M. Negin¹, S. D. Akbarov^2,3, M. E. Erguven¹

CMC-Computers, Materials & Continua, Vol.42, No.1, pp. 25-62, 2014, DOI:10.3970/cmc.2014.042.025

Abstract Within the framework of the piecewise homogeneous body model the influence of the shear-spring type imperfect contact conditions on the dispersion relation of the generalized Rayleigh waves in the system consisting of the initially stressed covering layer and initially stressed half plane is investigated. The second version of the small initial deformation theory of the three-dimensional linearized theory of elastic waves in initially stressed bodies is applied and the elasticity relations of the materials of the constituents are described by the Murnaghan potential. The magnitude of the imperfectness of the contact conditions is estimated through the shear-spring type parameter. Consequently,… More >

Yuvaraj P¹, A Ramachra Murthy², Nagesh R Iyer³, S.K. Sekar⁴, Pijush Samui⁵

CMC-Computers, Materials & Continua, Vol.41, No.3, pp. 193-214, 2014, DOI:10.3970/cmc.2014.041.193

Abstract This paper presents fracture mechanics based Artificial Neural Network (ANN) model to predict the fracture characteristics of high strength and ultra high strength concrete beams. Fracture characteristics include fracture energy (Gf), critical stress intensity factor (KIC) and critical crack tip opening displacement (CTODc). Failure load of the beam (Pmax) is also predicated by using ANN model. Characterization of mix and testing of beams of high strength and ultra strength concrete have been described. Methodologies for evaluation of fracture energy, critical stress intensity factor and critical crack tip opening displacement have been outlined. Back-propagation training technique has been employed for updating… More >

Jung Soo Lee¹, Sung Yong Park², Keunhee Cho², Jeong-Rae Cho², Seung Hee Kwon^1,3

CMC-Computers, Materials & Continua, Vol.41, No.2, pp. 85-110, 2014, DOI:10.3970/cmc.2014.041.085

Abstract The objective of this study is to investigate the differences between the tensile stress-crack opening relationships of the small size notched beam and the real size beam which were made of two ultra-high performance fiber reinforced concretes (UHPFRCs) having different volume fractions and lengths of fibers. The stress-crack opening relationships of two UHPFRCs were first obtained from the inverse analysis for the small size notched beam tests. In addition, the three types of real size beams were manufactured for each mix: (1) plain beam, (2) beam with tensile reinforcement, and (3) beam with both tensile and compressive reinforcements. The flexural… More >

X.P. Shen^1,2, X.C. Wang¹

CMC-Computers, Materials & Continua, Vol.39, No.2, pp. 135-152, 2014, DOI:10.3970/cmc.2014.039.135

Abstract Emphases of this study were placed on the modelling of plastic damage behaviour of prestressed structural concrete, with special attention being paid to the stress-triaxiality dependent plastic hardening law and the corresponding damage evolution law. A definition of stress triaxiality was proposed and introduced in the model presented here. Drucker-Prager -type plasticity was adopted in the formulation of the plastic damage constitutive equations. Numerical validations were performed for the proposed plasticity-based damage model with a driver subroutine developed in this study. The predicted stress-strain behaviour seems reasonably accurate for the uniaxial tension and uniaxial compression compared with the experimental data… More >

E. Ferretti¹

CMC-Computers, Materials & Continua, Vol.36, No.3, pp. 293-322, 2013, DOI:10.3970/cmc.2013.036.293

Abstract The Cell Method is applied in order to model the debonding mechanism in ceramic floor tiles subjected to positive thermal variation. The causes of thermal debonding, very usual in radiant heat floors, have not been fully clarified at the moment. There exist only a few simplified analytical approaches that assimilate this problem to an eccentric tile compression, but these approaches introduce axial forces that, in reality, do not exist. In our work we have abandoned the simplified closed form solution in favor of a numerical solution, which models the interaction between tiles and sub-base more realistically, when the positive thermal… More >

Chyanbin Hwu¹, Tai-Liang Kuo²

CMC-Computers, Materials & Continua, Vol.36, No.2, pp. 135-153, 2013, DOI:10.3970/cmc.2013.036.135

Abstract The problems of the interface corners between two dissimilar anisotropic viscoelastic materials are studied in this paper. Through the use of the well-known correspondence principle between linear elasticity and linear viscoelasticity, fracture parameters in the Laplace domain can be obtained from the path-independent H-integral for the corresponding problems of anisotropic linear elastic materials. Further application of the correspondence relations for fracture parameters proposed in our recent study then leads us the solutions of fracture parameters in the time domain. To show the applicability and accuracy of the proposed method, several different kinds of numerical examples are presented such as a… More >

S.D. Akbarov^1,2, E. Hazar³, M. Eröz³

CMC-Computers, Materials & Continua, Vol.36, No.1, pp. 23-48, 2013, DOI:10.3970/cmc.2013.036.023

Abstract Within the scope of the piecewise homogeneous body model with utilizing of the three dimensional linearized theory of elastic waves in initially stressed bodies the influence of the shear-spring type imperfection of the contact conditions between the layers of the pre-stressed bi-layered plate strip resting on the rigid foundation, on the frequency response of this plate strip is investigated. The corresponding mathematical problem is solved numerically by employing FEM and numerical results illustrating the influence of the parameter characterizing the degree of the mentioned imperfectness, on the frequency response of the normal stress acting on the interface planes between the… More >

L. N. McCartney¹

CMC-Computers, Materials & Continua, Vol.35, No.3, pp. 183-227, 2013, DOI:10.3970/cmc.2013.035.183

Abstract Analytical stress transfer models are described that enable estimates to be made of the stress and displacement fields that are associated with fibre fractures or matrix cracks in unidirectional fibre reinforced composites. The models represent a clear improvement on popular shear-lag based methodologies. The model takes account of thermal residual stresses, and is based on simplifying assumptions that the axial stress in the fibre is independent of the radial coordinate, and similarly for the matrix. A representation for both the stress and displacement fields is derived that satisfies exactly the equilibrium equations, the required interface continuity equations for displacement and… More >

Jia-Liang Le¹, Bing Xue¹

CMC-Computers, Materials & Continua, Vol.34, No.3, pp. 251-264, 2013, DOI:10.3970/cmc.2013.034.251

Abstract It has been recently shown that the nominal structural strength of metal-composite structures depends on the structure size, and such dependence is strongly influenced by the stress singularities. Nevertheless, previous studies only focused on structures that exhibit very strong stress singularities, which are close to the crack-like stress singularity. In the actual engineering designs, due to the mismatch of material properties and complex structural geometries, many metalcomposite structures may contain stress singularities that are much weaker than the crack-like stress singularity. This paper presents a numerical study on the size dependence of scaling of fracture of metal-composite hybrid structures for… More >

Bingfei Liu¹, Guansuo Dui^2,3, Benming Xie¹, Libiao Xin³, Lijun Xue³

CMC-Computers, Materials & Continua, Vol.34, No.1, pp. 83-94, 2013, DOI:10.3970/cmc.2013.034.083

Abstract Functionally Graded Materials (FGMs) are being used in an everexpanding set of applications. For better applications, an analytical methodology using averaging technique of composites is developed to describe the thermo-elastic and thermo-elastoplastic behaviors of a three-layered FGM system subjected to thermal loading Solutions using averaging technique of composites for the stress distributions in a generic FGM system subjected to arbitrary temperature loading conditions are presented. The power-law strain hardening behaviour is assumed for the FGM metallic phase and the stress of the metallic phase are calculated to judge the plastic in this work The stress distributions within the FGM systems… More >