Safia Akram^*, Alia Razia

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.3, pp. 901-922, 2021, DOI:10.32604/cmes.2021.014469

Abstract This article brings into focus the hybrid effects of thermal and concentration convection on peristaltic pumping of fourth grade nanofluids in an inclined tapered channel. First, the brief mathematical modelling of the fourth grade nanofluids is provided along with thermal and concentration convection. The Lubrication method is used to simplify the partial differential equations which are tremendously nonlinear. Further, analytical technique is applied to solve the differential equations that are strongly nonlinear in nature, and exact solutions of temperature, volume fraction of nanoparticles, and concentration are studied. Numerical and graphical findings manifest the influence of various physical flow-quantity parameters. It… More >

Mostafa Zaydan¹, Mehdi Riahi^1,2,*, Fateh Mebarek-Oudina³, Rachid Sehaqui¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 789-819, 2021, DOI:10.32604/fdmp.2021.015422

Abstract Steady, laminar mixed convection inside a lid-driven square cavity filled with nanofluid is investigated numerically. We consider the case where the right and left walls are moving downwards and upwards respectively and maintained at different temperatures while the other two horizontal ones are kept adiabatic and impermeable. The set of nonlinear coupled governing mass, momentum, and energy equations are solved using an extensively validated and a highly accurate finite difference method of fourth-order. Comparisons with previously conducted investigations on special configurations are performed and show an excellent agreement. Meanwhile, attention is focused on the heat transfer enhancement when different nano-particles:… More >

Iskandar Waini^1,2, Anuar Ishak^2,*, Ioan Pop³

CMC-Computers, Materials & Continua, Vol.68, No.3, pp. 3255-3269, 2021, DOI:10.32604/cmc.2021.017643

Abstract This study examines the stagnation point flow over a stretching/shrinking sheet in a hybrid nanofluid with homogeneous-heterogeneous reactions. The hybrid nanofluid consists of copper (Cu) and alumina (Al₂O₃) nanoparticles which are added into water to form Cu-Al₂O₃/water hybrid nanofluid. The similarity equations are obtained using a similarity transformation. Then, the function bvp4c in MATLAB is utilised to obtain the numerical results. The dual solutions are found for limited values of the stretching/shrinking parameter. Also, the turning point arises in the shrinking region (λ < 0). Besides, the presence of hybrid nanoparticles enhances the heat transfer rate, skin friction coefficient, and… More >

D. R. V. S. R. K. Sastry¹, Peri K. Kameswaran², Mohammad Hatami^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 285-300, 2021, DOI:10.32604/fdmp.2021.014429

Abstract The problem of Marangoni mixed convection in the presence of an inclined magnetic field with uniform strength in a nanofluid (formed by the dispersion of two metallic nanoparticles, i.e., Copper (Cu), and alumina (Al₂O₃) in water) is addressed numerically. The effects of viscous dissipation and Ohmic heating are also considered. The original set of governing partial differential equations is reduced to a set of non-linear coupled ordinary differential equations employing the similarity transformation technique. The simplified equations are numerically solved through MATLAB ‘bvp4c’ algorithm. The results are presented in terms of graphs for several parameters. It is found that enhancing… More >

R. Kalaivanan¹, N. Vishnu Ganesh², Qasem M. Al-Mdallal^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 319-332, 2021, DOI:10.32604/fdmp.2021.012789

Abstract The buoyancy driven flow of a second-grade nanofluid in the presence of a binary chemical reaction is analyzed in the context of a model based on the balance equations for mass, species concentration, momentum and energy. The elastic properties of the considered fluid are taken into account. The two-dimensional slip flow of such non-Newtonian fluid over a porous flat material which is stretched vertically upwards is considered. The role played by the activation energy is accounted for through an exponent form modified Arrhenius function added to the Buongiorno model for the nanofluid concentration. The effects of thermal radiation are also… More >

Adnan¹, Umar Khan², Naveed Ahmed³, Syed Tauseef Mohyud-Din⁴, Dumitru Baleanu^5,6,7, Kottakkaran Sooppy Nisar⁸, Ilyas Khan^9,*

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 213-228, 2021, DOI:10.32604/cmc.2021.014383

Abstract Entropy Generation Optimization (EGO) attained huge interest of scientists and researchers due to its numerous applications comprised in mechanical engineering, air conditioners, heat engines, thermal machines, heat exchange, refrigerators, heat pumps and substance mixing etc. Therefore, the study of radiative hybrid nanofluid (GO-MoS₂/C₂H₆O₂–H₂O) and the conventional nanofluid (MoS₂/C₂H₆O₂–H₂O) is conducted in the presence of Lorentz forces. The flow configuration is modeled between the parallel rotating plates in which the lower plate is permeable. The models which govern the flow in rotating system are solved numerically over the domain of interest and furnished the results for the temperature, entropy generation and… More >

Rachid Maouedj¹, Younes Menni², Mustafa Inc^3,4,*, Yu-Ming Chu^5,6,*, Houari Ameur⁷, Giulio Lorenzini⁸

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.3, pp. 855-889, 2021, DOI:10.32604/cmes.2021.014524

Abstract Re-engineering the channel heat exchangers (CHEs) is the goal of many recent studies, due to their great importance in the scope of energy transport in various industrial and environmental fields. Changing the internal geometry of the CHEs by using extended surfaces, i.e., VGs (vortex generators), is the most common technique to enhance the efficiency of heat exchangers. This work aims to develop a new design of solar collectors to improve the overall energy efficiency. The study presents a new channel design by introducing VGs. The FVM (finite volume method) was adopted as a numerical technique to solve the problem, with… More >

Khadija A. Al-Hassani¹, M. S. Alam², M. M. Rahman^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 1-20, 2021, DOI:10.32604/fdmp.2021.013497

Abstract Nanofluids have enjoyed a widespread use in many technological applications due to their peculiar properties. Numerical simulations are presented about the unsteady behavior of mixed convection of Fe₃O₄-water, Fe₃O₄- kerosene, Fe₃O₄-ethylene glycol, and Fe₃O₄-engine oil nanofluids inside a lid-driven triangular cavity. In particular, a two-component non-homogeneous nanofluid model is used. The bottom wall of the enclosure is insulated, whereas the inclined wall is kept a constant (cold) temperature and various temperature laws are assumed for the vertical wall, namely: θ = 1(Case 1), θ = Y(1 – Y)(Case 2), and θ = sin(2πY)(Case 3). A tilted magnetic field of uniform… More >

Muhammad Saqib¹, Ilyas Khan^2,*, Sharidan Shafie¹, Ahmad Qushairi Mohamad¹, El-Sayed M. Sherif^3,4

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1069-1084, 2021, DOI:10.32604/cmc.2021.012000

Abstract In recent times, scientists and engineers have been most attracted to electrically conducted nanofluids due to their numerous applications in various fields of science and engineering. For example, they are used in cancer treatment (hyperthermia), magnetic resonance imaging (MRI), drug-delivery, and magnetic refrigeration (MR). Bearing in mind the significance and importance of electrically conducted nanofluids, this article aims to study an electrically conducted water-based nanofluid containing carbon nanotubes (CNTs). CNTs are of two types, single-wall carbon nanotubes (SWCNTs) and multiple-wall carbon nanotubes (MWCNTs). The CNTs (SWCNTs and MWCNTs) have been dispersed in regular water as base fluid to form water-CNTs… More >

Sameh E. Ahmed^1,2,*, Dalal Alrowaili³, Ehab Mahmoud Mohamed^4,5, Abdelraheem M. Aly^1,2

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 3195-3213, 2021, DOI:10.32604/cmc.2021.012471

Abstract In this paper, the Galerkin finite element method (FEM) together with the characteristic-based split (CBS) scheme are applied to study the case of the non-linear Boussinesq approximation within sinusoidal heating inclined enclosures filled with a non-Darcy porous media and nanofluids. The enclosure has an inclination angle and its side-walls have varying sinusoidal temperature distributions. The working fluid is a nanofluid that is consisting of water as a based nanofluid and Al₂O₃ as nanoparticles. The porous medium is modeled using the Brinkman Forchheimer extended Darcy model. The obtained results are analyzed over wide ranges of the non-linear Boussinesq parameter 0 ≤… More >