Shihong Zhang^* , Meixian Wei, Hui Yang

Frontiers in Heat and Mass Transfer, Vol.11, pp. 1-5, 2018, DOI:10.5098/hmt.11.20

Abstract This article discussed flow and temperature characteristics of the catalytic combustion furnace based the combustion of lean natural gas-air mixtures in catalytic honeycomb monoliths. Catalytic combustion as a developing technology could make the pollutant emissions (CO and NO_X) to near zero. Within the porous structure, the reactions then take place on the catalytic sites. A heterogeneous catalytic process includes more than one phase. Usually the catalyst is a solid and the reactants and products are in liquid or gaseous form. According to the applications of low- carbon catalytic combustion furnace, heating glazed tiles with pure solid texture, rich melodic style… More >

Xiang Zhang, Hadi Keramati, Martinus Arie, Farah Singer, Ratnesh Tiwari, Amir Shooshtari, Michael Ohadi^*

Frontiers in Heat and Mass Transfer, Vol.11, pp. 1-14, 2018, DOI:10.5098/hmt.11.18

Abstract Heat exchangers are key components of most power conversion systems, a few industrial sectors can particularly benefit from high temperature heat exchangers. Examples include conventional aerospace applications, advanced nuclear power generation systems, and high efficiency stationary and mobile modular fossil fuel to shaft power/electricity conversion systems. This paper provides a review of high temperature heat exchangers in terms of build materials, general design, manufacturing techniques, and operating parameters for the selected applications. Challenges associated with conventional and advanced fabrication technologies of high temperature heat exchangers are discussed. Finally, the paper outlines future research needs of high temperature heat exchangers. More >

Wenjing Xia^1,*, JinHui Wang¹, Tao Xu¹, Nan Jiang²

Journal of Renewable Materials, Vol.11, No.8, pp. 3387-3402, 2023, DOI:10.32604/jrm.2023.026971

Abstract To understand the effects of filler-asphalt ratio on different properties of lignin and polyester fiber reinforced shape memory polyurethane (SMPU)/styrene butadiene styrene (SBS) composite modified asphalt mortar (PSAM), as well as to reveal the reinforcing and toughening mechanisms of lignin and polyester fibers on PSAM, SMPU, SBS and mineral powder were first utilized to prepare PSAM. Then the conventional, rheological and anticracking properties of lignin fiber reinforced PSAM (LFAM) and polyester fiber reinforced PSAM (PFAM) at different filler-asphalt ratios were characterized. Test results indicate that the shear strength, deformation resistance and viscosity are increased after adding 0.8wt% lignin fiber or… More > Graphic Abstract

Suyadi Kartorono^*, Herlien Dwiarti Setio, Adang Surahman, Ediansjah Zulkifli

Structural Durability & Health Monitoring, Vol.17, No.3, pp. 195-208, 2023, DOI:10.32604/sdhm.2022.023259

Abstract This paper sums up the determining analysis of the measuring location of T_refl using a thermocouple during the thermography tests. Laboratory temperature distribution testing methods, analysis of value and location of T_refl measurement are explained in this paper. The heat source is two halogen lamps of 500 watts each fitted at a distance of 30–50 cm. Noises appearing during testing of thermography are corrected with measured T_refl value. The results of thermogram correction of corroded concrete surfaces using T_refl values are displayed in this paper too. The concrete surface temperature results of quantitative image processing method are compared to the… More >

M.A. Waheed^a, C.A. Komolafe^b,*

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-7, 2019, DOI:10.5098/hmt.12.8

Abstract The drying kinetics of three varieties of cocoa beans (N38, F and WA) at 40, 50 and 60 degree centigrade was investigated experimentally. The three different varieties were dried using laboratory air oven UF Memmert and the moisture content determined according to AOAC standards. The results show that drying processes occur mainly in the range of the falling-rate period and the drying rates were observed to be faster at higher drying temperature. The effective diffusivities of the three cocoa beans varieties determined at 40, 50 and 60 degree centigrade ranged between 9.9269 x 10^-11 and 4.4671 x 10^-10 metre square… More >

Abhishek Dasore^a,*, Ramakrishna Konijeti^b , Naveen Puppala^c

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-7, 2019, DOI:10.5098/hmt.13.21

Abstract The influence of air temperature on drying kinetics of radish slices in a bench scale convective tray dryer was examined experimentally and suitable drying model was developed. The experiments of drying of radish slices were conducted at 40, 50 and 60 °C with an air velocity of 2 More >

M. Ganapathirao^a,∗ , Ali J. Chamkha^b, N. Srinivasa Rao^c

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-13, 2019, DOI:10.5098/hmt.13.15

Abstract In this investigation, our objective is to study the effect of non-uniform slot suction or injection into a steady mixed convective MHD boundary layer flow over a vertical wedge embedded in a porous medium in the presence of chemical reaction. The wall of the wedge is embedded in a uniform porous medium in order to allow possible fluid wall suction or injection. The surface of the wedge is maintained at a variable wall temperature and concentration. The fluid is assumed to be viscous, incompressible and electrically conducting; and the magnetic field is applied transversally in the direction of the flow.… More >

H. Astuti^a, P. Sri^b, S. Kaprawi^a,†

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-8, 2019, DOI:10.5098/hmt.13.3

Abstract The natural convection of the nanofluids from a vertical accelerated plate in the presence of the radiation flux and magnetic field is observed in this study. Initially, the plate with a temperature higher than the temperature of nanofluids is at rest and then it accelerates moving upward and then the wall temperature decreases. The governing unsteady equations are solved by the explicit method based on the forward finite difference. Three different types of water-based nanofluids containing copper Cu, aluminum oxide Al₂O₃ and titanium dioxide TiO₂ are taken into consideration. The hydrodynamic and thermal performance of the nanofluids is calculated. The… More >

Huashan Li¹, Xiaoshuang Zhao^1,2, Sihao Huang^1,2, Lingbao Wang¹, Jiongcong Chen^1,*

Energy Engineering, Vol.120, No.8, pp. 1817-1835, 2023, DOI:10.32604/ee.2023.027668

Abstract Process heating constitutes a significant share of final energy consumption in the industrial sector around the world. In this paper, a high-temperature heat pump (HTHP) using flash tank vapor injection technology (FTVI) is proposed to develop low-temperature geothermal source for industrial process heating with temperature above 100°C. With heat sink output temperatures between 120°C and 150°C, the thermo-economic performance of the FTVI HTHP system using R1234ze(Z) as refrigerant is analyzed and also compared to the single-stage vapor compression (SSVC) system by employing the developed mathematical model. The coefficient of performance (COP), exergy efficiency (η_exe), net present value (NPV) and payback… More >

Medta Boupan^1,2, Kanyapak Prompang¹, Achiraya Chompunuch¹, Piwat Boonma¹, Arthit Neramittagapong^1,2,3,4, Somnuk Theerakulpisut⁵, Sutasinee Neramittagapong^1,2,3,*

Journal of Renewable Materials, Vol.11, No.7, pp. 2985-3000, 2023, DOI:10.32604/jrm.2023.026397

Abstract Isosorbide is a multi-purpose chemical that can be produced from renewable resources. Specifically, it has been investigated as a replacement for toxic bisphenol A (BPA) in the production of polycarbonate (PC). In this study, the synthesis of isosorbide by sorbitol dehydration using a cerium-based catalyst derived from calcined cerium (IV) sulfate (300°C, 400°C, 450°C, 500°C, and 650°C) was investigated. The reaction occurred in a high-pressure reactor containing nitrogen gas. Advanced instrumental techniques were applied to analyze the characteristics of the calcined catalyst. The results showed that the calcined catalysts demonstrated different crystalline structures and sulfate species at different temperatures. However,… More > Graphic Abstract