Chandla Ellis^1,*, C. Chellamuthu¹, J. Jayaseelan²

Intelligent Automation & Soft Computing, Vol.33, No.2, pp. 1121-1138, 2022, DOI:10.32604/iasc.2022.023079

Abstract Nature's remarkable and merciful gift to the planet Earth is sunlight which may be highly lucrative if harvested and harnessed properly. Photovoltaic (PV) panels are used to convert the solar energy to electrical energy which are currently used to feed AC loads/grid. In this paper, modelling, performance and power flow studies of grid connected single phase inverter fed from PV array under steady state as well as transient conditions are considered. This paper focuses on the study and development of analytical model of micro-grid integrated single phase five level cascaded H-bridge inverter (MGISPFLCHBPVI) powered by a PV panel. A simple… More >

Y. Alexander Jeevanantham^1,*, S. Srinath²

Intelligent Automation & Soft Computing, Vol.33, No.2, pp. 909-921, 2022, DOI:10.32604/iasc.2022.022907

Abstract A unified power quality conditioner (UPQC) plays a crucial role in the Power quality improvement of a power system. In this paper, a reduced switch multilevel inverter is with artificial neural network, soft computing technique control is proposed for UPQC. This proposed topology is employed for the mitigation of various power quality issues such as voltage sag, voltage swell, power factor, harmonics, and restoration time of voltage compensation. To show the enriched performance of the proposed topology comparative analysis is made with other two topologies of UPQC such as Conventional UPQC and UPQC using cascaded H bridge (CHB) five-level Inverter.… More >

M. P. Viswanathan^*, B. Anand

Computer Systems Science and Engineering, Vol.42, No.1, pp. 165-181, 2022, DOI:10.32604/csse.2022.020400

Abstract In this research work, single-stage fifteen levels cascaded DC-interface converter (CDDCLC) is proposed for sun arranged photovoltaic technology (PV) applications. The proposed geography is joined with help DC chopper and H-associate inverter to upgrade the power converter to accomplish the diminished harmonic profile. In assessment with the customary inverter structures, the proposed system is used with diminished voltage stress, decreased switch count and DC source tally. The proposed research work with cascaded DC link converter design requires three DC sources for combining fifteen-level AC output. This investigation structure switching technique is phase opposition and disposition pulse width modulation technique (POPD)… More >

Qihui Ling^1,2,*, Wei Zhang², Qiancheng Zhao^1,2, Juchuan Dai^1,2

Energy Engineering, Vol.119, No.1, pp. 287-300, 2022, DOI:10.32604/EE.2022.014718

Abstract The inverter is one of the key components of wind turbine, and it is a complex circuit composed of a series of components such as a variety of electronic components and power devices. Therefore, it is difficult to accurately identify the operation states of inverter and some problems regarding its own circuit, especially in the early stages of failure. However, if the inverter temperature prediction model can be established, the early states can be identified through the judgment of the output temperature. Accordingly, considering whether the inverter heats up normally from the perspective of heat dissipation, a method for the… More >

M. Manjusha^1,*, T. S. Sivarani², Carol J. Jerusalin¹

Intelligent Automation & Soft Computing, Vol.32, No.1, pp. 621-641, 2022, DOI:10.32604/iasc.2022.020560

Abstract By utilizing Fuzzy based FOPID-controller, this work is designed via the energy reshaping concept for Grid connected Photovoltaic (PV) systems for electric vehicles and this PV module has its own inverter which is synchorised with the utility grid. In grid connected PV system, the mitigation plays an important role where the capacity of PV arrays increases it maintains power quality and it is necessary to comply with some requirements such as harmonic mitigation. Unless a maximum power point tracking (MPPT) algorithm is used, PV systems do not continuously produce their theoretical optimal power. Under various atmospheric conditions, MPPT is obtained… More >

S. Caroline^1,*, M. Marsaline Beno²

Intelligent Automation & Soft Computing, Vol.31, No.3, pp. 1753-1769, 2022, DOI:10.32604/iasc.2022.020440

Abstract Multilevel inverters are a new class of dc-ac converters designed for high-power medium voltage and power applications as they work at high switching frequencies and in renewable applications by avoiding stresses like dv/dt and has low harmonic distortion in their output voltage. In variable speed drives and power generation systems, the use of multilevel inverters is obligatory. To estimate the switching positions in inverter configuration with low harmonic distortion value, a fast sequential optimization algorithm has been established. For harmonic reduction in multilevel inverter design, a hybrid optimization technique combining Firefly and the Genetic algorithm was used. In several real-time… More >

Buddhadeva Sahoo^1,*, Sangram Keshari Routray², Pravat Kumar Rout², Mohammed M. Alhaider³

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 2319-2346, 2022, DOI:10.32604/cmc.2022.019559

Abstract This paper presents a combined control and modulation technique to enhance the power quality (PQ) and power reliability (PR) of a hybrid energy system (HES) through a single-phase 11-level cascaded H-bridge inverter (11-CHBI). The controller and inverter specifically regulate the HES and meet the load demand. To track optimum power, a Modified Perturb and Observe (MP&O) technique is used for HES. Ultra-capacitor (UCAP) based energy storage device and a novel current control strategy are proposed to provide additional active power support during both voltage sag and swell conditions. For an improved PQ and PR, a two-way current control strategy such… More >

Xiaojuan Lu, Qingbo Zhang^*

Energy Engineering, Vol.118, No.6, pp. 1729-1740, 2021, DOI:10.32604/EE.2021.014938

Abstract In the process of grid-connected photovoltaic power generation, there are high requirements for the quality of the power that the inverter breaks into the grid. In this work, to improve the power quality of the grid-connected inverter into the grid, and the output of the system can meet the grid-connected requirements more quickly and accurately, we exhibit an approach toward establishing a mixed logical dynamical (MLD) model where logic variables were introduced to switch dynamics of the single-phase photovoltaic inverters. Besides, based on the model, our recent efforts in studying the finite control set model predictive control (FCS-MPC) and devising… More >

Ibrahim Atawi¹, Sherif Zaid^1,2,3,*

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 449-469, 2022, DOI:10.32604/iasc.2022.019959

Abstract Transformerless inverters have become an important integration of the modern photovoltaic (PV) grid-tied systems. Unfortunately, it has a general safety problem regarding the earth leakage current that must be less than the recommended standards. Lately, the H7 transformerless inverter, which is a three-phase inverter with an additional switch on the DC side, is introduced to mitigate the earth leakage current. Different modulation techniques and controllers are proposed to optimize its performance. This paper proposed the application of model predictive control (MPC) to grid-connected H7 transformerless inverter supplied by the PV power system. In modeling the system, the grid inductance has… More >

Mokhtar Aly^1,2, Hegazy Rezk^3,4,*

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2283-2299, 2021, DOI:10.32604/cmc.2021.014786

Abstract Fuzzy logic control (FLC) systems have found wide utilization in several industrial applications. This paper proposes a fuzzy logic-based fault detection and identification method for open-circuit switch fault in grid-tied photovoltaic (PV) inverters. Large installations and ambitious plans have been recently achieved for PV systems as clean and renewable power generation sources due to their improved environmental impacts and availability everywhere. Power converters represent the main parts for the grid integration of PV systems. However, PV power converters contain several power switches that construct their circuits. The power switches in PV systems are highly subjected to high stresses due to… More >