abstract Shale gas reservoirs have poor physical properties and a large number of micro-nano pores have been developed. Shale gas wells have no natural productivity and need fracturing reconstruction measures to put into production. However, the fracturing fluid will enter the reservoir space of shale matrix after fracturing and affect the production of shale gas. At present, there is no consensus on the influence of fracturing fluid retention on gas well production. Based on this, the paper adopts gas molecular transport analyzer to carry out experimental research on the influence of fracturing fluid on shale gas diffusion law after entering matrix… More >

Kolli Vijaya^a,* , G. Venkata Ramana Reddy^a

Frontiers in Heat and Mass Transfer, Vol.14, pp. 1-8, 2020, DOI:10.5098/hmt.14.12

Abstract Present investigation aims at analyzing the properties of heat and transport phenomena of thermal energy and species mass in a non-Darcy Casson fluid flow induced by a erected porous elongated surface considering the effect of non-linear radioactive heat, thermophorosis, first order chemical reaction, Newtonian heating, thermo diffusion, permeability and slip conditions. Influence of critical parameters are widely studied. By inducing the variables of similarity the basic boundary layer equations are transmuted into dimensionless equations and are resolved arithmetically using Runge – Kutta – Fehlberg shooting techniques method. The dominance of critical parameters against velocity, temperature, and concentration are explicated through… More >

N. Vijaya^a,*, Sunil Babu G^b , Vellanki Lakshmi N^c

Frontiers in Heat and Mass Transfer, Vol.15, pp. 1-8, 2020, DOI:10.5098/hmt.15.23

Abstract Present investigation aims at scrutinizing the properties of heat and mass transfer phenomena of liquid thin film of Casson Nano fluid over elongated sheet under the influence of thermophorosis and Brownian motion. Casson Nano particle effect on thermophorotic force and on Brownian force is studied. Variables of similarity were induced to transmute partial differential equations into dimensionless equations and are resolved numerically by elegant method bvp 4c. Thin film thickness is calculated using MATHEMATICA for different values of critical parameters. Velocity profiles diminishes for higher values of Casson parameter and magnetic field parameter. The temperature escalates for higher values of… More >

Yuquan Huang^1,2, Fan Wei¹, Qing Ma², Yang Lin¹, Jinpeng Huang², Yanxia Zhu^1,*, Danfeng Tang^1,*

Phyton-International Journal of Experimental Botany, Vol.92, No.7, pp. 2105-2116, 2023, DOI:10.32604/phyton.2023.029205

Abstract Ilex asprella (Hook. et Arn.) Champ. ex Benth is one of the most important traditional Chinese medicines in southern China. The seeds of Ilex asprella usually have extremely low germination due to their dormancy characteristics, which severely impacts the efficiency of seedling raising and increases labor costs. In this study, to improve the seed germination of I. asprella, the effects of germination substrate, hormone, winnowing, and stratification treatments on the seed germination of I. asprella were investigated. The results of the germination matrix showed that the highest germination percentage of 45.2% was achieved under the 20°C/10°C day/night temperature and vermiculite… More >

B. Porro, A. Michel, F. Cousson-Gélie

Psycho-Oncologie, Vol.16, No.2, pp. 273-281, 2022, DOI:10.3166/pson-2022-0181

Abstract L’objectif est d’étudier les liens entre précarité sociale, soutien social perçu et retour au travail (RAT) dans la première année suivant le début des traitements adjuvants du cancer du sein. Soixante-huit patientes incluses au début des traitements adjuvants (T0) ont été suivies à 3 (T1) et 12 mois (T2). Le soutien informatif des amis à T0 favorise le RAT à T1. La précarité et le soutien négatif à T0 et T2 sont des freins au RAT à T2. La prise en charge du RAT doit être proposée et adaptée dès le début des traitements. More >

A. Stulz, N. Favez, C. Flahault

Psycho-Oncologie, Vol.16, No.3, pp. 303-312, 2022, DOI:10.3166/pson-2022-0206

Abstract Contexte: Le cancer du côlon est le troisième cancer le plus diagnostiqué au monde et a un impact sur tous les aspects de la vie des patients et de leur partenaire. Jusqu’à présent, peu d’études ont étudié l’ajustement sexuel des patients et aucune n’a analysé les interactions entre les partenaires.
Objectif: Décrire les facteurs individuels et dyadiques liés à l’ajustement sexuel des couples.
Méthode: Treize couples ont répondu à un ensemble de questionnaires portant sur le soutien social, la communication et les stratégies de coping dyadique et la satisfaction sexuelle. Des analyses non paramétriques ont été réalisées sur les données… More >