Xuying Guo^1,2,*, Saiou Fu¹, Junzhen Di³, Yanrong Dong³, Guoliang Jiang³

Journal of Renewable Materials, Vol.9, No.3, pp. 541-555, 2021, DOI:10.32604/jrm.2021.012335

Abstract The high concentrations of Fe²⁺ and Mn²⁺ in acid mine drainage make it difficult and expensive to treat. It is urgent that we find a cheap and efficient adsorption material to treat Fe²⁺ and Mn²⁺. As a solid waste in mining areas, coal gangue occupies a large area and pollutes the surrounding environment during the stacking process. Developing a method of resource utilization is thus a research hotspot. In this study, we modified spontaneous combustion gangue using NaOH, NaCl, and HCl by chemically modifying the minerals. We determined the optimal conditions for treating Fe²⁺ and Mn²⁺ in acid mine drainage… More >

Shaheena Khanum¹, Muhammad Adeel Ashraf², Asim Karim¹, Bilal Shoaib³, Muhammad Adnan Khan⁴, Rizwan Ali Naqvi⁵, Kamran Siddique⁶, Mohammed Alswaitti^6,*

CMC-Computers, Materials & Continua, Vol.66, No.2, pp. 2165-2181, 2021, DOI:10.32604/cmc.2020.013646

Abstract Glycation is a non-enzymatic post-translational modification which assigns sugar molecule and residues to a peptide. It is a clinically important attribute to numerous age-related, metabolic, and chronic diseases such as diabetes, Alzheimer’s, renal failure, etc. Identification of a non-enzymatic reaction are quite challenging in research. Manual identification in labs is a very costly and time-consuming process. In this research, we developed an accurate, valid, and a robust model named as Gly-LysPred to differentiate the glycated sites from non-glycated sites. Comprehensive techniques using position relative features are used for feature extraction. An algorithm named as a random forest with some preprocessing… More >

Nishit Savla¹, Raksha Anand², Soumya Pandit^2,*, Ram Prasad^3,*

Journal of Renewable Materials, Vol.8, No.12, pp. 1581-1605, 2020, DOI:10.32604/jrm.2020.011803

Abstract Microbial fuel cells (MFCs) are an attractive innovation at the nexus of energy and water security for the future. MFC utilizes electrochemically active microorganisms to oxidize biodegradable substrates and generate bioelectricity in a single step. The material of the anode plays a vital role in increasing the MFC’s power output. The anode in MFC can be upgraded using nanomaterials providing benefits of exceptional physicochemical properties. The nanomaterials in anode gives a high surface area, improved electron transfer promotes electroactive biofilm. Enhanced power output in terms of Direct current (DC) can be obtained as the consequence of improved microbe-electrode interaction. However,… More >

Ningning Wang¹, Caili Zhang^1,2,*, Wenqin Zhu³, Yunxuan Weng^1,2,*

Journal of Renewable Materials, Vol.8, No.9, pp. 1139-1149, 2020, DOI:10.32604/jrm.2020.09961

Abstract To clarify the effects of lignin as a biodegradable filler added into the PLA matrix, PLA/lignin composites with or without silane coupling agent of γ- (2,3-epoxypropoxy)propy trimethoxysilane (KH560) were prepared by a one-step solvent-free modification method. The effects of KH560 as a compatibilizer on the morphology, chemical structure, crystallization behavior, thermal degradative behavior as well as mechanical strength of the PLA/lignin composites were analyzed in detail. It was found that, after modification by KH560, the fractured surfaces of composites became smooth, suggested sufficient bonding between the lignin and PLA in the composites with KH560 coupling agent molecules. This result further… More >

Weili Wu^*, Fengyu Chen

Journal of Renewable Materials, Vol.8, No.8, pp. 905-913, 2020, DOI:10.32604/jrm.2020.010558

Abstract Corn stalk cellulose (CS)/used rubber powder (RP) composites were prepared by mixing, the silane coupling agent 3-Mercaptopropyl trimethoxysilane (KH590), r-Aminopropyltrieth oxysilane (KH550), isopropyl dioleic (dioctylphosphate) titanate (HY101) and bis-(γ-triethoxysilylpropyl)- tetrasulfide (Si69) were used to modify the interface of composites. The effects of the CS and coupling agents on the mechanical properties, thermal properties, interfacial morphology and structure of the composites were investigated, respectively. The results showed that the addition of CS could effectively improve the mechanical properties of the composites. Compared with the untreated composites, the interfacial bonding between CS and RP was significantly improved by the coupling modifi- cation… More >

Plínio B. Mundim¹, Rondinele A. R. Ferreira¹, Leila A. C. Motta¹, Mariana A. Henrique², Daniel Pasquini^2,*

Journal of Renewable Materials, Vol.8, No.8, pp. 891-903, 2020, DOI:10.32604/jrm.2020.010655

Abstract The objective of this work was to evaluate different superficial treatments of sisal fibres employing lignin, and their use as a reinforcement agent in cementitious composites. The treatments consisted of superficially impregnating sisal fibres (S) with organosolv lignin (LO), organosolv lignin and glutaraldehyde (LOG), Kraft lignin (LK) and Kraft lignin and glutaraldehyde (LKG). The fibre modifications were verified by FTIR-ATR and SEM analyzes, and the presence of lignin on the surface of the fibres was evidenced, confirming the effectiveness of the treatments. The mechanical, thermal (by TGA) and water absorption properties of the fibres before and after the modifications were… More >

MINGHAO LI¹, YOULI QIU², WENHUI ZHANG¹, RUIHAO SUN¹, MEIJIN DU¹, LUZE YANG³, YU LI^1,*

BIOCELL, Vol.44, No.2, pp. 247-255, 2020, DOI:10.32604/biocell.2020.08835

Abstract While phthalate acid esters (PAEs) cannot fluoresce alone, they can be detected by fluorescence spectroscopy after chelation with bovine serum albumin (BSA). In this study, the types of amino acid residues at the active site of PAEs chelated with BSA were determined using molecular docking technology. A modification scheme of BSA with higher detection sensitivity fluorescence spectroscopy for PAEs was proposed based on the docking results and constructed for a novel BSA structure with a higher detection sensitivity of fluorescence spectroscopy using a homologous modeling method. Density functional theory (DFT) was employed to explore the influence before and after BSA… More >

YAQUN HONG^1,2, BO WAN³, XIAOFAN LI^1,4,*

BIOCELL, Vol.44, No.2, pp. 237-246, 2020, DOI:10.32604/biocell.2020.08887

Abstract Most studies focus on the adaptive immune cells in the GVHD pathogenesis, while little is known about innate immune cells in GVHD occurrence and development, especially macrophages. Meanwhile, a higher incidence of graft versus host disease (GVHD) is also found in the elderly patients. Though advances have been made in the modification of macrophages influenced by the inflamm-ageing, there is still no review on the role of macrophages in GVHD and the association between GVHD and the altered macrophages by inflamm-ageing. In this review, we focus on the potential age-related modifications of macrophage in GVHD, which contributes to the change… More >

Andrew D. Spearman

Congenital Heart Disease, Vol.12, No.6, pp. 828-833, 2017, DOI:10.1111/chd.12543

Abstract A genetic basis of congenital heart disease (CHD) has been known for decades. In addition to the sequence of the genome, the contribution of epigenetics to pediatric cardiology is increasingly recognized. Multiple epigenetic mechanisms, including DNA methylation, histone modification, and RNA-based regulation, are known mediators of cardiovascular disease, including both development and progression of CHD and its sequelae. Basic understanding of the concepts of epigenetics will be essential to all pediatric cardiologists in order to understand mechanisms of pathophysiology, pharmacotherapeutic concepts, and to understand the role of epigenetics in precision medicine. More >

Kurthan Kersch^1,*, Elmar Woschke²

Sound & Vibration, Vol.54, No.2, pp. 75-84, 2020, DOI:10.32604/sv.2020.08909

Abstract This work aims to improve the setup of an electrodynamic triaxial shaker prototype with respect to its usability for the automotive industry. Triaxial shakers being capable of meeting the corresponding requirements are not available as standard test equipment. Modifications on the fixture have to be conducted in order to ensure an effective control. The first part of the work is the qualitative description of the system behavior. Therefore, the shaker is treated as a black box. The second part is the modification of the test fixture in order to handle the resonances of the shaker, which is elementary for its… More >