Yunpeng Ren, J. K. Chen^*, Yuwen Zhang

Frontiers in Heat and Mass Transfer, Vol.3, No.2, pp. 1-7, 2012, DOI:10.5098/hmt.v3.2.3001

Abstract Heat transfer in a copper film irradiated by a femtosecond (fs) laser pulse train and by an integrated dual laser beam of a nanosecond pulse with a fspulse train was studied using the semi-classical two-temperature model. The critical point model with three Lorentzian terms was employed to characterize transient optical properties for the laser energy deposition. The effects of pulse number and separation time on the thermal response were investigated. The results showed that with the same total energy in a fs-pulse train, more pulses for shorter separation time, e.g., 1 ps, and fewer pulses for longer separation time, e.g.,… More >

Alexandre Vaudrey^a,*, Philippe Baucour^b, François Lanzetta^b, Raynal Glises^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-8, 2012, DOI:10.5098/hmt.v3.3.3001

Abstract Producing electrical work in consuming chemical energy, the fuel cell (FC) is forced by the 2^nd law to reject heat to its surrounding. However, as it occurs for any other type of engine, this thermal energy cannot be exchanged in an isothermal way in finite time or through finite areas. As it was already done for various types of systems, including chemical engines, the fuel cell is here studied within the finite time thermodynamics framework. An endoreversible fuel cell is then defined, internally reversible but producing entropy during heat exchanges with its ambiance. Considering usual H₂/O₂ and H₂/air chemical reactions… More >

Yong Cui, Yongju Zhao, Shengnan Ouyang, Changchang Shao, Liangliang Li, Honglang Duan^*

Phyton-International Journal of Experimental Botany, Vol.93, No.2, pp. 291-312, 2024, DOI:10.32604/phyton.2024.047281

Abstract Plant temperature acclimation is closely related to maintaining a positive carbon gain under future climate change. However, no systematic summary of the field has been conducted. Based on this, we analyzed data on plant temperature acclimation from the Web of Science Core Collection database using bibliometric software R, RStudio and VOSviewer. Our study demonstrated that a stabilized upward trajectory was noted in publications (298 papers) from 1986 to 2011, followed by a swift growth (373 papers) from 2012 to 2022. The most impactful journals were Plant Cell and Environment, boasting the greatest count of worldwide citations and articles, the highest… More >

Zhengrong Shi^1,3, Jie Ren¹, Tao Zhang^1,3,*, Yanming Shen^2,*

Energy Engineering, Vol.121, No.3, pp. 681-702, 2024, DOI:10.32604/ee.2023.045238

Abstract Building energy consumption and building carbon emissions both account for more than 20% of their total national values in China. Building employing phase change material (PCM) for passive temperature control shows a promising prospect in meeting the comfort demand and reducing energy consumption simultaneously. However, there is a lack of more detailed research on the interaction between the location and thickness of PCM and indoor natural convection, as well as indoor temperature distribution. In this study, the numerical model of a passive temperature-controlled building integrating the developed PCM module is established with the help of ANSYS. In which, the actual… More > Graphic Abstract

Yong Qin^1,2, Xiaoyu Li^1,2, Yanhong Wu^1,2, Hai Wang³, Guiqi Han^1,2,3, Zhuyun Yan^1,2,*

Phyton-International Journal of Experimental Botany, Vol.93, No.1, pp. 119-135, 2024, DOI:10.32604/phyton.2023.046075

Abstract Root exudates serve as crucial mediators for information exchange between plants and soil, and are an important evolutionary mechanism for plants’ adaptation to environmental changes. In this study, 15 different abiotic stress models were established using various stress factors, including drought (D), high temperature (T), nitrogen deficiency (N), phosphorus deficiency (P), and their combinations. We investigated their effects on the seedling growth of Salvia miltiorrhiza Bunge and the activities of Solid-Urease (S-UE), Solid-Nitrite Reductase (S-NiR), Solid-Nitrate Reductase (S-NR), Solid-Phosphotransferase (S-PT), and Solid-Catalase (S-CAT), as well as the contents of polysaccharides in the culture medium. The results showed that the growth… More >

Jiangshuai Wang^1,*, Chuchu Cai¹, Pan Fu^2,3, Jun Li^4,5, Hongwei Yang⁴, Song Deng¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.3, pp. 537-546, 2024, DOI:10.32604/fdmp.2023.030430

Abstract Multi-gradient drilling is a new offshore drilling method. The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise control of the wellbore pressure. In this study, a new heat transfer model is proposed by which the variable mass flow is properly taken into account. Using this model, the effects of the main factors influencing the wellbore temperature are analyzed. The results indicate that at the position where the separation injection device is installed, the temperature increase of the fluid in the drill pipe is mitigated due… More >

Tianyu Zhou¹, Liang Hao¹, Xin Xu^2,3, Meng Si^2,3, Lian Zhang^2,3,*

Energy Engineering, Vol.121, No.1, pp. 145-168, 2024, DOI:10.32604/ee.2023.042798

Abstract This paper discussed the experimental results of the performance of an organic Rankine cycle (ORC) system with an ultra-low temperature heat source. The low boiling point working medium R134a was adopted in the system. The simulated heat source temperature (SHST) in this work was set from 39.51°C to 48.60°C by the simulated heat source module. The influence of load percentage of simulated heat source (LPSHS) between 50% and 70%, the rotary valve opening (RVO) between 20% and 100%, the resistive load between 36 Ω and 180 Ω or the no-load of the generator, as well as the autumn and winter… More >

Manimaran Renganathan, Thundil Karuppa Raj Rajagopal^*

Frontiers in Heat and Mass Transfer, Vol.4, No.1, pp. 1-11, 2013, DOI:10.5098/hmt.v4.1.3008

Abstract In this work, fuel spray parameters are studied by varying the fuel temperature. To overcome the tedious experimental task, a 3-D Computational Fluid Dynamics methodology is adopted by injecting fuel at specified temperatures of 313 K, 353 K and 393 K. The validation is accomplished after the optimal spatial and temporal steps of discretization are found out. At a fuel temperature of 313 K, advancing the injection timing from 6 deg bTDC to 20 deg bTDC increases cylinder peak pressure from 79.8 bar to 90.9 bar. Relation between the emission characteristics and spray SMD and temperature is studied. More >

Shihong Zhang^*，Zhihua Wang

Frontiers in Heat and Mass Transfer, Vol.4, No.2, pp. 1-6, 2013, DOI:10.5098/hmt.v4.2.3005

Abstract This article discussed exhaust gas temperature and pollutant emissions characteristics of the combustion of rich natural gas-air mixtures in Pd metal based honeycomb monoliths burner during the period of start-up process. The burner needs to be ignited by gas phase combustion with the excessive air coefficient (a) at 1.3. The chemistry at work in the monoliths was then investigated using the stagnation point flow reactor or SPFR. The experimental results in catalytic monolith can be explained from SPFR. The exhaust gas temperature and pollutant emissions were measured by thermocouple K of diameter 0.5 and the analyser every 1 minute, respectively.… More >

Edoardo Gino Macchi^* , Giovanni Braschi, Mario Gallati

Frontiers in Heat and Mass Transfer, Vol.5, pp. 1-8, 2014, DOI:10.5098/hmt.5.20

Abstract Radiofrequency thermal ablation (RFTA) is a medical procedure currently widely adopted for liver tumors treatment. Its outcome is strongly influenced by temperature distribution near the RF applicator therefore continuous measurements are required both to validate RFTA numerical models and to better control the outcome of the procedure. The space-time evolution of the thermal field during RFTA on ex vivo porcine liver tissue has been measured by infrared thermal imaging in different experimental setups. A three-dimensional simulation of the whole experiment reproduces all the features of the thermal field measurements and validates the proposed measurement methodology. More >