Kamaljit Kaur^{1, *}, Kuljit Kaur²

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 913-946, 2019, DOI:10.32604/cmc.2019.07675

Abstract Hard Disk drives (HDDs) are an essential component of cloud computing and big data, responsible for storing humongous volumes of collected data. However, HDD failures pose a huge challenge to big data servers and cloud service providers. Every year, about 10% disk drives used in servers crash at least twice, lead to data loss, recovery cost and lower reliability. Recently, the researchers have used SMART parameters to develop various prediction techniques, however, these methods need to be improved for reliability and real-world usage due to the following factors: they lack the ability to consider the gradual change/deterioration of HDDs; they… More >

Sifan Long¹, Ming Zhao^2,*, Xinfu He³

CMC-Computers, Materials & Continua, Vol.58, No.3, pp. 727-760, 2019, DOI:10.32604/cmc.2019.04454

Abstract With the development of society and the exhaustion of fossil energy, researcher need to identify new alternative energy sources. Nuclear energy is a very good choice, but the key to the successful application of nuclear technology is determined primarily by the behavior of nuclear materials in reactors. Therefore, we studied the radiation performance of the fusion material reduced activation ferritic/martensitic (RAFM) steel. The main novelty of this paper are the statistical analysis of RAFM steel data sets through related statistical analysis and the formula derivation of the gradient descent method (GDM) which combines the gradient descent search strategy of the… More >

Di Xiao^1,*, Jia Liang¹, Qingqing Ma¹, Yanping Xiang¹, Yushu Zhang²

CMC-Computers, Materials & Continua, Vol.58, No.1, pp. 1-13, 2019, DOI:10.32604/cmc.2019.02171

Abstract To fulfill the requirements of data security in environments with nonequivalent resources, a high capacity data hiding scheme in encrypted image based on compressive sensing (CS) is proposed by fully utilizing the adaptability of CS to nonequivalent resources. The original image is divided into two parts: one part is encrypted with traditional stream cipher; the other part is turned to the prediction error and then encrypted based on CS to vacate room simultaneously. The collected non-image data is firstly encrypted with simple stream cipher. For data security management, the encrypted non-image data is then embedded into the encrypted image, and… More >

Weijie Chen¹, Guo Feng¹, Chao Zhang¹, Pingzeng Liu^1,*, Wanming Ren², Ning Cao³, Jianrui Ding⁴

CMC-Computers, Materials & Continua, Vol.58, No.1, pp. 229-248, 2019, DOI:10.32604/cmc.2019.03743

Abstract In order to effectively solve the problems which affect the stable and healthy development of garlic industry, such as the uncertainty of the planting scale and production data, the influence factors of price fluctuation is difficult to be accurately analyzed, the difficult to predict the trend of price change, the uncertainty of the market concentration, and the difficulty of the short-term price prediction etc. the big data platform of the garlic industry chain has been developed. Combined with a variety of data acquisition technology, the information collection of influencing factors for garlic industry chain is realized. Based on the construction… More >

Jieren Cheng^1,2, Ruomeng Xu^1,*, Xiangyan Tang¹, Victor S. Sheng³, Canting Cai¹

CMC-Computers, Materials & Continua, Vol.55, No.1, pp. 95-119, 2018, DOI:10.3970/cmc.2018.055.095

Abstract Distributed denial-of-service (DDoS) is a rapidly growing problem with the fast development of the Internet. There are multitude DDoS detection approaches, however, three major problems about DDoS attack detection appear in the big data environment. Firstly, to shorten the respond time of the DDoS attack detector; secondly, to reduce the required compute resources; lastly, to achieve a high detection rate with low false alarm rate. In the paper, we propose an abnormal network flow feature sequence prediction approach which could fit to be used as a DDoS attack detector in the big data environment and solve aforementioned problems. We define… More >

Qiankai Nie¹, Xuba Xu¹, Bingwen Feng^1,*, Leo Yu Zhang²

CMC-Computers, Materials & Continua, Vol.55, No.1, pp. 59-70, 2018, DOI:10.3970/cmc.2018.055.059

Abstract In this paper, an effective intra prediction mode-based video strganography is proposed. Secret messages are embedded during the intra prediction of the video encoding without causing large embedding impact. The influence on the sum of absolute difference (SAD) in intra prediction modes (IPMs) reversion phenomenon is sharp when modifying IPMs. It inspires us to take the SAD prediction deviation (SPD) to define the distortion function. What is more, the mapping rule between IPMs and the codewords is introduced to further reduce the SPD values of each intra block. Syndrome-trellis code (STC) is used as the practical embedding implementation. Experimental results… More >

G. Jayaprakash¹, M. P. Muthuraj^2,*

CMC-Computers, Materials & Continua, Vol.54, No.1, pp. 83-102, 2018, DOI:10.3970/cmc.2018.054.083

Abstract This paper discusses the applicability of relevance vector machine (RVM) based regression to predict the compressive strength of various self compacting concrete (SCC) mixes. Compressive strength data various SCC mixes has been consolidated by considering the effect of water cement ratio, water binder ratio and steel fibres. Relevance vector machine (RVM) is a machine learning technique that uses Bayesian inference to obtain parsimonious solutions for regression and classification. The RVM has an identical functional form to the support vector machine, but provides probabilistic classification and regression. RVM is based on a Bayesian formulation of a linear model with an appropriate… More >

Haolong Chen^1,2, Bo Yu¹, Huanlin Zhou^1*, Zeng Meng¹

CMC-Computers, Materials & Continua, Vol.53, No.4, pp. 271-290, 2017, DOI:10.3970/cmc.2017.053.271

Abstract The cuckoo search algorithm (CS) is improved by using the conjugate gradient method(CGM), and the CS-CGM is proposed. The unknown inner boundary shapes are generated randomly and evolved by Lévy flights and elimination mechanism in the CS and CS-CGM. The CS, CGM and CS-CGM are examined for the prediction of a pipe’s inner surface. The direct problem is two-dimensional transient heat conduction in functionally graded materials (FGMs). Firstly, the radial integration boundary element method (RIBEM) is applied to solve the direct problem. Then the three methods are compared to identify the pipe’s inner surfacewith the information of measured temperatures. Finally,… More >

Susom Dutta¹, A. Ramach,ra Murthy², Dookie Kim³, Pijush Samui⁴

CMC-Computers, Materials & Continua, Vol.53, No.2, pp. 157-174, 2017, DOI:10.3970/cmc.2017.053.167

Abstract In the present scenario, computational modeling has gained much importance for the prediction of the properties of concrete. This paper depicts that how computational intelligence can be applied for the prediction of compressive strength of Self Compacting Concrete (SCC). Three models, namely, Extreme Learning Machine (ELM), Adaptive Neuro Fuzzy Inference System (ANFIS) and Multi Adaptive Regression Spline (MARS) have been employed in the present study for the prediction of compressive strength of self compacting concrete. The contents of cement (c), sand (s), coarse aggregate (a), fly ash (f), water/powder (w/p) ratio and superplasticizer (sp) dosage have been taken as inputs… More >

Q.W. Yang¹, S.G. Du^1,2

CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 217-236, 2015, DOI:10.3970/cmc.2015.047.217

Abstract Size effect is a major issue in concrete structures and occurs in concrete in any loading conditions. In this study, size effect on concrete cubic compressive strength is modeled with a back-propagation neural network. The main advantage in using an artificial neural network (ANN) technique is that the network is built directly from experimental data without any simplifying assumptions via the self-organizing capabilities of the neural network. The proposed ANN model is verified by using 27 experimental data sets collected from the literature. For the large specimens, a modified ANN is developed in the paper to further improve the forecast… More >