GIORDANO WOSGRAU CALLONI^1,*, MARCO AUGUSTO STIMAMIGLIO^2,*

BIOCELL, Vol.46, No.6, pp. 1375-1381, 2022, DOI:10.32604/biocell.2022.019681 - 07 February 2022

Abstract Mesenchymal stem cells (MSCs) and their byproducts have been widely validated as potential therapeutic products for regenerative medicine. The therapeutic effects result mainly from the paracrine activity of MSCs, which consists of the secretion of bioactive molecules, whether dispersed in medium conditioned by cell culture or encapsulated in extracellular vesicles. The composition of the MSC secretome, which represents the set of these secreted cellular products, is crucial for the performance of the desired therapeutic functions. Different cell culture strategies have been employed to adjust the secretome composition of MSCs to obtain the best therapeutic responses More >

OK-HYEON KIM^1,2,#, EUN RAN KIM^3,#, JUN HYUNG PARK², HYUN JUNG LEE^1,2,*

BIOCELL, Vol.46, No.6, pp. 1439-1443, 2022, DOI:10.32604/biocell.2022.018921 - 07 February 2022

Abstract Exogenously delivered mesenchymal stromal cells (MSCs) are therapeutically beneficial owing to their paracrine effect; they secrete various cytokines, nucleic acids, and proteins. Multiple bioengineering techniques can help MSC cultures to release secretomes by providing stem cell niche-like conditions (both structurally and functionally). Various scaffolds mimic the natural extracellular matrix (ECM) using both natural and synthetic polymers, providing favorable environments for MSC proliferation and differentiation. Depending on material properties, either topographically or elastically structured scaffolds can be fabricated. Three-dimensional scaffolds have tunable substrate rigidities and structures, aiding MSC cultivation. Decellularized ECM-derived hydrogels are similar to the More >

Qingxi Hu^1,2,3, Yiming Wang¹, Dongchao Yang⁴, Haiguang Zhang^1,2,3,*, Zhicheng Song⁴, Yan Gu^4,*

Journal of Renewable Materials, Vol.9, No.1, pp. 1-16, 2021, DOI:10.32604/jrm.2021.013319 - 30 November 2020

Abstract Acellular dermal matrix (ADM) as a biomaterial is currently believed to be promising tissue repair improvement. With the development of tissue engineering, ADM is increasingly used as biological scaffolds. We explored the feasibility and performance of ADM biological scaffolds that fabricated by 3D printing. This paper presented our study on the printability of 3D printed ADM scaffolds, with a focus on identifying the influence of printing parameters/conditions on printability. To characterize the printability, we examined the fiber morphology, pore size, strand diameter, and mechanical property of the printed scaffolds. Our results revealed that the printability… More >

Xiaodong Wang^1,2, Meng Su², Chuntai Liu², Changyu Shen², Xianhu Liu^2,*

Journal of Renewable Materials, Vol.8, No.1, pp. 89-99, 2020, DOI:10.32604/jrm.2020.08493 - 01 January 2020

Abstract Poly (vinyl alcohol) (PVA)/reduced graphene oxide (rGO) nanocomposites is prepared by the immersion of PVA/graphene oxide (GO) nanocomposites in the reducing agent aqueous solution. The PVA/graphene nanocomposites can be used as scaffold after treatment by chemical crosslinking agents. The surface hydrophilicity of the nanocomposite scaffolds decreased with the addition of GO or rGO by measuring the contact angles of scaffolds. The electrical conductivity of PVA/rGO nanocomposite scaffold increased with rGO content increased. The highest conductivity of PVA/rGO nanocomposite scaffolds with 10 wt% rGO could reach to 12.16 × 10⁻³ S/m. The NIH-3T3 fibroblasts attach and grow More >

Lilan Gao^1,2,*, Qingxian Yuan^1,2, Ruixin Li^3,*, Lei Chen^1,2, Chunqiu Zhang^1,2, Xizheng Zhang^1,2

Molecular & Cellular Biomechanics, Vol.15, No.2, pp. 85-98, 2018, DOI:10.3970/mcb.2018.00329

Abstract Silk fibroin-typeⅡcollagen scaffold was made by 3D printing technique and freeze-drying method, and its mechanical properties were studied by experiments and theoretical prediction. The results show that the three-dimensional silk fibroin-typeⅡ collagen scaffold has good porosity and water absorption, which is (89.3%+3.26%) and (824.09%+93.05%), respectively. With the given strain value, the stress of scaffold decreases rapidly firstly and then tends to be stable during the stress relaxation. Both initial and instantaneous stresses increase with increase of applied strain value. The creep strains of scaffold with different stress levels show the two stages: the rapidly increasing… More >

Pranav S. Sapkal^1,*, Abhaykumar M. Kuthe¹, Shantanu Mathankar², Akash A. Deshmukh

Molecular & Cellular Biomechanics, Vol.14, No.2, pp. 125-136, 2017, DOI:10.3970/mcb.2017.014.123

Abstract β-TCP-Zirconia scaffolds with different architectures were fabricated by means of 3D-Bioplotting in order to enhance the mechanical and in-vitro ability of the scaffold to heal large size bone defects. In the present study scaffold architecture with different strand orientations (0°-90°, 0°-45°-135°-180°, 0°-108°-216° and 0°-72°-144°-36°-108°) were fabricated, characterized and evaluated for mechanical strength and cell proliferation ability. β-TCP powder (25 µm) and PVA (Polyvinyl Alcohol) was acquired from Fisher Scientific, India. Zirconia (18 to 32 µm) was procured from Lobachemie, India. In brief 7.5%, PVA in distilled water was used as a binder and was mixed… More >

Odin RAMÍREZ-FERNÁNDEZ^1,*, Rafael GODÍNEZ¹, Esmeralda ZUÑIGA-AGUILAR¹, Luis E. GÓMEZ-QUIROZ², María C. GUTIÉRREZ-RUIZ², Juan MORALES³, Roberto OLAYO³

BIOCELL, Vol.39, No.2-3, pp. 9-14, 2015, DOI:10.32604/biocell.2015.39.009

Abstract We have designed and evaluated a radial-flow bioreactor for three-dimensional liver carcinoma cell culture on a new porous coated scaffold. We designed a culture chamber where a radial flow of culture medium was continuously delivered through it. Once this system was established, flow was simulated using flow dynamics software based on numeric methods to solve Navier-Stockes flow equations. Perfusion within cell culture scaffolds was simulated using a flow velocity of 7 mL/min and found that cell culture medium was distributed unhindered in the bioreactor chamber. Afterwards, the bioreactor was built according to the simulated design More >

Idalba A. Hidalgo A.^∗, Felipe Sojo^†, Francisco Arvelo^†, Marcos A. Sabino^∗,‡

Molecular & Cellular Biomechanics, Vol.10, No.2, pp. 85-105, 2013, DOI:10.3970/mcb.2013.010.085

Abstract The electrospinning technique is a method used to produce nano and microfibers using the influence of electrostatic forces. Porous three dimensional networks of continuous and interconnected fibers as scaffolds were obtained from a poly (lactic acid) solution. The concentration of the polymeric solution, 12.5% m/w, as well as the conditions of voltage (V=11kV) and tip-metallic collector distance (H=13cm) were established to develop these scaffolds through the electrospinning process. The characteristics of the scaffolds, such as fiber diameter, sintering and the biomimetics of the characteristics of a native extra cellular matrix were verified by Scanning Electron More >

Mohammad Izadifar^a,b,*, Xiongbiao Chen^a,b

Frontiers in Heat and Mass Transfer, Vol.3, No.4, pp. 1-7, 2012, DOI:10.5098/hmt.v3.4.3004

Abstract Heat can be potentially used for accelerating biodegradation of implanted tissue engineered scaffolds. Cyclic and continuous radio frequency (RF) heating was applied to implanted chitosan and alginate scaffolds at 4 applied voltages, 3 frequencies, and 2 thermally conditioning environments. A 3D finite element model was developed to simulate the RF treatment. A uniform RF heating was achieved at the scaffold top. For alginate, voltage was the only significant RF heating factor while both frequency and voltage significantly affected RF heating of chitosan. Less temperature gradient across the scaffold was achieved at a conditioning environment at More >

K.W. Luczynski¹, A. Dejaco¹, O. Lahayne¹, J. Jaroszewicz², W.Swieszkowski², C. Hellmich¹

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.6, pp. 505-529, 2012, DOI:10.3970/cmes.2012.087.505

Abstract A 71 volume-% macroporous tissue engineering scaffold made of poly-l-lactide (PLLA) with 10 mass-% of pseudo-spherical tri-calcium phosphate (TCP) inclusions (exhibiting diameters in the range of several nanometers) was microCT-scanned. The corresponding stack of images was converted into regular Finite Element (FE) models consisting of around 100,000 to 1,000,000 finite elements. Therefore, the attenuation-related, voxel-specific grey values were converted into TCP-contents, and the latter, together with nanoindentation tests,entered a homogenization scheme of the Mori-Tanaka type, as to deliver voxel-specific (and hence, finite element-specific) elastic properties. These FE models were uniaxially loaded, giving access to the… More >