Jinxing Li¹, Jun Zhang^1,*, Yunxia Zhou¹, Zhaoling Zhou¹, Hisham Essawy², Xiaojian Zhou^1,*, Guanben Du¹

Journal of Renewable Materials, Vol.8, No.9, pp. 1019-1032, 2020, DOI:10.32604/jrm.2020.012374

Abstract Simple bio-based abrasive grinding wheel based on thermosetting resin matrix was developed starting with condensed tannin and furfuryl alcohol, which are mainly derived from forest and agricultural products like tree barks, wheat and crops. Fourier transform infrared spectra (FTIR) signified the acidic conditions are quiet efficient for the reaction of furfuryl alcohol, urea and glyoxal all together and the -CH₂-NH- and -CH₂-O-CH(OH)- groups are predominating in cross-linking of the tannin-furfuryl alcohol-urea-glyoxal (TFUG) resin. The strengthening contribution of the tannin was also confirmed by the preservation of its distinct crystallinity using X-ray diffraction (XRD). Differential scanning calorimetry (DSC) and thermogravimetric analysis… More >

F.-J. Santiago-Medina¹, A. Pizzi^1,2,*, S. Abdalla²

Journal of Renewable Materials, Vol.5, No.5, pp. 435-447, 2017, DOI:10.7569/JRM.2017.634166

Abstract An adhesive based on the reaction of a very fast reacting procyanidin-type condensed tannin, namely purified pine bark tannin, with a biosourced nontoxic and nonvolatile aldehyde derived from the pulp and paper industry, namely hydroxymethylfurfural (HMF), was shown to almost satisfy the relevant standards for bonding wood particleboard. The conditions of pH used are determinant for the result. The oligomers obtained by the reaction and their distribution have been determined by matrix-assisted laser ionization desorption time-of-flight (MALDI-TOF) mass spectrometry. Of the two reactive groups of hydroxymethylfurfural capable of reacting, the furanic aldehyde one and the furanic hydroxymethyl alcohol group, only… More >

Engozogho Anris Starlin Peguy^1,2, Bikoro Bi Athomo Arsene^1,2, Vidal Marcia⁵, Denaud Louis⁴, Safou Tchiama Rodrigue^2,3, Charrier Bertrand¹

Journal of Renewable Materials, Vol.7, No.6, pp. 517-522, 2019, DOI:10.32604/jrm.2019.04051

Abstract In order to promote convenient strategies for the utilization of wood wastes from aucoumea klaineana pierre (okoume) timber industry, various chemical analysis were carried out on samples from different origins. Total extractives content of the bark, sapwood and heartwood of okoume were evaluated. thermogravimetric analyses were performed and the stiasny number was calculated. it was found that the bark was richer in fatty acid of high molecular weight while the sapwood was rich in fatty acid of low molecular weight. the condensed tannins content varied according to the origin and the part of the tree. these new findings should be… More >

Antonio Pizzi*

Journal of Renewable Materials, Vol.7, No.5, pp. 477-492, 2019, DOI:10.32604/jrm.2019.06511

Abstract This review details the development of tannin-based biofoams for fire resistance and acoustic insulation and details the different varieties of these foams that have been developed, from tannin-furanic self-blowing foams to tannin-furanic polyurethanes and finally non-isocyanate tannin-based-carbohydrates polyurethanes (NIPU). More >

M. Thébault^1,2, A. Pizzi1^3*, F.J. Santiago-Medina¹, F.M. Al-Marzouki³, S. Abdalla³

Journal of Renewable Materials, Vol.5, No.1, pp. 21-29, 2017, DOI:10.7569/JRM.2016.634116

Abstract Isocyanate-free polyurethane resins biosourced to a very high percentage level were prepared by the reaction of aminated mimosa tannin extract with commercial mimosa tannin extract prereacted with dimethyl carbonate. The reaction took place with ease at ambient temperature. Indications were that the polyurethanes obtained formed a hard film when cured at a temperature higher than 100 °C. Furthermore, the carbohydrate fraction of the tannin extract also appeared to be carbonated and reacted to generate isocyanate-free polyurethane linkages with the aminated tannins. This indicated that not only the polyphenolic fraction of the tannin extract, but also its other major component, can… More >

M.A. Pérez-Limiñana^*, M.M. Sánchez-Navarro, M.J. Escoto-Palacios, F. Arán-Aís, C. Orgilés-Barceló

Journal of Renewable Materials, Vol.4, No.1, pp. 3-8, 2016, DOI:10.7569/JRM.2015.634119

Abstract The tanning i ndustry generates very large quantities of industrial wastes. The advancement of European policy and legislation protecting the environment has prompted the transformation of tannery solid waste materials into valuable co-products, useful to be recycled or employed in other industries. The objective of this work is to obtain gelatine from tannery wastes, in order to reuse it as natural microencapsulating agent in the production of active materials with functional properties. Concretely, this paper focuses on the influence of the extraction temperature on gelatine properties and its microencapsulating ability. An alternative enzymatic pre-treatment to the conventional alkaline one is… More >