Elham Azadeh¹, Xinyi Chen², Antonio Pizzi^2,*, Christine Gérardin¹, Philip Gérardin¹, Hisham Essawy³

Journal of Renewable Materials, Vol.10, No.12, pp. 3217-3227, 2022, DOI:10.32604/jrm.2022.022740

Abstract Non-isocyanate polyurethane (NIPU) foams using a hydrolysable tannin, also vulgarly called tannic acid, namely here commercial chestnut wood tannin extract was prepared. Compression strength did not appear to depend on the foam apparent density while the formulation composition of the NIPU foams has been shown to be more determinant. These NIPU foams appeared to be self-extinguishing once the high temperature flame is removed. The ignition time gave encouraging results but for improved fire resistance the foams may need some fire-retardant addition. FTIR spectrometry showed the formation of non-isocyanate urethane linkages. Thermogravimetric analysis indicated a good thermal resistance of these foams,… More >

Bowen Liu¹, Yunxia Zhou¹, Hisham Essawy², Shang Feng¹, Xuehui Li¹, Jingjing Liao¹, Xiaojian Zhou^1,3,*, Jun Zhang^1,*, Sida Xie¹

Journal of Renewable Materials, Vol.10, No.11, pp. 3009-3024, 2022, DOI:10.32604/jrm.2022.019848

Abstract This study presents easily prepared free formaldehyde bio-based foam based on a prepared thermosetting resin comprising tannin–lignin–furfuryl alcohol-glyoxal (TLFG) via mechanical stirring in presence of ether as a foaming agent. The foam was developed through a co-polycondensation reaction of glyoxal and furfuryl alcohol with condensed tannin and lignin, which is a forest-derived product. Investigation using scanning electron microscopy (SEM) showed more closed-cell structure without cracks and collapse in the TLFG foam, with a higher apparent density with respect to tannin–furanic–formaldehyde (TFF) foam. Differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DTMA), and thermogravimetric analysis (TGA) investigations revealed that the curing process… More >

Haizhu Wu^1,#, Jinxing Li^1,#, Shouhu Bao¹, Fuxian Yang¹, Jun Zhang¹, Hisham Essawy^2,*, Guanben Du¹, Xiaojian Zhou^1,*

Journal of Renewable Materials, Vol.10, No.8, pp. 2029-2039, 2022, DOI:10.32604/jrm.2022.019834

Abstract A cellular material in the form of 3-layered sandwich structure material was prepared via sole use of mechanical stirring without any use of a foaming agent, while Tween-80 was employed as a foam stabilizer via a developed in-situ mold casting. The resulting structure displayed a good appearance with no visual defects. The 3-layered composition of the sandwish structure, “nonporous resin layer-porous foam layer-nonporous resin layer”, was examined in terms of the microstructure, density & density distribution, pulverization ratio, mechanical strength, insulation and flame retardant performance. It was indicated from the results that the bonding between the resin layer and foam… More > Graphic Abstract

Jaša Saražin¹, Ida Poljanšek¹, Antonio Pizzi², Milan Šernek^1,*

Journal of Renewable Materials, Vol.10, No.8, pp. 2117-2131, 2022, DOI:10.32604/jrm.2022.019602

Abstract The curing process of two biobased adhesives: pine tanninhexamine (TH) and organosolv lignin non-isocyanate polyurethane (NIPU), suitable for interior nonstructural use, were compared with commercial urea-formaldehyde (UF) adhesive. Changes in chemical structure before and after the curing process were observed with Fouriertransform infrared spectroscopy (FTIR). The process of adhesive curing was monitored with differential scanning calorimetry (DSC) and the automated bonding evaluation system (ABES). Both DSC and ABES measurements confirmed UF as the fastest and NIPU as the slowest curing adhesive observed. Taking into account the ABES results, the optimal pressing parameters for the TH adhesive would be 4 min… More >

Jingjing Liao^1,2, Jinxing Li², Fuxian Yang², Yan Zhu², Hongyan Wang³, Guanben Du^1,2,*, Hisham Essawy⁴, Xiaojian Zhou^2,*

Journal of Renewable Materials, Vol.10, No.2, pp. 359-372, 2022, DOI:10.32604/jrm.2021.016335

Abstract Polyvinyl alcohol (PVA)-based films containing Chinese bayberry tannin (BT) were prepared by cross-linking using glyoxal, glutaraldehyde and dialdehyde starch, individually. The presence of cross-linkers was evident to promote the transparency and decrease the moisture content of PVA/BT films, while the water solubility stayed almost unchanged in the cross-linked PVA/BT films. All cross-linkers provided promotion of the water vapor permeability, mechanical property and thermal stability of PVA/BT films. The best water vapor barrier capacity was found in case of glutaraldehyde cross-linked PVA/BT film, while the highest tensile strength was encountered in case of glyoxal cross-linked PVA/BT films, compared with the uncross-linked… More > Graphic Abstract

Jingjing Liao^1,2, Jinxing Li², Hongyan Wang³, Yan Zhu², Hisham Essawy⁴, Guanben Du^1,2,*, Xiaojian Zhou^2,*

Journal of Renewable Materials, Vol.10, No.1, pp. 19-31, 2022, DOI:10.32604/jrm.2021.016152

Abstract The current work explores the potential use of commercial Chinese bayberry tannin (BT) to develop antioxidant PVA-based films using solvent casting process for packaging applications. The effect of BT concentration on opacity, water resistance and antioxidant capacity of resulting films was investigated. Properties like tensile strength, thermal behavior, and morphological aspects were also characterized. The experimental results showed that PVA/BT films formed with uniformly brown color and generally good transparency, offering good antioxidant ability. The PVA film containing BT presented slightly higher water resistance according to the results of moisture content and water vapor permeability, especially at low BT content… More > Graphic Abstract

Faizah A. AlMalki¹, Aziza M. Hassan^2,*, Zeinab M. Klaab¹, Soliman Abdulla³, Antonio Pizzi⁴

Journal of Renewable Materials, Vol.9, No.12, pp. 2077-2092, 2021, DOI:10.32604/jrm.2021.016173

Abstract Recently, natural substances in the form of nanoparticles are increasingly being used in different field, particularly in medicines to enhance their beneficial effects in treatment and prevention. Cancer cells of the breast (MCF-7) have been chosen to be examined and treated in vitro with conventional drug Tamoxifen (Tam) and tannin nanoparticles extract (NP99) individually or in combination. MTT reagent has been applied to assess the cell viability and propagation percentage, DNA fragmentation and mRNA relative expression of apoptotic genes to study the cell death pathway. The results showed that Tam and tannin NP99 triggered cytotoxic activity towards the MCF-7 cell.… More >

Antonio Pizzi^*

Journal of Renewable Materials, Vol.9, No.8, pp. 1345-1364, 2021, DOI:10.32604/jrm.2021.015663

Abstract Collagen powder hydrolysates were reacted with a solution of commercial mimosa bark tannin extract. The mixture was prepared at ambient temperature and prepared at 80°C to determine what reactions, if any, did occur between the collagen protein through its amino acids and the polyphenolic condensed tannin. The reaction products obtained were analyzed by matrix assisted laser desorption ionization time-of-flight (MALDI ToF) mass spectrometry. Reactions between the two materials did appear to occur, with the formation of a relatively small proportion of covalent and ionic linkages at ambient temperature but a considerable proportion of covalent linkages tannin-protein amino acids and the… More >

Achille Gnassiri Wedaïna^1,2, Antonio Pizzi², Wolfgang Nzie¹, Raidandi Danwe³, Noel Konaï^4,*, Siham Amirou², Cesar Segovia⁵, Raphaël Kueny⁵

Journal of Renewable Materials, Vol.9, No.3, pp. 477-493, 2021, DOI:10.32604/jrm.2021.012782

Abstract The Piptadeniastrum Africanum bark tannin extract was characterized using MALDI TOF, ATR-FT MIR. It was used in the development of a resin with Vachellia nilotica extract as a biohardener. This tannin is consisting of Catechin, Quercetin, Chalcone, Gallocatechin, Epigallocatechin gallate, Epicatechin gallate. The gel time of the resin at natural pH (pH = 5.4) is 660 s and its MOE obtained by thermomechanical analysis is 3909 MPa. The tenacity of Urena lobata fibers were tested, woven into unidirectional mats (UD), and used as reinforcement in the development of biocomposite. The fibers tenacity at 20, 30 and 50 mm lengths are… More >

Medjda Amari¹, Kamel Khimeche^1,*, Abdelkader Hima² , Redouane Chebout³, Abderahmane Mezroua¹

Journal of Renewable Materials, Vol.9, No.3, pp. 463-475, 2021, DOI:10.32604/jrm.2021.013680

Abstract Recently, the exploitation of renewable plant resources in the formulation of adhesives is very promising for their availability at low coast, as well as their richness in biomolecules such as polyphenols. In this way, many research studies tannins extracted from different sources such as mimosa, quebracho, and pine have been the subject of very satisfactory recent studies. In this paper, a new complete characterization of the tannins extracted from the bark of eucalyptus globulus harvested from two regions in Algeria was achieved. The structural characterization enabled us to confirm the richness in condensed tannins, particularly in procyanidin and prodelphinidin units.… More >