Omar A. Saraereh^*, Ashraf Ali

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 5383-5397, 2022, DOI:10.32604/cmc.2022.021724

Abstract With the rapid growth in the number of mobile devices and user connectivity, the demand for higher system capacity and improved quality-of-service is required. As the demand for high-speed wireless communication grows, numerous modulation techniques in the frequency, temporal, and spatial domains, such as orthogonal frequency division multiplexing (OFDM), time division multiple access (TDMA), space division multiple access (SDMA), and multiple-input multiple-output (MIMO), are being developed. Along with those approaches, electromagnetic waves’ orbital angular momentum (OAM) is attracting attention because it has the potential to boost the wireless communication capacity. Antenna electromagnetic radiation can be described by a sum of… More >

Namit Gupta^1,*, Kunwar Singh Vaisla², Arpit Jain³, Adesh Kumar⁴, Rajeev Kumar³

Computer Systems Science and Engineering, Vol.40, No.3, pp. 1073-1084, 2022, DOI:10.32604/csse.2022.019911

Abstract Wireless sensor network (WSN) is a group of interconnected sensor nodes that work wirelessly to capture the information of surroundings. The routing of the network is a challenging task. The routing of WSN is classified as proactive, reactive, and hybrid. Adhoc on-demand distance vector (AODV) routing is an example of reactive routing based on the demand route formations among different nodes in the network. The research article emphasizes the design and simulation of the AODV routing hardware chip using very-high-speed integrated circuit hardware description language (VHDL) programming in Xilinx integrated synthesis environment (ISE) 14.7 software. The performance of the chip… More >

Xin Xu^*, Lian Zhang^*

Energy Engineering, Vol.118, No.6, pp. 1905-1920, 2021, DOI:10.32604/EE.2021.016738

Abstract This paper briefly summarizes the current status of typical solar thermal power plant system, including system composition, thermal energy storage medium and performance. The thermo-physical properties of the storage medium are some of the most important factors that affect overall efficiency of the system, because some renewable energy sources such as solar and wind are unpredictable. A thermal storage system is therefore necessary to store energy for continuous usage. Based on the form of storage or the mode of system connection, heat exchangers of a thermal storage system can produce different temperature ranges of heat transfer fluid to realize energy… More >

M. Vanitha^1,*, J. Kirubakaran², K. Radhika²

Computer Systems Science and Engineering, Vol.40, No.2, pp. 571-579, 2022, DOI:10.32604/csse.2022.017663

Abstract The IEEE 802.11ad innovation has enabled the impact of remote devices in unauthorized 60 GHz unlicensed frequency band at Giga bits per second information transfer rate in speed concentrated 5G applications. We have presented an innovative work that deals with the upgradation of the ability of IEEE 802.11ad wireless LAN to make it suitable for wireless applications. An exact examination on the IEEE 802.11ad analysis has been carried out in this work to achieve the greatest throughput. This has pulled attraction in broad consideration for accomplishing the pinnacle transmission rate of 8 Gbit/s. IEEE 802.11ad is a convention utilized for… More >

Samer Alabed^*, Issam Maaz, Mohammad Al-Rabayah

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 999-1015, 2022, DOI:10.32604/cmc.2022.019758

Abstract Single-relay selection techniques based on the max-min criterion can achieve the highest bit error rate (BER) performance with full diversity gain as compared to the state-of-the-art single-relay selection techniques. Therefore, in this work, we propose a modified max-min criterion by considering the differences among the close value channels of all relays while selecting the best relay node. The proposed criterion not only enjoys full diversity gain but also offers a significant improvement in the achievable coding gain as compared to the conventional one. Basically, in this article, an improved bi-directional three-phase single-relay selection technique using the decode-and-forward protocol for wireless… More >

Khairol Amali bin Ahmad¹, Mohammad Nazmul Hasan², Md. Sharif Hossen^2,*, Khaleel Ahmad³

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 3075-3087, 2021, DOI:10.32604/cmc.2021.014436

Abstract Pocket Switched Networks (PSN) represent a particular remittent network for direct communication between the handheld mobile devices. Compared to traditional networks, there is no stable topology structure for PSN where the nodes observe the mobility model of human society. It is a kind of Delay Tolerant Networks (DTNs) that gives a description to circulate information among the network nodes by the way of taking the benefit of transferring nodes from one area to another. Considering its inception, there are several schemes for message routing in the infrastructure-less environment in which human mobility is only the best manner to exchange information.… More >

Yinghua Zhang^1,2, Jian Liu¹, Yunfeng Peng¹, Yanfang Dong², Changming Zhao^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.125, No.1, pp. 239-257, 2020, DOI:10.32604/cmes.2020.010778

Abstract Aiming for ultra-reliable low-latency wireless communications required in industrial internet of things (IIoT) applications, this paper studies a simple cognitive radio non-orthogonal multiple access (CR-NOMA) downlink system. This system consists of two secondary users (SUs) dynamically interfered by the primary user (PU), and its performance is characterized by the outage probability of the SU communications. This outage probability is calculated under two conditions where, a) the transmission of PU starts after the channel state information (CSI) is acquired, so the base station (BS) is oblivious of the interference, and b) when the BS is aware of the PU interference, and… More >

Louis Francois Marie^1,*, Sunkara Prudhvi Raj², Policherla Venkata Sai³, Tara MacLeod¹, Morapakala Srinivas², K. Srinivas Reddy³, Tadhg Seán O’Donovan⁴

Energy Engineering, Vol.117, No.5, pp. 323-342, 2020, DOI:10.32604/EE.2020.011035

Abstract Non-centrifugal cane sugar (NCS), known as Jaggery, is a form of unre- fined sugar which contains molasses. The integration of renewable energy resources in the production of NCS, have been analysed. The work investigates the energy requirements of a system incorporating a freeze-concentrator and a solar thermal heater to reduce the reliance on the combustion of bagasse or other fuels in a Jaggery production process. Depending on the extent to which freeze concentration can be incorporated into the process, results show that the minimum theoretical energy required to produce Jaggery can be reduced by 91.30% overall. Although difficult in practice,… More >

Julius Beneoluchi Odili^a, Mohd Nizam Mohmad Kahar^a, A. Noraziah^a,b, M. Zarina^c, Riaz Ul Haq^a

Intelligent Automation & Soft Computing, Vol.24, No.4, pp. 759-769, 2018, DOI:10.1080/10798587.2017.1334370

Abstract This paper carries out a performance analysis of major Nature-inspired Algorithms in solving the benchmark symmetric and asymmetric Traveling Salesman’s Problems (TSP). Knowledge of the workings of the TSP is very useful in strategic management as it provides useful guidance to planners. After critical assessments of the performances of eleven algorithms consisting of two heuristics (Randomized Insertion Algorithm and the Honey Bee Mating Optimization for the Travelling Salesman’s Problem), two trajectory algorithms (Simulated Annealing and Evolutionary Simulated Annealing) and seven population-based optimization algorithms (Genetic Algorithm, Artificial Bee Colony, African Buffalo Optimization, Bat Algorithm, Particle Swarm Optimization, Ant Colony Optimization and… More >

Lei Li^1,2,3,*, Leren Tao^2,3, Yanan Gou¹, Shan Zhang¹

Energy Engineering, Vol.117, No.4, pp. 225-235, 2020, DOI:10.32604/EE.2020.010892

Abstract The scroll expander used in organic Rankine cycle (ORC) system is improved, and its performance is analyzed experimentally. The modified profile and inlet hole of the scroll expander are enhanced, and the performance of the scroll expander before and after the improvement is analyzed. The results show that when the inlet pressure exceeds 0.7 MPa, the waist-shaped hole with a larger area is preferable. The scroll expander with a waist-shaped hole has a larger output power and wider optimal pressure range, and when the inlet pressure is 1.6 MPa, the maximum output power increases by 230 W. The output power… More >