M.S. Raju & Dan Bulzan

The International Conference on Computational & Experimental Engineering and Sciences, Vol.19, No.4, pp. 109-110, 2011, DOI:10.3970/icces.2011.019.109

Abstract The paper presents the results from a validation study undertaken as a part of the NASA's fundamental aeronautics initiative on high altitude emissions in order to assess the accuracy of several atomization models used in both sub-cooled and superheat spray calculations. As a part of this investigation we have undertaken the validation based on four different cases to investigate the spray charactereristics of (1) a ashing jet generated by the sudden release of pressurized R134A from cylindrical nozzle, (2) a liquid jet atomizing in a subsonic cross ow, (3) a Parker-Hannin pressure swirl atomizer, and (4) a single-element LDI (Lean… More >

Hun Jung¹, Jin Seok Kim¹, Jeong Soo Kim², Jeong Park³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.11, No.4, pp. 125-126, 2009, DOI:10.3970/icces.2009.011.125

Abstract An injector plays an important role in the process of an efficient combustion in liquid-rocket engines (LRE) because it affects the evaporation rate of liquid fuel through spatial distribution and atomization of spray droplets. This paper is focused on the injection performance of a small LRE-Injector by employing the spray characteristic parameters made up of the velocity components, mean diameter, turbulence intensity, span (width of drop size distribution), number density, and volume flux of spray droplets. An experimental investigation is carried out with the aid of a dual-mode phase Doppler anemometry (DPDA) according to the injection pressure variation and along… More >

Noé Navarro-Guajardo¹, Edgar Miguel García-Carrillo², Carlos Espinoza-González^2,*, Rubén Téllez-Zablah¹, Fátima Dávila-Hernández², Jorge Romero-García², Antonio Ledezma-Pérez²

Journal of Renewable Materials, Vol.6, No.3, pp. 226-236, 2018, DOI:10.7569/JRM.2017.634164

Abstract Efforts to improve crop yields with efficient use of fertilizers are needed to guarantee global food security. Enhanced slow-release fertilizer systems (SRFs) encapsulated in biodegradable matrices are being developed to address this global concern. From a wide range of strategies for SRFs development, we explored a nature-inspired solution based on the plant cuticle model and its function as a membrane for water and nutrient transport control. Here, Candelilla wax, extracted from Candelilla wild plants (Euphorbia antisyphilitica), is studied as a renewable slow-release matrix for fertilizers encapsulated by a modified spray chilling process. From this process, microencapsulates containing 40 wt% of… More >

Ying Mao¹, Chaojing Li¹, Peng Ge¹, Fujun Wang^1,*, Lu Wang^1,*

Molecular & Cellular Biomechanics, Vol.15, No.3, pp. 143-154, 2018, DOI: 10.3970/mcb.2018.03987

Abstract Heparin/ PEG-PCL core-shell microcarriers were fabricated in one-step via coaxial-electrospraying technology. Optimization of the coaxial-electrospraying processing is by controlling the PEG-PCL concentration, applied voltage, receiving distance, and feed rate. The influence of the electrospray parameters on microsphere morphology was studied by optical microscopy and scanning electron microscopy. The functional groups and components of the electrosprayed microspheres were characterized by Fourier transform infrared spectroscopy (FTIR). Transmission electron microscope (TEM) observation proved the core-shell structure of heparin-loaded PEG-PCL microspheres. Drug loading and releasing study demonstrated that PEG-PCL concentration could control the encapsulation efficiency and releasing activity of the heparin in the microspheres.… More >

R. Djebali¹, B. Pateyron², M. ElGanaoui³

CMC-Computers, Materials & Continua, Vol.25, No.2, pp. 159-176, 2011, DOI:10.3970/cmc.2011.025.159

Abstract Axisymetric lattice Boltzmann (LB) model is developed to investigate the interaction of momentum and heat between plasma hot gas and Alumina powders. The plasma flow is simulated using a double population lattice Boltzmann model and the plasma-particles interaction is modeled based on a Lagrangian approach for the motion and heat transfer equations. The present results show that the LB method is an efficient and powerful tool to comprehend and explain the very high complexity of the plasma jet physics as well as it preserves effectively the computational cost. The present results for the centerline temperature and velocity profiles agree well… More >

Sadık Alper YILDIZEL¹, Muhammet Ensar YİĞİT², Gökhan KAPLAN³

CMES-Computer Modeling in Engineering & Sciences, Vol.113, No.2, pp. 203-218, 2017, DOI:10.3970/cmes.2017.113.211

Abstract Glass fibre reinforced concrete placement technique generates losses due to rebound effects of the already sprayed concrete particles. Rebounded concrete amount cause a significant difference between the initial mix design and emplaced mix compositions. Apart from the structural differences, it comes with a cost increase which was resulted by the splashed concrete amount. Many factors such as viscosity and quantity of mixes dominate this rebound amount in sprayed glass fibre reinforced concrete applications depending on production technologies and processes; however, this research focuses on the spray distance and the angle of the spray gun which mainly effects the rebound amount… More >

Davood Kalantari¹, Cameron Tropea²

FDMP-Fluid Dynamics & Materials Processing, Vol.10, No.1, pp. 37-61, 2014, DOI:10.3970/fdmp.2014.010.037

Abstract This study presents a combined experimental and theoretical investigation on the formation and spreading of a liquid film on a flat and rigid wall due to spray impact. A dual-mode phase Doppler instrument is used to characterise the spray while the average film thickness is measured using a high-speed CCD camera. The experimental results are complemented with theoretical expressions derived under the assumption that the spray is stationary. A new model for the prediction of the average wall film thickness is formulated taking into account the mean Reynolds number of the impacting drops, the flux density of the impacting droplets,… More >

Robert Rundqvist¹, Andreas Mark¹, Fredrik Edelvik¹, Johan S. Carlsson¹

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.3, pp. 259-278, 2011, DOI:10.3970/fdmp.2011.007.259

Abstract Multiphase flow simulation using Smoothed Particle Hydrodynamics (SPH) has gained interest during recent years, mostly due to the inherent flexibility of the method and the physically rather intuitive formulation of extra constitutive equations needed when dealing with for instance non-Newtonian flows. In the work presented here, simulations based on an SPH model implemented in the flow solver IBOFlow has been used for simulation of robotic application of sealing material on a car body. Application of sealing materials is done in order to prevent water leakage into cavities of the body, and to reduce noise. In off-line programming of the robots… More >

Shadia J Ikhmayies¹, Naseem M. Abu El-Haija², Riyad N. Ahmad-Bitar³

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.2, pp. 219-232, 2010, DOI:10.3970/fdmp.2010.006.219

Abstract Large area and highly uniform polycrystalline ZnO thin films have been produced by a spray pyrolysis (SP) technique resorting to a customized system (spraying) on glass substrates at temperature Ts= 450℃. This study deals with the related investigation about the influence of heat treatment (in nitrogen atmosphere) on the resulting properties (electrical, optical and structural) of such films. Properties are analyzed by means of I-V plots, transmittance curves, X-Ray diffractograms (XRD) and scanning electron microscope (SEM) micrographs. Results show that the resistivity of the films decreases from about 200W.cm for the as-deposited films to about 95W.cm for annealed films. XRD… More >

ShadiaJ. Ikhmayies¹, Naseem M. Abu El-Haija¹, Riyad N. Ahmad-Bitar¹

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.2, pp. 165-178, 2010, DOI:10.3970/fdmp.2010.006.165

Abstract Undoped polycrystalline ZnO thin films were produced on glass substrates at a substrate temperature Ts= 450 C by the spray pyrolysis (SP) technique. The films were characterized by analyzing their I-V curves, transmittance, X-ray diffractograms (XRD) and their scanning electron microscope (SEM) images. The I-V plots are all linear and the resistivity was found to be about 200W.cm. The transmittance in the visible and near infrared regions is as high as 85% which is suitable for solar cell applications. The absorption coefficient which is deduced from the transmittance measurements is continuously increasing with the photon's energy and it rapidly increases… More >