Facundo I. Altuna¹, Borja Fernández-d’Arlas², M. Angeles Corcuera², Arantxa Eceiza², Mirta I. Aranguren³, Pablo M. Stefani^3*

Journal of Renewable Materials, Vol.4, No.4, pp. 275-284, 2016, DOI:10.7569/JRM.2016.634120

Abstract Mixtures of biomass-derived polyols were used to synthesize rigid polyurethane (PU) foams. A commercial polymerized methylene diphenyl diisocyanate (pMDI) was used as crosslinker, and distilled water served as foaming agent. The morphology and mechanical properties of foams with different glycerol and water contents were compared in order to evaluate the most suitable formulations. The rigid foams with higher water contents had larger and more anisotropic cells, explaining their lower density. Compressive moduli ranged from about 2.5 MPa to above 20 MPa and collapse stresses from 55 kPa to more than 1 MPa for densities between 54 and 143 kg/m3. Densification… More >

Piotr Rojek², Mirta I. Aranguren¹, Aleksander Prociak², Mirna A. Mosiewicki^1*

Journal of Renewable Materials, Vol.4, No.4, pp. 266-274, 2016, DOI:10.7569/JRM.2016.634113

Abstract Solid biobased polyurethanes (PUs) were prepared from a rapeseed oil-based polyol (ROPO) synthesized by epoxidation reaction followed by oxirane ring-opening with diethylene glycol. The reference material was modified by replacement of the ROPO with glycerol in different proportions and also by addition of commercial microcellulose (MC). The curing process of the reactive mixtures was monitored by rheological measurements and the analysis showed that both MC and glycerol increase the time of crossover between storage and loss modulus (liquid to solid transition in the response at 1 Hz). The completely cured polyurethanes were characterized by physical, morphological and mechanical analysis. The… More >

Karina Cruz-Aldaco¹, Erika Flores-Loyola², Cristóbal Noé Aguilar-González¹, Nuria Burgos³, Alfonso Jiménez^3*

Journal of Renewable Materials, Vol.4, No.3, pp. 178-184, 2016, DOI:10.7569/JRM.2016.634107

Abstract The use of vegetable oils to replace fossil feedstock has become an area of opportunity and a priority for study in the field of polymer science. Vegetable oils are considered as renewable resources with high potential, low cost and full availability. The aim of this study is the synthesis of biobased polyols from cottonseed oil (Gossypium barbadanse) and corn oil (Zea mays) as feedstock. Their synthesis was successfully performed, as can be concluded from the determination of their hydroxyl index as well as the structural and thermal characterization carried out in this work. Polyurethanes from biobased polyols were synthesized with… More >

M. Kirpluks^1*, U. Cabulis¹, A. Ivdre¹, M. Kuranska², M. Zieleniewska³, M. Auguscik³

Journal of Renewable Materials, Vol.4, No.1, pp. 86-100, 2016, DOI:10.7569/JRM.2015.634132

Abstract The most common sustainable solution for polyurethane (PU) materials is their production using renewable resources. Polyols derived from biomass and recycled polymers are the most promising way to do that. This study compares five different sustainable polyols as a possible raw material for production of highdensity rigid PU foams for automotive application. The goal of our study was to show that biobased polyols are a suitable replacement for polyols derived from petrochemical products. The influence of the chemical structure of polyols on the PU polymer matrix and foam properties was investigated. Two sources of PU raw material feedstock were studied:… More >

Aleksander Prociak^*, Elźbieta Malewska, Szymon Bąk

Journal of Renewable Materials, Vol.4, No.1, pp. 78-85, 2016, DOI:10.7569/JRM.2015.634129

Abstract In this article, the results of the foaming process analysis of fl exible polyurethane with different isocyanate indexes are presented. Two types of flexible polyurethane foams (FPURF) were obtained: (1) by using petrochemical components and a rapeseed-oil-based polyol (used in the amount of 20 wt%), (2) by using petrochemical components and cellulose as a natural fi ller in the amount of 3 php (per hundred parts of polyol). The characteristic parameters of the foaming process, such as the foam’s growth velocity, the core temperature and dielectric polarization, were measured using a Foamat device. Moreover, the following properties of flexible polyurethane… More >

Isabel Patrícia Fernandes¹, Mariana Barbosa¹, Joana Soares Amaral², Vera Pinto³, José Luís Rodrigues³, Maria José Ferreira³, Maria Filomena Barreiro^1*

Journal of Renewable Materials, Vol.4, No.1, pp. 47-56, 2016, DOI:10.7569/JRM.2015.634126

Abstract Among the wide variety of materials employed in the manufacture of shoes, thermoplastic polyurethanes (TPUs) are one of the most widely used. Given its widespread use, and associated waste management problems, the development of more biodegradable and evironmentally compatible solutions is needed. In this work, a polyester-based TPU used in the footwear industry for outsoles production was modifi ed by compounding with lignin, starch and cellulose at content of 4% (w/w). The biodegradability was evaluated by using agar plate tests with the fungi Aspergillus niger ATCC16404, the Gram-negative bacteria Pseudomonas aeruginosa ATCC9027 and an association of both (consortium), and soil… More >